Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Palm Springs
Window replacement in Palm Springs comes down to one conversation more than any other: what your insurance company will accept. We replace jalousie and single-pane aluminum windows with impact-rated units that meet Palm Beach County’s 130+ mph wind-load design requirements, and we do it with pricing you can see on paper before the first screw comes out. If your 1950s or 1960s CBS ranch still has its original windows, call (561) 940-2917 and we’ll walk the house with you, measure every opening, and write you a line-item quote. No stock-size guesses. No surprises that weren’t authorized in writing.
Key Takeaways for Palm Springs Homeowners
- Impact-rated window replacement in Palm Springs typically runs $850-$1,600 per opening installed, depending on size and whether we find framing damage behind the stucco.
- Original jalousie windows fail Florida Building Code wind-load ratings and are a leading cause of Citizens Insurance non-renewal notices in the village.
- Most 1960s CBS ranches here need custom-sized units, not stock sizes, because the block-course rough openings were never framed to modern dimensions.
- TruePane has served Palm Springs homeowners since 2008 through our founding glazier lineage and Dale Kessler’s craft standard: if the pane is not true, the job is not done.
- Every job carries a Done Right Promise and both manufacturer warranty layers registered in writing before our truck leaves your driveway.
Why TruePane Windows & Doors Is Palm Springs’s Preferred Window Replacement Company
We’re the company Palm Springs homeowners call after a storm blows through and a jalousie slat ends up on the lawn. We know the village: the CBS ranches along Davis Road and Greenbrier Drive, the west-facing sliders that catch salt-laden humidity off the Atlantic, the original louvered windows that rattled through every hurricane watch since 1962. Our crews work in Palm Springs regularly, not as a distant outfit sending a truck when it’s convenient. When you call (561) 940-2917, a live person answers. Not a voicemail tree. Not a call center. A person who can dispatch a uniformed, background-checked technician to your street, usually within a day.
Founded by second-generation glazier Dale Kessler in 2008, TruePane carries years of community-rooted craft tradition. The standard on every job is the Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before we leave your driveway. No paperwork fights. No arguing about who covers what. If something isn’t right, our Done Right Promise means we come back and make it right, period.
Our Window Replacement Services in Palm Springs
We don’t do drive-by installs. Every Palm Springs window replacement starts with an inspection, every opening gets measured twice, and every quote shows manufacturer lines side by side on paper. Here’s what that looks like for the work Palm Springs homes actually need. For a full overview of how we approach window and door work, see our Window Replacement team’s standard practices.
Full Frame Replacement
On a 1960s CBS ranch, full frame replacement is rarely optional once the original aluminum sash comes out. The concrete block rough openings were often built with no waterproofing course, and forty years of Palm Springs humidity has usually done damage you can’t see until the stucco is opened. We tear out the old frame, inspect the rough opening, replace any rotted wood or corroded jamb, flash and seal the opening properly, and set a custom-sized unit that meets current Palm Beach County wind-load code. This is the only way to make a jalousie-to-impact conversion that passes permit inspection the first time.
Insert Window Replacement
Insert replacement works when the existing frame is still square, level, and free of corrosion. In Palm Springs, that’s most common on homes where windows were replaced once in the 1980s or 1990s and the frames haven’t been eaten by salt air. We measure the existing frame interior precisely, order an insert unit sized to that exact dimension, and set it without disturbing the surrounding stucco or interior trim. It’s less invasive and typically runs $750-$1,200 per opening installed. But we’ll tell you honestly if an insert won’t work on your house. If the frame is out of true or water-damaged, an insert just hides the problem.
Storm Window Replacement
Some Palm Springs homeowners want added storm protection but aren’t ready for full impact conversion. We install storm-rated exterior glazing over existing windows, which buys time on your insurance review and cuts wind-driven water intrusion. In the village, this is common on the back elevations of homes on Greenbrier Drive or near the public golf course, where exposure is moderate and the original jalousie units haven’t yet failed outright. Expect $400-$700 per opening for quality storm-rated units installed to code.
Energy-Efficient Upgrade
The original single-pane sliders on a 1965 west-facing elevation lose cooling so fast that your AC never really cycles off. We replace those with low-E, argon-filled insulated units that drop the solar heat gain and stop the air leakage. In Palm Springs, where summer humidity sits heavy and salt air accelerates frame corrosion, energy-efficient replacement pays back fastest on south and west elevations. A typical energy-efficient insert for a 36-by-48 opening runs $600-$950 installed, before any available utility rebates. Full frame energy upgrades with impact glass run higher: $950-$1,600 per opening.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
TruePane is an authorized installer for more than a dozen manufacturer lines, and we carry the ones Palm Springs homeowners ask for most: among them. We stock common parts for local jobs, which cuts lead time when a latch fails or a sash needs rebalancing. We don’t push one brand on every house. We quote manufacturer lines side by side on paper so you see exactly what you’re buying, what each warranty covers, and how long the glass and frame are rated for. You choose. We register both warranty layers in writing before the truck leaves the driveway.
Common Window Replacement Problems We See in Palm Springs Homes
- Jalousie slats that fail wind-load ratings: Those louvered glass slats were never built for 130 mph winds, and Citizens Insurance knows it. We see non-renewal notices every week on 1955-1975 CBS ranches where the jalousies are still functioning. Full jalousie-to-impact conversion is the fix.
- Fixed block-course rough openings that refuse stock sizes: The original block masons set window openings in fixed courses, not modern standard dimensions. Order a stock double-hung without field-measuring every jamb and you get gaps that leak and fail inspection. We custom-size every unit for Palm Springs homes, which is the only honest way to work on this housing stock.
- Salt-laden humidity corroding fusion-welded frames: Twelve to fifteen miles off the Atlantic is close enough that salt air eats aluminum. On south and west elevations, we regularly see seal failure and fog between panes within a decade of installation. That’s why we specify marine-grade finishes and stainless hardware where exposure is worst.
- Hidden framing rot behind the stucco: On more than one Palm Springs ranch, we’ve opened a wall to replace a jalousie and found the king stud and sill plate soft enough to push a screwdriver through. Undersized lintels from the 1960s and no flashing course means water sat there for forty years. That’s a permit-triggered discovery, and it’s exactly why our quotes include a written allowance for hidden damage, priced and approved in writing before we touch it.
Pricing for Window Replacement in Palm Springs, FL
In Palm Springs, a full frame impact window replacement on a 1960s CBS ranch typically runs $850-$1,600 per opening installed. Insert replacements run $600-$1,200. Storm-rated exterior glazing runs $400-$700 per opening. What moves the number is what we find behind the stucco: undersized lintels, rotted jambs, missing flashing, outdated wiring that the permit inspector won’t allow to remain. We price those discoveries as written allowances, not open-ended change orders. You approve every dollar in writing before we do the work. Call (561) 940-2917 and we’ll send a technician to measure and price your windows for free. We never charge for an estimate, and we never throw a number at you without walking the house first.
We Also Serve Cities Near Palm Springs
Our Window Replacement in Palm Springs crews work the surrounding village cluster as well. We serve Delray Beach, Gulf Stream, Golf, and Ocean Ridge, carrying the same custom-measurement practices and impact-rated product lines we bring to Palm Springs.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Palm Springs
Yes, in most cases. Citizens Insurance non-renewal notices on Palm Springs CBS ranches almost always cite the original jalousie or single-pane aluminum windows as the reason. Once we complete a permitted jalousie-to-impact conversion and the inspector signs off, we provide the documentation your carrier needs to rescind the non-renewal. We’ve seen homeowners on Davis Road get their policy reinstated within weeks. The key is that the work must meet Palm Beach County wind-load code and be physically inspected. A handshake install won’t help you. Call (561) 940-2917 and we’ll walk you through exactly what your insurer is asking for.
Because the original block masons laid window rough openings to fixed block courses, not to modern stock dimensions. A 1963 ranch on 10th Avenue might have openings that are 35-1/2 inches wide where the nearest stock unit is 36 inches. Force a stock window into that opening and you get compression, racked frames, failed seals, and an inspector who won’t pass it. We field-measure every jamb on every opening before ordering anything. It adds a few days to lead time and a few dollars to cost, and it’s the only way to get a true install on this housing stock.
Three things, usually. Original 1950s or 1960s wiring still hot and run through the rough opening, which the inspector will require us to have relocated by a licensed electrician before we can close the wall. Rotted or corroded framing at the sill and jamb, especially on west and south elevations where salt-laden humidity has been working for forty or fifty years. And missing flashing or waterproofing, which was common practice in 1960s CBS construction and is now a code violation. We write an allowance for these discoveries into every full frame contract, and we get your written approval on any change order before we do the work. Nothing about a permit-triggered inspection should come as a surprise.
On a Palm Springs CBS ranch, usually not. The original slider frames on west-facing elevations have typically absorbed enough salt-laden humidity that the frame itself is degraded. You can replace the glass, but if the frame is out of true or corroded at the weep holes, you’ve paid for new glass in an old frame that will fail soon. The honest fix is full frame replacement with a low-E, argon-filled insulated unit in a marine-grade finish. It costs more up front, but it’s the last window you’ll buy for that opening for decades. We’ll quote both options side by side so you can see the numbers. Call (561) 940-2917 for a free estimate.
Five to seven working days from the day we start removing the first sash, including permit inspection. That’s for a typical 8-12 opening ranch where we’re replacing jalousies with custom-sized impact units. The variables are lead time on custom glass (usually 2-3 weeks from order to delivery in Palm Springs) and what we find when the stucco comes open. Hidden framing repair or electrical relocation can add a day or two, but we price those as written allowances and get your approval before any additional work begins. Most Palm Springs homeowners are fully done, inspected, and documented for insurance within three to four weeks of signing the contract.
What Makes TruePane Different in Palm Springs
On Davis Road, we pulled the original jalousie sash from a 1963 CBS ranch and found the concrete block rough opening had never been flashed. Forty years of salt-laden humidity had eaten the sill track and softened the jamb on the west elevation. We wrote a change order for new treated lumber, installed a Simonton double-hung impact unit with argon-filled low-E glass, and wrapped the rough opening in flashing tape before the inspector signed off. The homeowners finally got their Citizens non-renewal notice reversed. That’s the work. We do it the same way on every house, whether it’s a 900-square-foot ranch off Greenbrier Drive or a larger home near the public golf course. Dale Kessler’s founding rule never changed: if the pane is not true, the job is not done.
TruePane is not the cheapest bid in Palm Springs, and we don’t pretend to be. We’re the company that answers the phone at 3 a.m. when a jalousie slat lets go in a storm, measures every opening twice, quotes manufacturer lines side by side on paper, and registers both warranty layers in writing before the truck leaves the driveway. We hire local, we train apprentices into journeymen, and we sponsor county fairs and church roof funds because we plan to be in this village in thirty years. If you’re done chasing the low bid and you want the work done right the first time, call (561) 940-2917. We’ll schedule your free estimate and show you exactly what’s in your walls and what it will cost to make them code-compliant, energy-efficient, and insurable.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Springs and surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.