Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Ocean Ridge
Window replacement in Ocean Ridge starts with a simple fact: every home in this town sits on a narrow barrier island between the Atlantic and the Intracoastal, so the salt air hits from both sides and the wind-load codes are as strict as they get in Palm Beach County. That changes how a window gets specified, ordered, and set. We’ve worked enough Ocean Ridge homes to know what the building department will flag before they flag it. Call (561) 940-2917 and we’ll walk your house with you, measure every opening twice, and put the numbers on paper.
What you’ll notice first aboutOcean Ridgewindow work is that there’s no “inland” section of town. You’re never more than a few hundred yards from salt water. We spec marine-grade stainless hardware and impact-rated glazing on every job here because the alternative fails in under five years. We’ve pulled too many pitted, seized aluminum frames out of this town to pretend otherwise.
Why TruePane Windows & Doors Is Ocean Ridge’s Preferred Window Replacement Company
TruePane Windows & Doors was founded in 2008 by second-generation glazier Dale Kessler. The company carries a 42-year heritage of glass and frame craft, and the rule on the whiteboard hasn’t changed: if the pane is not true, the job is not done. Ocean Ridge homeowners call us because the job here is never a simple swap. The housing stock is mid-century to 1980s concrete block stucco, and those original aluminum single-panes and jalousie windows are done. The salt has been working on them for decades.
We’re the company inspectors in Ocean Ridge are used to seeing on permit pull sheets. That matters. When a 1972 CBS original opening is out-of-square by half an inch, the inspector checks whether the rough opening was refaced or just foamed and caulked into submission. Our crews reface as standard practice. OurWindow Replacementteam works in Ocean Ridge regularly, which means we know the lead times on custom impact units and the exact set of questions the local building department asks on a jalousie conversion. Background-checked, uniformed technicians do the work. A live person answers the phone 24/7, not a voicemail tree. And the Done Right Promise means what it says: if it isn’t right, we make it right, no paperwork fight.
Our Window Replacement Services in Ocean Ridge
Full Frame Replacement
Most Ocean Ridge homes eventually need full frame replacement rather than inserts. The reason is practical: 1960s and 1970s CBS construction was never built for modern impact-rated units. The original rough openings are frequently out-of-square, the jamb wood or aluminum is corroded, and the waterproofing behind the stucco was often minimal. A full frame replacement lets us reface the opening, correct the square, install new flashing tape on all four sides, and set the new frame with a proper sill pan. In Ocean Ridge, this is the repair that actually holds up to Exposure Category D wind loads.
Insert Window Replacement
Inserts make sense when the existing frame is sound and square. We measure the opening, check the frame for hidden corrosion with a moisture meter, and only recommend an insert when the structure justifies it. In Ocean Ridge, that’s less common than inland. The salt air off the Intracoastal corrodes the original frames from the outside while the Atlantic air works from the other side. We’ll tell you straight when an insert is not the right call and put the reasons in writing. If the frame is good, an insert keeps the stucco untouched and installs in a single visit.
Impact-Rated Window Replacement
Every replacement window in Ocean Ridge needs to be impact-rated. That’s not an upsell. Palm Beach County code requires it for the coastal Exposure Category D zone, and the Ocean Ridge building department checks. We install impact-rated lines from Andersen, Pella, Marvin, Milgard, PGT, and CGI, quoted side by side on paper so you see exactly what you’re buying. Our techs measure every opening twice and register both manufacturer warranty layers before the truck leaves the driveway. That’s The Keystone Standard, and it’s not optional on our jobs.
Energy-Efficient Upgrade
Salt air isn’t the only environmental factor in Ocean Ridge. The Atlantic sun bakes west-facing rear windows and sliding glass doors for most of the afternoon, and air conditioning runs heavy from April through October. A low-E, argon-filled impact-rated unit cuts the solar heat gain substantially compared to the single-pane aluminum those older CBS homes still carry. We quote energy numbers when you ask, and we’re straightforward about what’s a real utility-bill difference versus what’s marginal. The homeowners who stay in Ocean Ridge for twenty more years are the ones who upgrade the glass package now.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ocean Ridge
We’re an authorized installer for more than a dozen manufacturer lines, including. What that means for Ocean Ridge is simple: when a custom impact-rated casement or a large fixed ocean-view pane gets ordered, the manufacturer honors the warranty because the install was done by an authorized dealer who followed their spec. We keep the paperwork. Both warranty layers get registered in writing, durations stated, before we leave the driveway. And if a warranty claim ever comes up, the manufacturer talks to us, not to a call center three states away.
Common Window Replacement Problems We See in Ocean Ridge Homes
- Corroded or out-of-square rough openings. We open up 1960s and 1970s CBS walls constantly, and the original jamb conditions are rarely square. Reusing a corroded rough opening without refacing is the number one cause of failed inspections and seal failures within months on this barrier island.
- Seized aluminum hardware from dual-direction salt air. Because Ocean Ridge sits between the Atlantic and the Intracoastal, standard hardware that would last 10 to 15 years in Boynton Beach can pit and lock up in under five. Marine-grade stainless is the baseline here, not a spec upgrade.
- Failed waterproofing behind original stucco. Many of these older CBS homes were built with minimal flashing and no sill pan. When we replace windows, we address the waterproofing at the same time. Skipping it triggers a failed inspection and a permit hold.
- Jalousie windows that can’t accept a straightforward insert. Original jalousie units were never designed for impact-rated replacement. Full frame work is almost always required, and the custom sizing means big-box stock units won’t fit in most of this town’s openings.
Pricing for Window Replacement in Ocean Ridge, FL
Let’s put real numbers on it. A standard insert replacement in Ocean Ridge typically runs $850 to $1,500 per opening for a quality vinyl impact-rated unit. Full frame replacement with a refaced rough opening, new flashing, and a low-E argon-filled impact window usually runs $1,800 to $3,800 per opening depending on size, brand, and frame material. Jalousie conversions with custom sizing routinely land in the $2,500 to $4,500 per opening range. Energy-efficient upgrades with low-E and argon add about 15 to 25 percent to the unit cost. We give upfront pricing with no surprise line items on the bill. A live person answers the phone at (561) 940-2917 and will schedule a free estimate at your house in Ocean Ridge, not at a call center. We’ll walk the openings, measure everything twice, and write the numbers on paper before you commit to anything.
What you also need to know before any contractor opens a wall in Ocean Ridge: the local building department is small, staffed by people who know the housing stock, and they will flag a reused corroded opening. That’s the single biggest reason a window quote moves after the walls come open. We handle it differently. We inspect first, write an allowance into the contract for opening conditions we can’t see behind the stucco, and anything we find gets priced and approved in writing before we touch it. No change orders that surprise you. No permit hold that stalls your job for weeks. Just a square deal, in writing.
We Also Serve Cities Near Ocean Ridge
TruePane’s crews serve Ocean Ridge and the surrounding coastal communities. The same impact-rated, marine-grade specs we use in Ocean Ridge are standard for our work in Delray Beach, Gulf Stream, Golf, and Manalapan. Same live-person phone coverage, same Done Right Promise, same second-generation glazier’s craft. If you’re a neighbor and your windows are original to the house, call and we’ll take a look.
Serving Ocean Ridge, FL - Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Ocean Ridge
Because Ocean Ridge occupies the full width of a narrow barrier island, salt-laden air reaches every property from both the Atlantic side and the Intracoastal side. Standard aluminum hardware that would last over a decade a few miles inland can pit and seize in under five years here. Marine-grade stainless hardware keeps the window operating and keeps the warranty intact. Call (561) 940-2917 and we’ll show you the difference on a sample before you decide.
The answer depends on the condition of your existing frames, but Ocean Ridge’s inspectors routinely flag reused corroded or out-of-square rough openings in 1960s and 1970s CBS homes. If the frame is square and sound, inserts can work. If there’s hidden corrosion or the opening has shifted, full-frame replacement with refacing is what passes inspection. We inspect first and tell you which path applies to your house, in writing, with a free estimate. Call (561) 940-2917 to schedule it.
Jalousie windows require full frame replacement, not inserts. The original opening gets refaced, squared, and re-flashed, then we order custom impact-rated units sized to the opening. Most jalousie openings in Ocean Ridge are non-standard, so plan on a longer lead time for custom ordering. We handle the permit, the ordering, and the inspection, and we price the allowance for opening conditions in the contract. Call (561) 940-2917 for an exact quote.
Most likely, the contractor found a corroded rough opening, failed waterproofing, or undersized framing and didn’t have an allowance written into the contract. On this barrier island, those conditions are common. We handle it differently: we inspect before quoting, write a specific allowance into the contract for what might be hidden behind the stucco, and any surprise gets priced and approved in writing before we touch it. That’s the square deal. Call (561) 940-2917 and we’ll walk your house with you before any number goes on paper.
Exposure Category D is the Florida Building Code’s designation for coastal areas with high wind loads, and all of Ocean Ridge falls under it. That means the window frames, glazing, and installation method must meet stricter wind-load ratings than homes even a mile or two inland. We install impact-rated units built for Category D and set them with flashing and anchoring that pass Ocean Ridge inspections. Call (561) 940-2917 with your window questions, and schedule a free estimate while you’re on the phone.
If you live in Ocean Ridge and your windows are the ones the house was built with, they’re past due. We’d rather walk the house and give you an honest answer than leave you with a fogged seal and a door that binds in July. Call (561) 940-2917 today to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Ocean Ridge and the surrounding coastal communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.