Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Ocean Ridge
Window installation in Ocean Ridge runs on a different rulebook than it does a few miles inland. Every home in town sits on the same narrow barrier island between the Atlantic and the Intracoastal, and that means salt air hits your windows from two directions at once, all day, every day. TruePane Windows & Doors specs every Ocean Ridge job with marine-grade stainless hardware and impact-rated glazing as the starting point, not an add-on. Call (561) 940-2917 for a free estimate, and we’ll measure twice and quote you in writing before anything gets ordered.
Why TruePane Windows & Doors Is Ocean Ridge’s Preferred Window Installation Company
We’ve done enough work along Old Ocean Boulevard and down toward the Boynton Inlet to know what this town’s windows are up against. Ocean Ridge has its own building department and its own inspectors, and they know the local housing stock better than any contractor from outside the area ever will. That local scrutiny works in your favor when you hire the right crew. Our Window Installation team has pulled permits and passed inspections on enough 1960s and 1970s CBS homes in Ocean Ridge to know exactly what gets flagged before we ever order a unit.
Our technicians are background-checked, uniformed, and trained by second-generation glazier Dale Kessler to treat your home the way they’d treat their own mother’s. We register both manufacturer warranty layers in writing before the truck leaves your driveway, and we back every job with the Done Right Promise. If the pane is not true, the job is not done. That’s the founding rule, and it governs every install we do in Window Installation in Ocean Ridge.
Homeowners in Ocean Ridge tend to call rather than click. They want a live person on the phone, a written quote with real numbers, and a crew that shows up when they say they will. That’s what we do.
Our Window Installation Services in Ocean Ridge
We install, replace, and service the full range of residential windows, with particular emphasis on the styles that hold up to this town’s coastal conditions. Here are the four we handle most often in Ocean Ridge.
Casement Windows
Casement windows are the workhorse of coastal Florida, and in Ocean Ridge we recommend them more than any other operable style. They seal tight against wind-driven rain because the sash presses into the frame when closed. For homes on Spanish River Drive or anywhere with direct Intracoastal exposure, we specify marine-grade 316 stainless hinges and operators. Standard stainless hardware pits and seizes in under five years here. Double that exposure if you’re on the ocean side.
Awning Windows
Awning windows hinge at the top and open outward, which makes them a smart choice for Ocean Ridge homes that want ventilation even during afternoon showers. We’ve installed plenty of them in kitchens and bathrooms in the town’s 1970s CBS homes, where original jalousie windows were the standard. Those old jalousies leak conditioned air and do nothing for impact protection. A modern impact-rated awning window, set into a properly refaced opening, solves both problems.
Fixed & Picture Windows
When your view is the Atlantic, the last thing you want is a thick mullion grid cutting through it. Fixed and picture windows give you a clean sightline and, because they don’t open, they’re the strongest impact-rated units you can install. In Ocean Ridge, we size these windows around the view first and the wall structure second, though on older concrete block homes the rough opening often dictates both. Custom-ordered units are common here. We’ll tell you what that lead time looks like before you commit.
Single & Double Hung
Single and double hung windows remain a popular choice for Ocean Ridge’s mid-century homes because they match the original architecture. The catch is that older homes in this town rarely have standard rough openings. We measure every opening twice and quote manufacturer lines side by side on paper. When an opening is out of square, we reface it before we set the frame. Skipping that step is how you get a fogged seal and a window that binds in July.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ocean Ridge
TruePane is an authorized installer for more than a dozen manufacturer lines, including. We quote these side by side on paper so you see exactly what you’re buying and what it costs before you sign anything. For Ocean Ridge homeowners, we lean on Marvin and Andersen impact-rated lines most often, because their coastal specs and marine-grade hardware options match what this barrier island demands. Custom-ordered units are common here, and we will not order anything until the price is fixed in writing.
Common Window Installation Problems We See in Ocean Ridge Homes
- Standard stainless hardware that fails early. Hardware specified for inland use, even 304 stainless, pits and seizes within five years under dual salt-air exposure. We specify marine-grade 316 stainless on every Ocean Ridge install, Intracoastal-side or ocean-side.
- Impact sashes set into corroded original aluminum frames. Some contractors try to reuse the existing frame and just swap in impact sashes. It fails at the jamb, and it violates Palm Beach County’s Exposure Category D wind-load requirements. Full frame replacement is the honest fix.
- Big-box stock sizes forced into non-standard rough openings. 1960s and 1970s CBS homes in this town have rough openings that are frequently out of square by half an inch or more. Stock sizes won’t flash correctly, and Ocean Ridge’s inspectors catch it every time.
- Improper flashing on seaward-facing elevations. With Atlantic wind-driven rain on one side and Intracoastal humidity on the other, a poorly flashed window leaks inside a year. We wrap jambs with flashing tape and reface openings to a clean, square surface before setting any frame.
Pricing for Window Installation in Ocean Ridge, FL
Window pricing in Ocean Ridge runs higher than inland Palm Beach County because of what the town demands: marine-grade hardware, impact-rated glazing, and custom openings on a large share of the aging housing stock. Here are honest ranges for this market. A standard impact-rated casement window in Ocean Ridge runs $1,250-$2,800 per unit installed, depending on size and glass package. A large fixed or picture window with impact glazing runs $1,800-$4,200. Awning windows typically land between $900 and $2,100 per unit. Full-home retrofits on 2,000-3,000 square foot CBS homes most often run $38,000-$72,000. Custom-ordered units for non-standard openings add lead time, not necessarily a big upcharge. We fix the price in writing before we place any order. Call (561) 940-2917 for a free, line-item estimate.
| Window Type | Typical Installed Cost in Ocean Ridge |
|---|---|
| Impact casement window | $1,250-$2,800 per unit |
| Fixed / picture (impact-rated) | $1,800-$4,200 per unit |
| Awning window | $900-$2,100 per unit |
| Single / double hung (impact-rated) | $1,100-$2,600 per unit |
| Full-home retrofit (2,000-3,000 sq ft) | $38,000-$72,000 |
We Also Serve Cities Near Ocean Ridge
Our crews serve Ocean Ridge locally and also work in Delray Beach, Gulf Stream, Golf, and Manalapan. The coastal exposure varies block by block in those towns, but the same marine-grade standard applies anywhere the salt air reaches.
Serving Ocean Ridge, FL - Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Ocean Ridge
Marine-grade 316 stainless hardware is required in Ocean Ridge because the town sits on a narrow barrier island flanked by the Atlantic on one side and the Intracoastal on the other, so salt-laden air reaches every property from two directions simultaneously. Standard stainless hardware pits and seizes within five years under that exposure. If you’re on the Intracoastal side, call (561) 940-2917 and we’ll explain exactly what spec your windows need.
If an impact window is installed into an out-of-square rough opening, the frame sits under stress, the sashes bind, the seal at the jamb fails, and water intrusion follows within a season or two. Ocean Ridge building inspectors routinely flag this on 1960s and 1970s CBS homes. The fix is refacing the opening to clean, square, structural surface before setting the frame. That’s standard practice on our installs. Call (561) 940-2917 for a free estimate.
Custom-ordered impact windows are required for a large share of Ocean Ridge homes because the town’s original single-family stock, mostly 1960s through 1980s concrete block homes, has rough openings that rarely match modern stock sizes. Trying to force stock units into those openings results in poor flashing and failed inspections. We measure twice, tell you honestly if custom ordering is necessary, and fix the price before the order goes in. Call (561) 940-2917 with your address and we’ll talk it through.
Salt air attacks the perimeter seals and hardware of insulated glass units far faster in Ocean Ridge than even a few miles inland, with aluminum frame channels and standard stainless hardware degrading in under five years. Once the seal fails, the unit fogs permanently and the insulating gas escapes. The prevention is marine-grade hardware, a properly flashed and refaced rough opening, and impact-rated glazing specified for Exposure Category D wind loads from day one.
Window installations in Ocean Ridge must meet Palm Beach County’s coastal Exposure Category D wind-load requirements under the Florida Building Code, which applies to the entire barrier island, not just ocean-facing elevations. Many older homes still have original single-pane aluminum or jalousie windows that don’t come close to code. Permitting and inspection are part of every TruePane job, and we don’t consider the work done until the inspector signs off.
Our crew recently retrofitted a 1970s concrete block stucco home on Spanish River Drive, replacing original single-pane aluminum windows with custom-ordered Marvin impact-rated casements. The existing rough openings were out of square by nearly 3/4 inch, requiring refacing before we set the new fusion-welded frames and wrapped the jambs with flashing tape. With marine-grade stainless hardware and high-SHGC low-E glass specified to offset the home’s north-facing light, the schedule was driven entirely by the 14-week factory lead time. That’s how most Ocean Ridge projects go. Lead times, not labor, set the calendar on this tier of work.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Ocean Ridge and South Florida’s coastal communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.