Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Boynton Beach
Door installation in Boynton Beach typically runs $450-$1,800 for a standard impact-rated entry door, depending on whether we’re working with an original 1960s CBS rough opening or a newer western subdivision frame. Most single-door replacements in the Leisureville and Quantum Lake areas are done in one day, though HOA-coordinated bulk projects take longer because inspections get staged across multiple units. If you’re east of Federal Highway dealing with a corroded aluminum door that won’t close square anymore, call us at (561) 940-2917 and we’ll measure the opening properly before you spend a dollar.
Why TruePane Windows & Doors Is Boynton Beach’s Preferred Door Installation Company
We’re a second-generation glazier’s operation led by Dale Kessler, and we’ve spent years learning how Florida’s salt air, humidity, and building codes punish doors that weren’t set right the first time. That matters in Boynton Beach, where a door installed even slightly out of true in a 1960s concrete block wall will bind by the following summer. Our Door Installation team has worked in Leisureville, Chapel Hill, Hunters Run, and the communities along Hypoluxo Road long enough to know which HOA boards require architectural review before the first screw comes out.
We don’t franchise our work out. The technicians who show up at your house in Boynton Beach are background-checked, uniformed, and trained by us. We measure each opening twice. We register both manufacturer warranty layers in writing, with durations stated, before the truck leaves your driveway. That’s The Keystone Standard, and it’s the same on a $450 storm door in Rolling Green as it is on a full custom entry system in a lakefront estate off Woolbright Road.
The Done Right Promise backs every job. If something isn’t right, we make it right. No paperwork fight, no fine print. Dale’s rule has been on the whiteboard since day one: if the pane is not true, the job is not done.
Our Door Installation Services in Boynton Beach
Entry & Swing Doors
Most of the entry doors we replace in Boynton Beach are original swing doors on single-story CBS homes built between 1965 and 1985. A properly set impact-rated entry door for this market runs $900-$1,800, including new hinges, sweep, threshold, and weather-stripping. We see a lot of doors in communities like Boynton Lakes and Casa Del Rey where the hinge jamb has shifted over decades and the deadbolt no longer lines up. We can often correct that during replacement without reframing the entire opening.
Storm Doors
Storm doors are undersung workhorses in Boynton Beach, especially for seasonal residents who want both ventilation and a second layer of protection during storm season. A good storm door installation runs $350-$650 depending on whether the existing frame is sound or needs new brickmold. In neighborhoods along the Intracoastal, we recommend powder-coated aluminum frames with stainless hardware because the salt-laden air east of Federal Highway will eat through cheaper materials within five years.
Arched & Custom Doors
Boynton Beach has a surprising number of arched entryways on 1970s and 1980s custom homes, particularly in communities like Hunters Run and the Cedar Ridge estates. Arched and radius-top doors are always special-order. Depending on the manufacturer and radius, expect $2,200-$5,000 fully installed, and six to eight weeks for fabrication. We’ll template the opening on site, not from a drawing, because a sixteenth of an inch matters when you’re fitting a manufactured radius into a 45-year-old poured concrete opening.
Bifold & Folding Doors
Folding door systems have become common in Boynton Beach renovations where homeowners open a living room onto a patio or pool deck. A three-panel bifold system for a standard 72-inch opening runs $1,500-$3,000; larger multi-slide folding systems start around $4,500. Boynton Beach sits in Palm Beach County’s wind-borne debris region, so any folding door that opens more than 50% of the wall area generally needs Florida Product Approval impact ratings and a permit. We’ll tell you honestly if the door you’re eyeing meets code before you order it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Boynton Beach
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. For Boynton Beach’s retirement communities, we frequently specify ViewLux impact-rated fiberglass entries because they hold up to salt air better than aluminum and carry the Florida Product Approval numbers Palm Beach County inspectors expect. We also work with ES Windows and CWS for custom and high-end openings. Because we’re local to South Florida rather than drop-shipping from a warehouse in another state, our lead times on replacement hardware and warranty parts for Boynton Beach customers are measured in days, not weeks. Scheduling and dispatch are coordinated from our South Florida office, and our crews serve Boynton Beach directly.
Common Door Installation Problems We See in Boynton Beach Homes
- Salt-air corrosion east of Federal Highway. Aluminum entry doors in neighborhoods like Chapel Hill and Saba Homes start pitting at the bottom hinge after seven to ten years. The white powder and flaking aluminum you see isn’t cosmetic, it’s structural. Left alone, the hinge screws lose purchase and the door sags until the deadbolt binds.
- Undersized rough openings in 1960s CBS construction. Original jalousie-era openings were framed for doors much narrower than modern building codes prefer. Swapping in a code-compliant 36-inch door often requires cutting into concrete block, adding a composite buck frame, and pulling a permit. We do this work in-house, not through a subcontracted framer.
- HOA door-style exclusions. Leisureville and similar 55+ communities maintain architectural review boards with approved door lists that exclude many standard impact-rated models. We can tell you which CGI, and PGT models are on your community’s approved list before you spend money on a door that won’t pass board review.
- Failed weather-sealing on west-facing door openings. Boynton Beach afternoon storms hit west-facing entries hard. Doors with original rubber sweeps and worn thresholds leak during heavy downpours. We see this constantly in the single-story communities along Gateway Boulevard and Jog Road. The fix is rarely a new door; usually it’s a new threshold, sweep, and properly shimmed jamb.
Pricing for Door Installation in Boynton Beach, FL
A basic storm door installation in Boynton Beach runs $350-$650. A standard impact-rated entry door replacement on a 1970s CBS home runs $900-$1,800, with the upper end reflecting doors that need reframing, new buck frames, or custom sizing for nonstandard openings. Arched and custom doors start around $2,200 and can exceed $5,000 for high-end fiberglass or clad-wood systems. Folding door systems run $1,500-$4,500 for residential openings. What moves the price in Boynton Beach specifically: your HOA’s approved door list, whether your original rough opening is 36 inches or narrower, whether you’re east of Federal Highway and need marine-grade hardware, and whether you’re replacing a swing door with another swing or converting to a different configuration. Call (561) 940-2917 and we’ll give you a written line-item quote after measuring on site. Estimates are free.
We Also Serve Cities Near Boynton Beach
Our crews work throughout southern Palm Beach County and the surrounding area. If you’re in Delray Beach, Greenacres, Boca Raton, or Deerfield Beach, we provide the same Boynton Beach level of service and the same written warranty registration, and we’ll be there when we say. You’ll get a live person on the phone, not a voicemail tree.
Serving Boynton Beach, FL - Our Local Coverage Area
We’re based in the Boynton Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Boynton Beach
Yes. Any impact-rated door replacement on a permitted structure in Boynton Beach requires a permit, because the door is part of your home’s wind-borne debris protection system. The city and Palm Beach County require a Florida Product Approval number on the unit, and the installation must pass a wind-load inspection. We pull the permit, schedule the inspection, and make sure the inspector’s sign-off happens before we call the job done. Call (561) 940-2917 and we’ll walk you through what your specific replacement needs.
Usually not. Original jalousie-era rough openings in 1960s CBS homes run 30 to 32 inches wide. A true zero-threshold accessible entry needs a 36-inch rough opening to pass code and work with a wheelchair or walker. If you have a 34-inch opening, we can sometimes install a 32-inch door with a low-profile threshold and meet most accessibility needs without cutting block. But if you need the full 36 inches, we’re reframing the opening, adding a composite buck, and pulling a permit. That work typically adds $600-$900 to the job. We’ll measure and tell you exactly which path your house can take before you commit.
Leisureville’s architectural review board maintains a list of approved door styles and colors, and most standard impact-rated entry doors are not on it. The models that typically pass review are fiberglass impact-rated units from PGT in specific colors, usually white or almond, with specific panel profiles. We can pull the current approved-door list from the community association before you order anything, so you don’t spend $1,500 on a door your HOA will reject at inspection. Call (561) 940-2917 to have us check your community’s current list.
By the time you see white powder and deep pitting at the hinge jamb, the aluminum is compromised and the door should be replaced. The corrosion has typically eaten far enough into the jamb that the hinge screws no longer hold, which is why the door sags and the deadbolt binds. In the communities east of Federal Highway, this is common because Intracoastal salt air accelerates aluminum corrosion. We replaced a corroded aluminum entry in Leisureville last year where the existing jamb was so far gone that we reframed it with a composite buck and installed a ViewLux impact-rated fiberglass door with marine-grade stainless hinges. The door will outlast the house. Call (561) 940-2917 for a free assessment.
Your insurance carrier needs documentation showing the door was manufactured to an impact standard, carries a valid Florida Product Approval number, and was installed by a licensed contractor who pulled a permit and passed the county inspection. Some insurers also want photographs of the installed unit and a copy of the permit sign-off. We provide all of that in a package for you after the inspection. Both manufacturer warranty layers get registered in writing, with durations stated, before the job closes. If your carrier is pushing for proof, call (561) 940-2917 and we’ll make sure you have what they’re asking for.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Boynton Beach.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.