Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Custom Windows & Doors for Delray Beach Homeowners
Custom Windows & Doors - Delray Beach are not an off-the-shelf purchase. They are measured, fabricated, and set to fit a specific opening in a specific house, often one that has settled over twenty or thirty years of salt air and hurricane seasons. TruePane Windows & Doors has done this work in Delray Beach since 2008 under the founding rule Dale Kessler keeps on the whiteboard: if the pane is not true, the job is not done. We are a second-generation glazing company, not a franchise, and every custom window or door we install carries the Done Right Promise, with both manufacturer warranty layers registered in writing before our truck leaves your driveway. Call (561) 940-2917 and a live person answers, 24 hours a day, seven days a week.
What Our Custom Windows & Doors Service Includes
Custom work is our trade, not a sideline. Here is what we actually do under this roof, broken down by the kind of opening you are dealing with.
Custom Shape Windows
Arches, circles, hexagons, rake windows that follow a roofline, eyebrow windows over a front door. Standard rectangular stock cannot fill these openings the way they were drawn. We measure every opening twice, order the custom shape from an authorized manufacturer line, and set it so the reveal is even all the way around. In Delray Beach, where many homes west of Federal Highway were built in the 1960s and 1970s with unusual window geometry, we have replaced custom shapes that other contractors refused to quote. We are why the frame does not leak and the glass does not bow.
Commercial Storefront Glazing
Storefront systems on Atlantic Avenue and along Linton Boulevard take a beating from sun, salt, and foot traffic. We install and replace commercial storefront glazing, from aluminum storefront framing to tempered glass panels that meet current Florida building code for impact and safety. The work includes proper setting blocks, weep systems, and perimeter sealant applied the way the manufacturer specifies, not the way that is fastest. A storefront that fogs or leaks after six months was never set true to begin with. Ours do not fog or leak.
Curtain Wall Systems
A curtain wall is a non-structural glass and aluminum facade that hangs off the building frame, common on commercial and multi-story properties in Delray Beach’s newer mixed-use developments. We install and service curtain wall systems with attention to thermal movement, wind load, and drainage, because a curtain wall that traps water behind the glass is a structural problem waiting to happen. Our techs are background-checked and uniformed, and when we work on a curtain wall, we register both warranty layers in writing before the truck leaves. That is the Keystone Standard, and it applies to every job no matter the size.
Architectural Grilles & SDLs
Simulated divided lites, or SDLs, give a window the look of true divided light without the thermal penalty of separate panes. We install architectural grilles and SDLs in styles that match the original character of Delray Beach’s historic districts, from the Marina Historic District to the neighborhoods around Old School Square. The grilles are applied to the interior and exterior surfaces in the pattern you specify, and we make sure the alignment is exact, because a grille bar that sits even an eighth-inch off runs the whole window out of true. This is the kind of detail that separates custom work from a stock unit with a snap-in grid.
Oversized Glass Panels
Floor-to-ceiling fixed glass, wide sliding door panels, picture windows that run eight or ten feet across. Oversized glass is heavy, and it moves with the building. We know the lift weights, the tempering requirements, and the structural load a given opening can carry, and we will tell you plainly when a panel needs a stronger frame or a thicker lite. In Delray Beach, where the Florida Building Code has specific wind-load requirements, we order oversized panels that meet or exceed those standards and we set them with setting blocks and silicone joints that allow the glass to do what glass does in the heat. It expands. It moves. A bad installer ignores that. We do not.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Custom Windows & Doors
TruePane Windows & Doors is an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. When you sit down with us, we quote manufacturer lines side by side on paper so you can see exactly what you are buying and what each line costs.
We have done extensive custom work with ES Windows, whose operable glass walls and slim stile profiles show up in a lot of Delray Beach’s higher-end remodels, and with CWS, a line we turn to for custom shapes and oversized fixed glass. We also service and install ViewLux products for homeowners who want clean sightlines at a workable price. Whether you have one of these lines or any other make, we can measure, order, and install it correctly, and we will put both warranty layers in writing before the truck leaves the driveway.
Signs You Need Custom Windows & Doors Right Now
- Fog between the glass panes. A failed seal means the insulated glass unit has lost its argon or krypton fill and is now trapping moisture. You cannot wipe it off, and the window is no longer doing its thermal job. In Delray Beach’s humidity, this shows up as a milky film across the lite by mid-morning.
- A door that binds in the summer. Heat and humidity make wood and some composites swell. If your door only sticks between June and October, the slab and frame were not given proper clearance when they were installed. That is an installation problem, not a door problem, and it will not fix itself.
- Cracked or chipped lites anywhere in the house. Delray Beach sun and storm debris can turn a small chip into a running crack in a single season. Replacing the pane now costs less than replacing the whole sash later, and the $50-Off-Any-Repair-Over-$250 offer applies if you call (561) 940-2917.
- You can see daylight around your windows or doors. If the framing has settled or the original builder used a stock unit in a rough opening that was never square, gaps show up along the sill or the side jamb. Those gaps cost you air conditioning every summer afternoon and give rain an open invitation in hurricane season.
- Water stains on the wall below a window or along a door threshold. That stain means water is getting in somewhere and traveling. In Delray Beach, it does not take long for that to turn into rot in the framing or mold behind the drywall. A custom opening that was set true and sealed properly does not leak, so the stain is the first hard signal that yours was not.
Our Custom Windows & Doors Process - Step by Step
- 1
We walk the house with you and measure twice. Every opening gets measured top, middle, and bottom, because no opening in a thirty-year-old Delray Beach house is perfectly square. Dale Kessler started this company in 2008 on the principle that out-of-true installs and voided warranties were problems worth fixing permanently, and that starts with not trusting a single measurement.
- 2
We quote manufacturer lines side by side on paper. You see the unit cost, the fabrication lead time, and the installation labor, separated line by line. No lump-sum guesswork. No surprise line items on the bill later. That is what we mean by a square deal.
- 3
We order the custom glass and hardware from an authorized line. We are an authorized installer for more than a dozen manufacturers, so when we order, we order exact. The lead time is stated on the quote, and we will be there when we say.
- 4
We install to the Florida Building Code, and we register warranties before we leave. Every job gets both manufacturer warranty layers registered in writing, durations stated, and the workmanship is covered by the Done Right Promise. If it is not done right, we make it right. No paperwork fights, no arguing.
- 5
We walk the finished work with you. You check the reveals, the sealant lines, the hardware operation, and the grille alignment. If something is not true, we fix it before we leave, not weeks later when you finally notice it from across the room.
How Much Does Custom Windows & Doors Cost in Delray Beach?
A custom window or door in Delray Beach costs more than a stock unit because it is fabricated to your opening, not pulled from a warehouse shelf. Here are the working ranges we have seen across the Delray Beach market:
A custom shape window, like an arch or a circle, typically runs $900 to $2,800 per window depending on size, glass package, and whether it needs impact-rated lites. An oversized fixed glass panel runs $2,500 to $7,000 or more when you get into tempered, impact-rated glass with a heavy frame. Architectural grilles and SDLs add $150 to $600 per sash depending on the pattern and width of the bars. A commercial storefront glass replacement runs $800 to $3,000 per lite depending on size and code requirements. What moves the price: the opening size, the glass package, the frame material, whether the opening needs structural reinforcement, and whether the old frame can be reused. How to avoid overpaying: get the quote in writing with line items, insist on both warranty layers registered in writing, and do not accept a lump-sum number without asking what the unit costs versus the labor. A free estimate from TruePane includes all of that, on paper, side by side, with no obligation. Call (561) 940-2917.
Custom Windows & Doors Near Delray Beach - Our Service Area
TruePane Windows & Doors serves Delray Beach and the surrounding coastal communities, from Custom Windows & Doors in Gulf Stream to the north to Custom Windows & Doors in Golf, and west into Boca Raton, Boynton Beach, Ocean Ridge, Manalapan, Lantana, Atlantis, South Palm Beach, Deerfield Beach, and Lake Worth Beach. If your home sits anywhere in this stretch of Palm Beach County, the crew that measures is the crew that installs, and we have been working these streets since 2008. You can always start at our home page for the full scope of what we do.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and also provide Custom Windows & Doors in Boynton Beach, and we know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Custom Windows & Doors in Delray Beach
A custom window or door is one fabricated to fit a specific opening rather than a standard-sized rough opening from a builder’s catalog. That can mean a special shape, an unusual size, or a specific material and hardware combination. In Delray Beach, custom work is common in older homes with non-standard framing and in newer construction where architects specify floor-to-ceiling glass or narrow stile aluminum lines, and we also offer our Custom Windows & Doors in Deerfield Beach. TruePane measures every opening twice and orders from authorized manufacturer lines, then registers both warranty layers in writing.
Most single openings are measured, ordered, and installed within two to four weeks, depending on the manufacturer’s fabrication lead time and whether the glass is impact-rated. The installation itself is usually completed in one visit, and most jobs do not require a second appointment. We will tell you the lead time on the written quote before you sign anything, and we hold to it. Call (561) 940-2917 for a timeline on your specific opening.
In Delray Beach, Boca Raton Custom Windows & Doors and similar custom glass and door work typically falls between $900 and $7,000 per opening depending on size, glass package, framing material, and impact requirements. A straightforward custom shape window runs toward the lower end, while oversized fixed glass and impact-rated assemblies run toward the upper end. Every TruePane quote is written with line items so you see exactly what you are paying for, and our estimates are free. Call (561) 940-2917 for an exact quote.
Yes. TruePane is an authorized installer for ES Windows and has completed extensive custom work with CWS, including oversized fixed glass and custom shapes. We handle service, replacement, and new installation for both lines, and we quote them side by side with other manufacturer lines you may be considering. If you have an existing ES Windows or CWS opening that is fogged, leaking, or out of square, we can evaluate it and give you a written repair or replacement range.
A live person answers our phone 24 hours a day, seven days a week, at (561) 940-2917. If a window or door is broken, you will speak to a person, not a voicemail tree, and we will tell you what we can do over the phone. We prioritize broken glass and security openings that leave a home exposed to weather or intruders. The Free Written Repair Estimates offer applies to eligible emergency repairs.
Every custom window and door carries two layers of warranty. We register both manufacturer warranty layers in writing before our truck leaves the driveway, with durations stated on the paperwork. On top of that, our Done Right Promise covers the workmanship for 90 days after installation. If something is not done right, we make it right. No paperwork, no arguing, no fine print that covers neither.
Clear the area around the opening so the crew has about three feet of working room, and move furniture or wall hangings away from the immediate wall. For interior work, we will lay drop cloths and we clean up when we are finished. You do not need to be home for the entire installation if you prefer, but we do a final walkthrough with you before we leave so you can verify the reveals, the hardware, and the sealant lines. Call (561) 940-2917 with any questions before your appointment.
Schedule Your Custom Windows & Doors Service in Delray Beach Today
If you have been living with a window that fogs, a door that sticks, or an opening that never looked right in the first place, call TruePane Windows & Doors at (561) 940-2917. We will measure, quote line by line on paper, and give you a no-obligation estimate with both warranty layers registered in writing when the work is done. Dale Kessler founded this company on one rule: if the pane is not true, the job is not done. Call today and talk to a live person, any hour, any day.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Delray Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.