Sliding Glass & Patio Doors

Sliding Glass & Patio Doors in Delray Beach, FL | TruePane Windows & Doors

Sliding glass and patio doors do more than connect a living room to a lanai. In Delray Beach, they’re a structural decision. Our impact-rated sliding door systems pair laminated glass with reinforced tracking so the same opening that frames your pool view also holds its line when a storm moves in off the Atlantic. TruePane Windows & Doors supplies and installs these doors across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, and we’ve been doing it in Delray Beach long enough to know which configurations actually pass permitting the first time. If you’re planning a replacement or a new opening, call (561) 940-2917 and we’ll walk you through what fits your wall and your wind zone.

Call (561) 940-2917

Product Overview - Sliding Glass & Patio Doors

A sliding glass door in a Florida home is not the same product you’d hang in a house up north. Here, the door panel has to stay in its frame when a 2×4 hits it at speed, and it has to keep doing that through the pressure cycles that follow. The impact series we install in Delray Beach is built as a large-span system: laminated glass panels riding on a reinforced track, engineered to the same wind-zone design pressure as our window lines. That continuity matters because a wall is only as strong as its largest opening.

Architecturally, these doors fit where Florida homes want them most: a 12-foot-wide opening across the back of a great room, a three-panel stack that disappears into a pocket, or a simple two-track slider off a guest bedroom. The frames come in aluminum or vinyl, depending on exposure and finish preference, and the glass package is selected for the specific elevation it faces. What makes the product work is restraint: we don’t oversell design pressure beyond what the configuration is tested for, and we don’t undersell the importance of a level, plumb, square install. In Delray Beach, the door is only as good as the day it was set.

Technical Specifications

Every opening is configured to its wall, which means the spec sheet matters less than the combination. Here’s what we work with when we quote a sliding glass or patio door in Delray Beach:

• Frame materials: Aluminum or vinyl, selected by exposure and aesthetic
• Maximum size: Up to 12 feet wide, depending on panel count and design pressure
• Track configurations: 2-track and 3-track systems
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass
• Finish colors: White, almond, bronze, black, and tan
• Screen options: Retractable screen or sliding screen
• Design pressure: Matched to your wind zone, up to +/-100, never higher than the configuration requires

We quote to the wall, not to a catalog. That means the track count, panel width, and glass package follow from your opening size and the elevation it faces, not from a default package.

Hurricane & Compliance Performance

Laminated Impact Glass
The glass is made of two panes bonded with a PVB (polyvinyl butyral) interlayer. Under impact, the glass may crack but the interlayer holds the pieces in the frame, keeping the building envelope sealed against wind and water. This is the core of what makes an impact door different from a standard slider.

Miami-Dade NOA / Florida Product Approval
Each configuration carries a Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval number, issued per product and size. We verify the specific listing against your quote before we order, because Delray Beach building officials will check it during permit review.

FBC / HVHZ Compliance
The door systems we install in Delray Beach are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. That means the product was designed for the stricter coastal criteria, not just the statewide baseline.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a specific protocol family. TAS 201 covers large-missile impact, TAS 202 is cyclic wind-pressure loading, and TAS 203 is forced-entry resistance. If a door carries a valid NOA, it has passed this battery.

Design Pressure Matched to Your Wind Zone
We don’t sell a higher design pressure than the opening needs. Design pressures are matched to your wind zone, up to +/-100, never higher. The correct rating is the one the engineer specifies for your elevation, and paying for more does nothing for you.

Low-E / Insulated Glass Options
For west-facing elevations in Delray Beach, Low-E insulated glass cuts heat gain meaningfully while keeping the impact rating intact. We’ll spec it where it pays for itself: afternoons on the pool side, master bedrooms, anywhere the afternoon sun hits the glass directly.

Color & Glass Options

Most Delray Beach homes lean one of two directions: Mediterranean revival with stucco walls and clay barrel tile, or modern coastal with flat roofs and clean lines. The finish you choose should follow the architecture. White and almond read traditional and disappear into light stucco. Bronze and black give you that crisp, high-contrast look that works on contemporary elevations and against white oak floors. Tan sits in the middle, warm but not yellow, and it hides salt haze better than darker finishes.

On the glass side, the default for an impact slider is laminated clear, and for shaded east-facing openings that’s often enough. Laminated tinted glass is the choice when you want glare control without losing the impact rating. Low-E insulated is what we recommend on afternoon sun, because it does the heavy lifting on heat while the laminated layer handles impact. The configurations aren’t interchangeable, so we’ll tell you which glass makes sense for the elevation you’re actually working with, not the one that sounds best in a brochure.

Installation by TruePane Windows & Doors in Delray Beach

An impact door is a rated assembly, not a door slab. The NOA that proves the product passes TAS testing only holds if the installation doesn’t break the system. That’s why we set every slider ourselves, and why our process in Delray Beach is consistent on every job.

It starts with a pre-installation inspection of the rough opening: stud condition, header, existing flashing, and whether the opening is square before we touch it. Then we set the frame level, plumb, and square, which on an older Delray Beach home sometimes means correcting a floor that’s drifted a quarter inch over 40 years. We seal the perimeter with AAMA 812 low-expansion foam, following AAMA 2400/2410 installation practice, and we do a water test before trim goes back on. If permitting is in play, and in an HVHZ jurisdiction it almost always is, we know what the plan reviewer wants to see. Coastal exposure changes the design pressure conversation, and we don’t guess at it.

Improper installation is the most common reason a compliant door fails. The panel’s too heavy for the installer’s usual crew, the threshold isn’t bedded right, the reveal’s uneven, and six months later the door binds. When you’re spending on an impact-rated opening in Delray Beach, the installation is not the place to save money.

Frequently Asked Questions - Sliding Glass & Patio Doors

What wind zone / design pressure is the Sliding Glass & Patio Doors rated for?
Design pressures are matched to your wind zone, up to +/-100, never higher. Your Delray Beach elevation and exposure determine the exact rating required, and we quote to that number. Call (561) 940-2917 and we’ll calculate it for your opening.

What is the lead time for a Sliding Glass & Patio Doors order?
Lead time depends on the manufacturer and configuration. Custom sizes and three-track configurations take longer than stock two-track sliders. We’ll give you a written timeline when we quote so you’re not planning around a guess.

Does the Sliding Glass & Patio Doors require a Miami-Dade NOA or Florida Product Approval submittal for my permit?
Yes, for any permitted replacement or new opening in Delray Beach, the building department will want the product’s NOA or Florida Product Approval number for the specific configuration. We pull those numbers per configuration and include them with your submittal. Call (561) 940-2917 if your permit set needs a specific listing.

Can I customize the size or configuration of the Sliding Glass & Patio Doors?
Yes, within the tested limits of the product line. Panel widths, track count, finish color, glass type, and screen configuration are all selected per opening. The ceiling is 12 feet wide, and the design pressure for your wind zone determines how far you can push a given panel size.

How do I maintain the frame and track?
Rinse the track monthly, especially on the salt side of Delray Beach. Sand and shell grit are the enemy of roller hardware. Keep the weep holes clear, and don’t grease the track, it collects grit. If the door starts to drag, call us before you force it, which you can do at (561) 940-2917. Forced operation is how rollers and handles fail early.

Get a Quote - Sliding Glass & Patio Doors in Delray Beach

If you’re replacing a slider or opening up a wall in Delray Beach, start with a measurement and a design pressure check, not with a catalog price. Call (561) 940-2917 to schedule a free on-site measurement and we’ll put together a written line-item quote on the configuration that actually fits your opening and your wind zone.

Written by the team at TruePane Windows & Doors, serving Delray Beach, FL and surrounding coastal communities.