Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterHorizontal Roller & Sliding Windows in Delray Beach, FL | TruePane Windows & Doors
Horizontal roller and sliding windows are a staple of Florida home design for good reason: they open wide for coastal breezes, they’re easy to operate, and when built with laminated impact glass, they hold the building envelope together during a hurricane. At TruePane Windows & Doors, we install impact-rated horizontal sliders across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass product lines, all engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Homeowners in Delray Beach choose this profile for bedrooms, living areas, and kitchens where a wide sightline and simple horizontal glide make daily living more comfortable. If you’re pricing impact windows for a Delray Beach home, call (561) 940-2917 and we’ll walk you through configurations, glass packages, and a free on-site measurement.
Product Overview - Horizontal Roller & Sliding Windows
Our workhorse impact profile: laminated impact glass tested to withstand 140-mph winds and 9,500 lbs of wind-borne debris impact, gliding horizontally on a reinforced track. That sentence defines what this window is, but here’s what it means in practice for a Delray Beach home. A horizontal slider uses one or more operable sashes that move side to side along a bottom track rather than cranking outward or lifting upward. For Florida’s long, low ranch homes and mid-century builds, that horizontal glide feels natural. For coastal high-rises and condominiums along A1A, it matches the wide, panoramic openings that architects specify.
This profile is built around a reinforced frame, available in aluminum or vinyl, with a heavy-duty track system that keeps sashes aligned under wind load. The laminated impact glass includes a PVB interlayer that holds broken glass in the frame if a projectile hits it. That’s the critical difference between a window that keeps its structural integrity in a storm and one that fails open. TruePane Windows & Doors installs these systems across Delray Beach regularly, and we’ve seen how much difference proper frame anchoring and level setting makes in how smoothly a slider operates for years afterward.
Technical Specifications
- Frame materials: Aluminum or vinyl, with reinforced track profiles for coastal wind loads
- Track configurations: 2-track and 3-track layouts to match existing rough openings and sill depths
- Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass
- Finish options: White, almond, bronze, black, tan
- Screen options: Retractable screen or sliding screen
- Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration, matched to your specific wind zone
- Design pressure: Matched to your wind zone, up to +/-100, never higher
Sizes vary by product line and configuration. When we quote a horizontal roller window for a Delray Beach project, we confirm exact rough opening dimensions, frame depth, and design pressure requirements before recommending a specific series. That keeps your window matched to its actual opening rather than a generic catalog entry.
Hurricane & Compliance Performance
Laminated Impact Glass
The glass in this window uses a PVB interlayer sandwiched between panes. Under impact, the glass may crack, but the interlayer holds the fragments in the frame so the building envelope stays sealed and wind-driven rain stays outside where it belongs.
Miami-Dade NOA / Florida Product Approval
Each configuration carries Miami-Dade Notice of Acceptance and Florida Product Approval numbers specific to that size, frame, and glass combination. We verify the exact approval number on your written quote so your permit submittal in Delray Beach goes through without trouble.
FBC / HVHZ Compliance
The window is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That’s the stricter standard applied in Palm Beach County, where Delray Beach sits, and it governs how the frame, glass, and anchoring perform together under storm loading.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These aren’t checkbox tests. They simulate what a real storm throws at a window, repeatedly.
Design Pressure for Your Wind Zone
Design pressures are matched to your specific wind zone, up to +/-100, never higher. Pushing a window past its rated design pressure isn’t safer; it’s wasteful. We match the window to the actual structural loads your Delray Beach home faces.
Energy Performance
Low-E and insulated glass options are available for homes that want storm protection plus better solar control. On west-facing Delray Beach elevations, a Low-E insulated slider reduces heat gain through the glass while keeping the impact rating intact.
Color & Glass Options
White and almond finishes dominate a lot of the Delray Beach market because they read clean against tropical landscaping and white stucco, but bronze and black have become the go-to for modern coastal builds and renovated mid-century homes east of I-95. Tan works well on Mediterranean-style homes and older Florida ranches where a softer warm tone ties into barrel tile roofs and earth-tone exteriors. The finish you pick is a powder-coated or anodized layer designed to hold up against salt air near the coast without pitting or fading.
Glass selection depends on orientation and privacy. Clear laminated impact glass keeps the view as clean as possible. Tinted glass cuts glare on east and west exposures. Low-E insulated glass is the pick for living rooms and bedrooms that get afternoon sun in neighborhoods like Lake Ida or Tropic Isle. Every glass option keeps the impact rating; the difference is how the window manages heat and light day to day.
Installation by TruePane Windows & Doors in Delray Beach
An impact window is only as good as the installation around it. We’ve replaced windows in Delray Beach that were technically NOA-rated but leaked or stuck because the original install was rushed, unlevel, or sealed incorrectly. A window that isn’t set level, plumb, and square will bind on the track. Even a half-inch deviation changes how the sashes glide, and over time the hardware wears unevenly.
Our installation practice follows AAMA 2400/2410 standards for window installation and AAMA 812 low-expansion foam perimeter sealant for the gap between the rough opening and the frame. Before we touch a window, we check the existing opening for rot, water damage, or framing issues that would compromise the new unit’s anchoring. Then we set the frame, shim it to level and plumb, anchor it to meet the wind zone’s uplift and shear requirements, and seal the perimeter with low-expansion foam and a compatible exterior sealant. After install, we run a water test on the opening, confirm the sashes glide evenly, and clean the site up before we call the job done.
Delray Beach brings its own considerations. Homes closer to the ocean sit in a more demanding wind zone, and the salt air is brutal on unprotected frames and hardware. Permitting here operates under HVHZ rules, so the job has to be documented with the right product approvals and installation details. We handle that properly because an improper installation compromises an NOA-rated system, and our name is on the work.
Frequently Asked Questions - Horizontal Roller & Sliding Windows
Design pressures are matched to your specific wind zone, up to +/-100, never higher. The exact design pressure for your project depends on where your Delray Beach home sits, the window’s size, and the opening’s height above grade. We confirm the rating on your written quote. Call (561) 940-2917 to get a spec matched to your actual address.
Lead time runs roughly 8 to 12 weeks from order approval for most impact slider configurations, though some finishes and custom sizes can push longer. We’ll confirm the current lead time for your exact configuration when we quote the job. Call (561) 940-2917 with your rough opening sizes and we’ll get you a timeline.
Yes, in Delray Beach your permit package will typically include the NOA or Florida Product Approval for the exact window configuration being installed. We provide the approval numbers for the windows on your quote so your submittal package is complete. Call (561) 940-2917 and we’ll explain what your specific project needs.
Sizes and configurations are built to your rough opening dimensions, within the structural limits of each product line. Two-track and three-track layouts, fixed and operable sash combinations, and mulled units are all workable. We’ll check your opening against the NOA-approved size matrix before we recommend anything. Call (561) 940-2917 to start with a free measurement.
Keep the bottom track clear of sand and debris, and wipe the track with a dry cloth every few months, more often if you’re near the beach in Delray Beach where salt and sand collect quickly. A silicone-based lubricant on the rollers once or twice a year keeps the glide smooth. Avoid petroleum-based lubricants, they attract grit and gum up the rollers. Call (561) 940-2917 if a slider starts dragging, it’s usually a simple track or roller adjustment.
Get a Quote - Horizontal Roller & Sliding Windows in Delray Beach
If you’re pricing impact windows in Delray Beach, start with a free on-site measurement and a written, line-item quote. We’ll match the right horizontal roller configuration to your openings, wind zone, and budget, and walk you through glass and finish options that actually suit your home. Call TruePane Windows & Doors at (561) 940-2917 to schedule your free estimate.
Written by the team at TruePane Windows & Doors, serving Delray Beach and surrounding Palm Beach County communities with hurricane-impact windows and doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
