Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Shingle, Tile & Metal Roofing in Delray Beach: What to Know First
Therma-Tru shingle, tile and metal roofing in Delray Beach is a service we handle as an independent Therma-Tru provider, not as a factory-authorized dealer. Most repair jobs on Therma-Tru entry systems and door units run a single visit, with pricing that reflects what the work actually requires – not what a franchise playbook says to charge. We carry the parts that matter for Delray Beach homes and we register every warranty layer in writing before the truck leaves your driveway.
This page is written for homeowners who own Therma-Tru doors and entry systems and need shingle, tile or metal roofing work done right. If that sounds like you, call (561) 940-2917 and a live person will pick up.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds a solid door. But after twenty years of Delray Beach sun, salt air, and afternoon thunderstorms, even the best entry system shows its age. Here are the failure modes we see most often in this area, and what we do about them.
- Fiberglass skin delamination on Classic-Craft and Fiber-Classic series. The fiberglass face sheet starts to separate from the door core, usually along the bottom rail where water sits after a storm. This is not a cosmetic problem. Once the skin lifts, it holds moisture against the core and the door starts to swell. We replace the affected panel or the full slab, depending on how far the separation has traveled. The fix is permanent, not a patch.
- Failed weatherstripping and sweeps on the Smooth-Star series. Smooth-Star doors are popular in Delray Beach townhome communities because they hold paint well and cost less than Classic-Craft. But the original door sweeps harden in the Florida heat within five to seven years. You will feel the draft and see daylight under the door. We replace with commercial-grade sweeps that stay flexible in the heat, which Therma-Tru’s own site will not tell you is the usual fix because they sell the OEM part.
- Rot at the sill on older Benchmark and entry units without proper flashing. Delray Beach gets sixty inches of rain a year. If the original installer skipped the sill pan or flashed the threshold wrong, water gets behind the vinyl cap and the wood underneath turns to mulch. We pull the unit, cut out the rot, set a proper sill pan, and rehang the door so it drains away from the house instead of into it.
- Glass insert seal failure on Therma-Tru doors with decorative lites. The insulated glass unit inside a Therma-Tru lite frame will eventually fog, especially on west-facing doors that take the full afternoon sun off Lake Ida or along Atlantic Avenue. The frame itself is usually fine. We replace the glass unit, re-bed it in the frame, and you get a clear view again without buying a whole new door.
- Hinge and threshold wear on heavy Classic-Craft entry doors. A solid Therma-Tru Classic-Craft with a full glass insert weighs over a hundred pounds. After fifteen years, the top hinge starts to sag and the door binds against the strike plate. We re-shim the hinges or replace them with heavier-duty units, then re-align the threshold so the door closes square and locks without force.
Our Therma-Tru Shingle, Tile & Metal Roofing Process
Every Therma-Tru job in Delray Beach follows the same sequence, whether it is a slab replacement, a sill repair, or a full entry system rebuild. No shortcuts, no surprises.
- 1
Call and talk to a person. You call (561) 940-2917. A live person answers and schedules the visit. We will be there when we say.
- 2
Inspect the unit and the opening. Our technician checks the door slab, the frame, the sill, the flashing, and the surrounding shingle, tile or metal roofing transition. We measure twice. Dale Kessler reads a rough opening the way some people read a room – quietly and carefully.
- 3
Decide parts: OEM or quality aftermarket, explained on paper. If factory Therma-Tru parts make sense, we use them. If an aftermarket option does the same job for less without voiding a warranty, we show you both options side by side on paper. You see exactly what you are buying.
- 4
Do the work, including the roofing transition. We repair or replace the door, flash the threshold correctly, and make sure the shingle, tile or metal roofing at the entry point sheds water the way it should. If the roofing transition is the problem, we fix that too.
- 5
Test and register warranties before we leave. We check the swing, the seal, the lock, and the drainage. Then we register both manufacturer warranty layers in writing, with durations stated, before the truck leaves the driveway.
- 6
Follow through on the promise. Every job carries the Done Right Promise. If something is not right, we make it right – no paperwork, no arguing.
What Therma-Tru Shingle, Tile & Metal Roofing Costs in Delray Beach
Here are the price ranges we quote most often for Therma-Tru work in Delray Beach. These are real numbers, not bait.
- Weatherstripping and door sweep replacement: $75-$150
- Threshold and sill repair with new flashing: $250-$500
- Glass insert replacement (fogged lite): $300-$600
- Full slab replacement, Smooth-Star or Fiber-Classic: $900-$1,600
- Full slab replacement, Classic-Craft with glass: $1,800-$3,200
- Roofing transition repair at entry (flashing, step flashing, underlayment): $200-$700 depending on roof type and damage
What moves the price: the condition of the framing underneath, whether tile or metal roofing at the entry needs to be lifted and reset, and the cost of OEM versus aftermarket parts. We give you a written line-item quote before any work starts. No surprise line items on the bill. Call (561) 940-2917 for an exact quote – estimates are free.
Why Delray Beach Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We have served Delray Beach and nearby communities since 2008. Dale Kessler grew up in the Lake Ida neighborhood of Delray Beach, and his father spent thirty years repairing storefronts and residential windows along Atlantic Avenue. This is not a franchise. It is a family craft tradition.
When you call us about a Therma-Tru door, you get a background-checked, uniformed technician who knows Therma-Tru specifically and also works with PGT, CGI, CWS and ES Windows. That matters because your entry system does not live in isolation. The roofing above it, the framing around it, and the threshold below it all have to work together. We understand how they fit.
Every Therma-Tru job carries the Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before we leave. We stand behind it. That is a square deal, and it is the only kind we offer. If the pane is not true, the job is not done.
FAQs
Yes, in most cases. We work as an independent Therma-Tru service provider, and we use OEM or warranty-safe aftermarket parts depending on what the job needs. We register both manufacturer warranty layers in writing before we leave, so you always know what is covered and for how long. Call (561) 940-2917 and we will check your specific unit.
On most Therma-Tru repairs we can schedule within a few business days. A live person answers the phone 24 hours a day, 7 days a week, so you will never wait on a voicemail tree. If your door will not close or lock, tell the person who answers and we will prioritize you.
It depends on what failed. A fogged glass insert or a worn sweep is a straightforward repair. But if the fiberglass skin is delaminating from the core, or the sill has rot from years of bad flashing, a full slab or full unit replacement is usually the better investment. We will show you both options on paper with real numbers and let you decide.
We handle both. Many Therma-Tru entry problems in Delray Beach start with how the shingle, tile or metal roofing meets the door opening. If water is getting in at the transition, we repair the flashing, the step flashing, and the underlayment as part of the job. A door fix that ignores the roof above it is not a fix.
Yes. We offer a permanent 5% discount for seniors and veterans, and a $50 discount on any repair over $250. The discounts are standing offers, not a limited-time promotion. Call (561) 940-2917 and we will apply them to your written quote.
If you own a Therma-Tru entry system in Delray Beach and the door, the threshold, or the roofing around it is not holding up, call us at (561) 940-2917. You will get a straight answer, a written line-item estimate, and work that is done right the first time. As Dale Kessler says: if it is not in writing, it is not a guarantee – it is a conversation.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Delray Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.