Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Roof Repair in Delray Beach: What to Know First
Therma-Tru roof repair in Delray Beach typically costs between $275 and $1,200 depending on whether we’re replacing a threshold, rebuilding a frame, or resealing a failed flashing detail. We complete most Therma-Tru repairs in a single visit, and we quote a fixed price before any work begins so the number on the bill matches the number on the estimate. This page is for homeowners who own a Therma-Tru door or roof-adjacent installation and need it repaired correctly, not patched and re-patched. Call (561) 940-2917 for a free estimate, and a live person will answer.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds doors and door systems, not roof membranes, but in Delray Beach the two meet constantly: threshold rot under covered entries, transom leaks over doorways, and failed flashing where a porch roof ties into an exterior wall. We see the same failures repeat across specific product lines, and we fix them at the source rather than chasing the symptom.
- Smooth-Star and Fiber-Classic door frames with threshold rot. These lines use composite frame material that holds up well, but Delray Beach’s wet season pushes water against the base plate for months at a time. When the roof overhang is shallow or the gutter is undersized, water pools at the threshold and wicks up into the frame. We rebuild the base, replace the threshold with a rot-proof sill, and correct the drainage so the repair outlasts the original install.
- Tru-Defense impact-rated doors with failed perimeter seals. Tru-Defense models are built for hurricane zones, but the weatherstripping and corner seals take a beating from salt air and UV. A door that seals fine in January can leak air and water by August. We replace seal components with OEM-spec materials and reset the corner gaskets so the door actually performs to its rating.
- Classic-Craft and Reserve collections with warped or binding panels. These premium fiberglass lines are dense and heavy. In humid coastal air, a door hung slightly out of plane will bind at the strike side and eventually pull the frame out of square. We rehang the slab, shim the rough opening correctly, and verify the reveal is even around all four sides. Most Delray Beach homeowners who call us about a Therma-Tru door that ‘sticks in summer’ have a frame issue, not a door issue.
- Transom and sidelite assemblies leaking at the head. When a covered porch or entry roof dies into a Therma-Tru door assembly, the flashing detail is the weak point. We regularly find caulk-only seals that have shrunk and cracked, letting water run behind the head casing. We strip the old sealant, install proper metal flashing with a drip edge, and reseal with a marine-grade sealant rated for South Florida exposure.
- OEM weatherstripping that has hardened or compressed. Therma-Tru ships with compression weatherstripping that performs well for a few years, but Delray Beach heat accelerates hardening. Once the bulb loses its memory, air and water get past it. We replace with OEM-spec seals or a proven aftermarket equivalent and adjust the strike plates so the door compresses the seal evenly.
Our Therma-Tru Roof Repair Process
Every Therma-Tru job starts the same way: with a phone call to (561) 940-2917 and a live person who knows what questions to ask. Here’s what happens next.
- 1
On-site diagnosis. We come out, inspect the door, the frame, the surrounding roof tie-in, and the drainage path. We measure the rough opening twice, the way we were taught.
- 2
Written quote with parts specified. You get a fixed price on paper, listing whether we’re using OEM Therma-Tru parts or a quality aftermarket equivalent, and why. If it’s not in writing, it’s not a guarantee, it’s a conversation.
- 3
Parts procurement. Therma-Tru parts are widely available through South Florida distributors, so we rarely wait more than a day or two. We do not substitute generic parts without telling you first.
- 4
The repair itself. We perform the work, clean up as we go, and respect the fact that we’re working in your home, not on a construction site.
- 5
Testing and verification. Before we leave, we test the door under real conditions: water, sunlight, and the actual operation of the door. We check the reveal, the seal compression, and the drainage path.
- 6
Warranty registration. Both manufacturer warranty layers are registered in writing before the truck leaves the driveway. Our Done Right Promise covers the workmanship, no paperwork fights included.
What Therma-Tru Roof Repair Costs in Delray Beach
Prices vary by the scope of the failure, but here are honest ranges for the Therma-Tru repairs we do most often in Delray Beach.
- Threshold replacement with rot repair: $350 to $750 depending on frame damage and whether we need to rebuild the base plate.
- Weatherstripping and seal replacement (full perimeter): $180 to $320 per door, including parts and adjustment.
- Flashing repair at a transom or head detail: $275 to $600 depending on access and how much metal needs fabrication.
- Rehang and realignment of a binding Therma-Tru door: $275 to $500 for a standard single door, more for Reserve or Classic-Craft panels with heavier slabs.
- Full frame rebuild after water intrusion: $800 to $1,200, the top of our range, reserved for doors where rot has compromised the structural frame.
What moves the price: how much water has gotten in, whether the rough opening needs correction, and whether you’re in a historic Delray Beach neighborhood with framing anomalies. We quote a fixed number before we start. Call (561) 940-2917 for your free estimate.
Why Delray Beach Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We’ve been serving Delray Beach and the surrounding communities since 2008, and we plan to be here for thirty more. Our technicians are background-checked, uniformed, and trained to work on Therma-Tru doors the way they’d work on their own mother’s house. We’re an independent Therma-Tru service provider, not a factory warranty depot, which means we answer to you, not to a manufacturer’s cost-control department. And when a Therma-Tru repair turns out to be a replacement situation, we quote side by side on paper: PGT, CGI, CWS, ES Windows, and more than a dozen other lines. The Done Right Promise covers every job, and a live person answers the phone 24 hours a day, seven days a week. That’s not a slogan. Try it at (561) 940-2917.
FAQs
We register both warranty layers in writing before we leave the driveway, but we cannot submit warranty claims to Therma-Tru on your behalf as an independent service provider. What we do instead is quote the repair with OEM-spec parts specified, so your door’s warranty position is preserved to the extent the original installation allows. If a prior contractor voided your warranty, we’ll tell you plainly. Call (561) 940-2917 and we’ll explain what’s covered and what’s not.
Most Therma-Tru repairs are completed in a single visit once parts are in hand, and Therma-Tru parts are readily available through South Florida distributors. The limiting factor is usually the extent of water damage, not parts. Call (561) 940-2917 and we’ll give you a straight answer on timing after we see the door.
If water has been getting into the frame for more than two or three wet seasons, the composite frame core may be too far gone to save. We’ll inspect the door, push a probe into the frame to check for soft spots, and give you an honest answer: repair if the structural material is sound, replace if it isn’t. We’ll quote both options side by side so you can see the math for yourself. Call (561) 940-2917 for an inspection.
We use OEM Therma-Tru parts whenever they’re the right call and tell you before the work starts what’s going on your door. For some seal and weatherstripping components, a proven aftermarket equivalent performs as well or better in Delray Beach’s salt air and costs less. If it’s not in writing, it’s not a guarantee - it’s a conversation, and we put every part decision in writing before we turn a screw.
No. We quote a fixed price before the first tool comes out, and the bill matches the estimate unless you approve a change in writing. No surprise line items, no change orders you didn’t ask for. Call (561) 940-2917 for a free estimate and a quote you can hold us to.
Call (561) 940-2917 to schedule your free Therma-Tru roof repair estimate in Delray Beach. A live person answers, day or night.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Delray Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.