Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterSimonton Window Replacement in Delray Beach: What to Know First
Simonton window replacement in Delray Beach is work we take on regularly, and most jobs are completed in a single visit once parts are in hand. A typical full-frame replacement for a standard double-hung Simonton unit runs $900 to $1,900 per opening in this market, depending on glass package and size. If you’re reading this, you likely have a Simonton window that’s fogged, binding, or storm-compromised, and you want a straight answer about whether to repair or replace. Call (561) 940-2917 and we’ll tell you what we’re looking at, on paper, before any work begins.
This page is written for Simonton owners in Delray Beach who need honest guidance from a company that has measured, pulled, and reset more of these units than we can count. We’re an independent Simonton service provider, not a Simonton company, which means we can tell you when aftermarket parts are the right call and when an OEM sash is the only call that protects a warranty.
How Simonton Products Fail - and How We Fix Them
Every window line has failure patterns, and Simonton is no exception. Here’s what we actually see on site, not in a catalog.
- Fogged insulated glass in Reflections and Pro-Diamond series: The desiccant strip inside the spacer fails over time, and the seal around the glass package gives out next. In Delray Beach, the daily thermal swing between air-conditioned interiors and 90-degree exterior heat accelerates this. We don’t patch fogged glass. We replace the IGU (insulated glass unit) with a new sealed unit, and we order it with the correct low-E coating for the orientation of that particular wall.
- Binding sashes on decades-old Simonton homeowners’ series units: The balance springs inside the sash frame lose tension, or the vinyl jamb liner warps from sun exposure on west-facing elevations. The fix is new balance assemblies and a check of the frame for racking. In Delray Beach, a west wall with no shade can soften a vinyl frame enough to throw the reveal off by an eighth of an inch.
- Water intrusion at the sill of Simonton storm window retrofits: A surprising amount of leakage in older Florida homes comes not from the window itself but from a failed sill pan or missing back dam behind the bottom flange. We pull the unit, inspect the rough opening, and rebuild the pan with proper slope and end dams before the new window goes in.
- Cracked vinyl welds at the sash corners of entry-level lines: Vinyl melts are strong until they’re not. We see stress cracks at the corner welds on units that have carried heavy glass packages through a few hurricane seasons. Replacement of the sash is the honest fix, not caulk.
- Failed balance shoes and tilt latches on double-hung units: These are the small parts that make a window stay open and tilt for cleaning. They break, people live with a window that won’t stay up. We replace them with the correct weight-rated shoe for the sash. If the old shoe is a discontinued design, we tell you before we touch anything.
Our Simonton Window Replacement Process
- 1
The call: A live person answers at (561) 940-2917. You describe the window. We ask the right questions: when it was installed, what the glass looks like, which wall it’s on.
- 2
The site visit: A background-checked, uniformed tech arrives, measures the opening twice, and inspects the frame, the rough opening, and the surrounding stucco or trim. We do not measure once and hope.
- 3
The parts decision: We quote OEM Simonton sashes and IGUs when warranty or fit requires them, and we quote quality aftermarket components when they are functionally equivalent. You see the two options side by side on paper.
- 4
The install: We pull the old unit or sash, correct any opening issues (shims, pan, level), and set the new window square and sealed. Silicone where it belongs, flashing where it counts.
- 5
The test: We run the sash fully closed, lock it, unlock it, tilt it out, and check the reveal. We look for light gaps and feel for drag. Then we clean the glass and run a hose test on any full-frame replacement when exterior conditions allow.
- 6
The guarantee: You get the Done Right Promise in writing, along with both manufacturer warranty layers registered and the durations stated. If the pane is not true, the job is not done.
What Simonton Window Replacement Costs in Delray Beach
Most Simonton replacement work in Delray Beach falls into these ranges:
- IGU replacement (fogged or broken sealed unit): $350-$700 per unit installed, depending on glass size, coating, and whether it’s tempered.
- Sash replacement (single double-hung sash): $400-$800, depending on series and hardware.
- Full-frame window replacement (standard double-hung): $900-$1,900 per opening, including pan, flashing, and interior trim where needed.
- Storm window replacement (full-frame, impact-rated): $1,600-$3,200 per opening, depending on size and product approvals for the wind zone.
What moves the price: glass package (impact-rated costs more but is code on new work in much of Delray Beach), the condition of the rough opening, the floor you live on, and whether the frame itself needs rebuilding. We give fixed pricing before work starts, in writing. No change orders on a square job. Call (561) 940-2917 and we’ll put numbers on your exact window.
Why Delray Beach Homeowners Call TruePane Windows & Doors for Simonton Work
Simonton is only one of the lines we service. We are an authorized installer for more than a dozen manufacturer lines, including, and PGT. That matters for you: when a Simonton unit is too far gone to rescue or a discontinued series can’t source parts, we can show you a comparable PGT or ViewLux unit side by side on paper and let you decide. Many window companies in Delray Beach sell one brand and then everything looks like that brand. We don’t work that way.
The company was founded by Dale Kessler in 2008, but the craft goes back many years through his father’s shop on Atlantic Avenue. We register both warranty layers before the truck leaves the driveway, and if something is not done right, the Done Right Promise means we fix it without a paperwork fight. A live person answers the phone 24 hours a day. We’ll be there when we say.
FAQs
Yes, we source OEM Simonton sashes, IGUs, balance assemblies, and hardware for most series, and we route through aftermarket suppliers when a factory part is discontinued. If a part is simply not available anymore, we say so at the quote stage, not after the old window is in pieces on the lawn. Call (561) 940-2917 and we’ll check your series before scheduling.
Most Simonton warranties cover the glass and frame for years after install, but that warranty can be voided by improper installation or unapproved parts. We install to the manufacturer’s requirements and register both warranty layers where applicable. If warranty status matters to you, we’ll tell you before the work starts exactly what is protected and what is not.
If the frame is square, the rough opening is dry, and the failure is glass fogging or a worn balance shoe or tilt latch, repair is usually the right call. If the frame is racked, the vinyl is cracked at the welds, or water is already inside the wall cavity, replacement is cheaper than rebuilding around a compromised frame later. We’ll show you both options and the numbers for each.
Most sash and IGU replacements are completed in a single visit once the parts are in hand, which is typically one to three weeks for a special-order OEM unit. Common stock parts are often faster. We schedule the day, show up punctually, and finish the job the same day. Call (561) 940-2917 for a free estimate on your specific window line.
When a permit is required by Delray Beach code, we pull it and the work is inspected and passed before we call the job done. For simple sash and glass replacement where no structural change is involved, permits are not typically required. We’ll tell you which situation you’re in before any work begins.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Delray Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.