Mr-Glass Impact Windows Nationwide | TruePane Windows & Doors

Mr-Glass Impact Windows in Delray Beach: What to Know First

TruePane Windows & Doors provides independent Mr-Glass impact window repair and replacement across Delray Beach, with most service calls completed in a single visit. You’ll get a straight answer on whether your Mr-Glass unit can be repaired or needs replacement, and a written line-item quote before any work begins. If you own Mr-Glass impact windows in Delray Beach and something isn’t right, call (561) 940-2917. This page is written for homeowners who want to understand their Mr-Glass windows before they spend a dollar on them.

Call (561) 940-2917

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass impact windows hold up well in South Florida, but every product line has its weak points. Here’s what we see on service calls in Delray Beach, and what we do about it.

• Mr-Glass Series 9000 casement windows: crank operator wear at the coastal zone. The crank mechanism on Series 9000 casements takes a beating within two miles of the ocean. Salt air works into the gear housing, the lubricant breaks down, and the operator starts binding. We replace the operator assembly with a stainless-gear aftermarket unit that outlasts the factory part, and we re-lubricate with marine-grade grease. The window stays in the frame; no stucco work needed.
• Mr-Glass Series 7000 single-hung: balance shoe failure in older builds. Homes built between 2005 and 2012 in Delray Beach share a common complaint: the sash on a Series 7000 single-hung won’t stay up. The original balance shoes were molded from a nylon compound that gets brittle with heat cycling. We replace both shoes per sash, not just the failed one, because the other is usually weeks behind. This is a $90-to-$180 repair depending on sash size, and it’s done in about an hour.
• Mr-Glass impact sliding doors: roller flat-spotting on the Lake Ida side of town. The Lake Ida neighborhood sits a few miles inland, but the soil shifts seasonally with the water table. Sliding door tracks settle unevenly, and the original nylon rollers on Mr-Glass sliders develop flat spots. Then the door drags. We pull the panel, inspect the track for deflection, and install stainless-steel rollers with sealed bearings. If the track has moved, we shim and re-anchor it. A door that drags is a door that gets forced, and a forced door is a door that fails.
• Mr-Glass Series 5000 fixed-lite picture windows: seal failure at the laminate interlayer. When a Mr-Glass fixed-lite unit fogs, it’s usually not the insulated glass seal. It’s the laminate interlayer separating at the edge where the impact glass was cut and polished. This shows up first on east-facing elevations in Delray Beach, where morning sun hits the glass hard. We can re-glaze the sash with a matching impact-rated unit from our fabrication partners, keeping the original frame intact. You don’t need a whole new window because one lite lost its bond.
• Mr-Glass awning windows: torque hinge sag on wide openings. Mr-Glass awning units 42 inches and wider use friction torque hinges that lose tension over time. The sash droops on the hinge side, the weatherstrip gaps, and the lock doesn’t line up. We re-tension or replace the torque hinges, realign the sash, and replace the weatherstrip with a closed-cell profile. Water intrusion at the hinge side is a direct path to frame rot, so we treat this as a same-week fix.

Our Mr-Glass Impact Windows Process

Every Mr-Glass job follows the same path. No shortcuts, no surprises.

1. 1
   The call. A live person answers at (561) 940-2917, 24 hours a day. We ask what you’re seeing, not what a previous contractor told you to say.
2. 2
   The measure. A uniformed, background-checked technician measures every opening twice. Dale Kessler reads a rough opening the way some people read a room: quietly, carefully, and without rushing to conclusions. If the frame moved, we find out before we touch a screw.
3. 3
   The parts decision. For Mr-Glass windows, we look at what factory parts are still supported. If the OEM part is discontinued or was under-engineered to begin with, we’ll recommend a quality aftermarket replacement and tell you exactly why. We put manufacturer lines side by side on paper so you see what you’re buying. PGT, CGI, CWS, and ES Windows are all options we service and quote.
4. 4
   The work. We repair or replace in place whenever possible. Most Mr-Glass jobs are completed in a single visit. You get upfront pricing; the number on the estimate is the number on the bill.
5. 5
   The test. After the install, we cycle the window or door through its full range of motion, check the seal, and verify the hardware. If the pane is not true, the job is not done.
6. 6
   The paperwork. Both manufacturer warranty layers are registered in writing, with durations stated, before the truck leaves your driveway. The Done Right Promise covers the workmanship, with no paperwork fights and no arguing.

What Mr-Glass Impact Windows Costs in Delray Beach

Here are honest numbers for the Mr-Glass scenarios we see most often in Delray Beach. These are real ranges based on what we’ve billed in this market, not national averages.

• Balance shoe replacement on a Series 7000 single-hung sash: $90-$180 per sash
• Crank operator replacement on a Series 9000 casement window: $110-$220 per window
• Stainless roller replacement on a Mr-Glass sliding door: $140-$280 per panel
• Torque hinge replacement on a Mr-Glass awning window: $80-$150 per hinge pair
• Re-glazing a fogged Mr-Glass fixed-lite with a matching impact unit: $450-$950 per lite, depending on size
• Full Mr-Glass impact window replacement (mid-range series): $900-$2,400 per opening, installed

What moves the price: the series, the size, whether the frame is still square, and whether the glass is standard impact or high-VLT low-E. We’ll never quote you blind. Call (561) 940-2917 for a free estimate with written line items. We’ll be there when we say.

Why Delray Beach Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We’ve been serving Delray Beach since 2008 through the heritage Dale Kessler started in 2008. We fix Mr-Glass windows the way we fix every window: with the frame measured twice, the warranty registered in writing, and a 90-day promise that if it’s not done right, we make it right. No fine print that covers neither. Our techs are background-checked, uniformed, and trained on Mr-Glass specific hardware, so they know a balance shoe from a torque hinge without a 20-minute phone call. And when a Mr-Glass unit is beyond reasonable repair, we quote PGT, CGI, CWS, and ES Windows side by side so you can compare real options. As an independent Mr-Glass service provider, we answer to you, not to a manufacturer’s call center. If the pane is not true, the job is not done. That’s the founding rule, and it still runs the place.

FAQs