Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Custom & Geometric Windows in Delray Beach: What to Know First
TruePane Windows & Doors serves Delray Beach homeowners as an independent Mr-Glass service provider, repairing and replacing custom and geometric windows, arched units, and oversized openings. Most Mr-Glass window work in Delray Beach runs $400 to $2,800 depending on glass shape, frame condition, and whether we’re repairing or replacing. A custom geometric unit typically takes 4 to 8 weeks from measure to install because the glass is cut and tempered to the exact opening, not pulled off a shelf. Call (561) 940-2917 and a live person answers, day or night.
This page is written for the homeowner who owns a Mr-Glass shaped window that’s fogged, cracked, or binding, and who wants straight answers about what it costs and how long it takes. We’ve worked on enough Mr-Glass units in Delray Beach to know their quirks.
How Mr-Glass Products Fail - and How We Fix Them
- Fogged seals on trapezoid and half-round units. Mr-Glass geometric windows use insulated glass units with a polysulfide or silicone seal. After 12 to 18 years in Delray Beach’s salt air and summer humidity, that seal breaks down and the argon escapes. You get a hazy film between the panes. We replace the IGU with a new sealed unit cut to the exact non-rectangular template, not a field-glazed shortcut.
- Frame racking on oversized picture windows. Large Mr-Glass picture windows, particularly those spanning 8 feet or wider, can rack out of square over time as the concrete block settles. The glass doesn’t break; the sash binds and the weep system stops draining. We open the wall to check the header, re-shim the frame, and re-bed the glass. If the rough opening wasn’t square to begin with, we fix that first.
- Stress cracks at the corner of an arch top. Mr-Glass arch windows are annealed glass cut to a radius. If the installer nicked the edge during glazing or the frame shifts, the nick becomes a stress crack that runs across the glass within a year or two. DelrayBeach heat cycling speeds this up. We replace the pane with a clean-cut radius and set it with proper edge clearance so it doesn’t happen again.
- Damaged glazing bead on shaped aluminum frames. Mr-Glass aluminum frames used a vinyl or rubber glazing bead that dries out and shrinks in sun exposure. The bead pulls away at the corners of a geometric unit, and water wicks inside. Left alone, the frame corrodes and the glass eventually sags. We strip the old bead, inspect the channel, and install a new EPDM bead that holds its shape.
- Failed balance springs in Mr-Glass casement and awning geometric windows. Shaped casement windows put uneven load on the hinge and balance mechanism. We see worn friction stays and bent operator arms on Mr-Glass units in Delray Beach homes near the Intracoastal. We replace the hardware with OEM-spec parts and adjust the sash so it opens square and stays where you put it.
Our Mr-Glass Custom & Geometric Windows Process
- 1
Call and talk to a person. You reach us live at (561) 940-2917. We ask what the window does: fogged, cracked, hard to open, leaks in a storm.
- 2
We measure and diagnose on site. A uniformed technician comes to your Delray Beach home, takes the glass template, checks the frame for square, and identifies the exact failure mode. No guesswork over the phone.
- 3
We write the parts decision on the quote. For Mr-Glass windows, we explain whether an OEM part makes sense or a quality aftermarket equivalent will do the job for less. You see both options on paper.
- 4
We order or template the glass. Custom geometric and arch lites go to cutting and tempering. Standard-size repairs can often be done the same visit. We tell you the timeline before you sign.
- 5
Install, test, and register. Two technicians set the glass, square the frame, run water to test for leaks, and clean up. Every job carries the Done Right Promise and both warranty layers in writing.
What Mr-Glass Custom & Geometric Windows Costs in Delray Beach
| Mr-Glass Window Job | Typical Cost in Delray Beach |
|---|---|
| Glass-only replacement, rectangular fixed unit | $400 - $750 |
| Glass-only replacement, arch or geometric lite | $600 - $1,200 |
| Full frame replacement, standard shaped window | $800 - $1,700 |
| Custom oversized or curved unit, frame and glass | $1,800 - $2,800+ |
What moves the price: glass size and shape, whether the frame is aluminum or vinyl, if the opening needs structural correction, and if impact-rated glass is required by code. Delray Beach is in a High Velocity Hurricane Zone, so impact glass and frame anchoring add cost on exterior openings. We give a written line-item quote before any work starts. Call (561) 940-2917 and we’ll come measure your window, for free.
Why Delray Beach Homeowners Call TruePane Windows & Doors for Mr-Glass Work
Because a Mr-Glass custom window is not a standard window, and guessing costs money. Our technicians know how Mr-Glass frames behave in coastal heat and humidity, and they won’t sell you a replacement when a proper repair will hold. We’re authorized installers for PGT, CGI, CWS, and ES Windows, too, so if the frame can’t be saved, we can quote several replacement lines side by side. And we stand behind the work: the Done Right Promise, warranty registrations in writing, and a live person on the phone 24/7. Dale Kessler founded this company on a simple rule: if the pane is not true, the job is not done.
FAQs
No. As an independent Mr-Glass service provider, our repair work does not void any original warranty, though we’ll check whether the window is still under coverage before we recommend a paid repair. If the factory warranty remains active, we’ll tell you and help you file the claim. Call (561) 940-2917 and we’ll check the serial number and date stamp.
A fogged geometric window can be fixed by replacing the insulated glass unit, and you don’t need to replace the entire frame. We template the exact shape, order a new sealed unit, and install it in the existing frame. The cost runs about $600 to $1,200 in Delray Beach depending on size and shape. Call (561) 940-2917 for a free in-home measurement.
Most custom geometric and arch glass takes 4 to 8 weeks from template to install, depending on tempering and coating lead times. Standard rectangular replacements can often be done same-week. We’ll give you a written timeline before you commit to anything.
Yes, usually. We take a small sample or use a glass-shade meter to match the low-E coating and tint of the remaining panes. In a multi-window opening, the goal is a match you can’t spot from the curb. There’s no extra charge for shade matching on most jobs.
When exterior impact-rated windows are replaced in Delray Beach, permits are required, and we pull them and schedule inspections. Interior-only glass replacement typically doesn’t require a permit. We’ll tell you at the estimate which applies to your job. Call (561) 940-2917 and we’ll walk you through it.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Delray Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.