ES Windows Energy-Efficient Windows Nationwide | TruePane Windows & Doors

ES Windows Energy-Efficient Windows in Delray Beach: What to Know First

We install, replace, and repair ES Windows energy-efficient windows in Delray Beach as an independent service provider, not a manufacturer dealer. Most single-window jobs are completed in one visit, and an honest price is given before any work begins, on paper, with both warranty layers registered in writing before our truck leaves your driveway. We are not the cheapest bid in Delray Beach, and we don’t try to be. We fix it right the first time, and the price we quote is the price you pay.

Call (561) 940-2917

This page is for homeowners in Delray Beach who own ES Windows and want them working the way they should: sealed, square, and keeping the South Florida heat on the outside. If that’s you, call (561) 940-2917 and a live person will answer. That’s a standing rule here, not a slogan.

How ES Windows Products Fail - and How We Fix Them

ES Windows builds a solid aluminum frame product, and we’ve seen enough of them in Delray Beach to know exactly where they show their age. Here are the failures we see most often, by symptom.

• Fogged glass on the 2000 series sliders. The 2000 series sliding windows were installed in a lot of Delray Beach homes during the early 2000s building years. The original glazing tape dries out in the salt air and constant sun, the seal lets go, and you get condensation between the panes. Once the desiccant inside the spacer is saturated, no amount of wiping helps. We replace the insulating glass unit with a Low-E argon-filled unit and re-glaze the sash properly, not just pump silicone around the edge and hope.
• Failed interlock weatherstripping on casement windows. ES casements rely on a vinyl interlock strip where the two sashes meet. After eight to ten years of Florida sun, that strip turns brittle and cracks, and you feel a draft against the back of your hand on a July afternoon. We replace it with a durometer-matched aftermarket profile that holds its shape in the heat, instead of the OEM part that will crack the same way in the same number of years.
• Warped operator arms on awning windows. The awning operator arm on ES units is a single-arm crank mechanism. When a homeowner forces the window past its stop because the arm is binding, the arm bends, the sash sags, and the corner gasket no longer seats. Your window is now an air leak regardless of what the glass rating says. We replace the arm and re-set the sash alignment so the compression seal closes evenly all the way around.
• Hard water staining and frame channel corrosion near the coast. Homes east of Federal Highway in Delray Beach get more salt exposure than the rest of the city. The lower track channels on ES sliders collect salt deposits that pit the anodized aluminum finish. That pitting is cosmetic, but the same salt is eating away at the roller bearings, which is mechanical. We flush the track, replace the rollers with stainless-bearing units, and treat the channel so it drains properly.
• Original single-pane glass doing the job of an energy-efficient window. This is the one that surprises people. Some ES Windows from the 1990s shipped with single-pane glass. Homeowners think they have thermally efficient windows because they own a respected brand, but the glass is doing nearly nothing to stop heat gain. We can often retro-fit the existing ES frame with a dual-pane Low-E IG unit that brings the window to current ENERGY STAR levels for the South Florida climate zone, without replacing the entire window. That’s a significant cost difference, and it’s the first thing we check.

Our ES Windows Energy-Efficient Windows Process

Every ES Windows job follows the same steps, whether it’s a fogged glass replacement or a full retrofit to energy-efficient glass. Here’s what you can expect when you call us in Delray Beach:

1. 1
   The call. You reach a live person. We listen to the symptom, ask about the window’s age and location in the house, and schedule the visit.
2. 2
   The measure. A background-checked, uniformed tech arrives and measures the rough opening twice, the way Dale Kessler measures a frame: once carefully, then again to be sure. We also measure the existing glass package thickness so we know exactly what IG unit will fit.
3. 3
   The diagnosis. We identify what failed and why. If it’s a seal, we say so. If it’s an operator arm, you’ll see it before we order a part. If the frame is sound and glass is the only issue, we tell you that too, and you get a side-by-side quote on paper showing each glass option with its performance numbers and warranty duration.
4. 4
   The parts decision. We use OEM ES Windows parts where they make sense, and quality aftermarket parts where experience says they outlast the original. You’ll know which is which, and why, before you approve anything.
5. 5
   The work. We remove the old unit, prep the opening, set the new glass or hardware, and check the pane with a level in both directions. If the pane is not true, the job is not done. That rule governs every install that leaves our shop, and it’s the reason we named the company TruePane.
6. 6
   The close. We test the window through its full range of motion, clean the work area, and register both warranty layers in writing before the truck leaves your driveway. You get a copy. So do we. If something is not right, the Done Right Promise means we make it right, no paperwork fight and no arguing.

What ES Windows Energy-Efficient Windows Costs in Delray Beach

Costs vary by glass size, frame condition, and what failed. Here are honest ranges for what we commonly see in Delray Beach:

• Fogged glass replacement in a 2000 series slider, dual-pane Low-E IG unit: $280 to $520
• Single window weatherstripping and interlock replacement: $175 to $340
• Full retrofit of a standard ES casement from single-pane to ENERGY STAR dual-pane Low-E with argon: $600 to $950
• Awning operator arm replacement with re-alignment: $240 to $410
• Whole-home glass retrofit assessment with window energy audit and written report: $150, credited toward work if you proceed

What moves the price is glass size, access, and whether the frame needs re-work before new glass goes in. We don’t pad the bill and we don’t find surprises once the window is on the table. You get a written line-item quote before any work starts, and that number does not change. Call (561) 940-2917 for a free estimate on your specific ES Windows setup.

Why Delray Beach Homeowners Call TruePane Windows & Doors for ES Windows Work

Dale Kessler grew up in the Lake Ida neighborhood of Delray Beach. His father spent thirty years repairing storefronts and residential windows along Atlantic Avenue, and Dale learned the fundamentals of glazing and frame installation at Palm Beach State College before spending the better part of two decades working through every window type the South Florida climate can punish. TruePane has served local communities since 2008 through that same craft tradition, and we plan to be here in another thirty.

We work on ES Windows, Andersen, Pella, and PGT, so when we quote you a side-by-side comparison, it’s grounded in hands-on knowledge of each line, not a brochure. The Done Right Promise backs every job, and both manufacturer warranty layers are registered in writing before we leave. A live person answers the phone 24 hours a day, seven days a week, not a voicemail tree and not a call center in another state.

FAQs