Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Energy-Efficient Windows in Delray Beach: What to Know First
We repair and replace CWS energy-efficient windows throughout Delray Beach as an independent CWS service provider, typically completing most single-window jobs in one visit. A fogged or drafty CWS unit usually costs between $185 and $520 to put right, depending on the glass package and frame condition. This page is for the CWS owner who wants to know exactly what failed, what it should cost, and whether the fix will hold. Call (561) 940-2917 for a straight answer on your windows.
How CWS Products Fail - and How We Fix Them
We’ve worked on enough CWS windows in Delray Beach to recognize the patterns. The failures are rarely mysterious once you know where to look.
- Seal failure in the 1900 and 2000 series. The warm, humid air that moves through Palm Beach County from April through October works against the insulated glass seals. A CWS window that’s ten or twelve years old will often start showing condensation between the panes, usually at the bottom corner first. The fix is a new insulated glass unit sized to the existing sash, not a patch. We measure the rough opening and the sash both, and we order the glass accordingly.
- Warped vinyl sashes on east-facing runs. A CWS single-hung in a Delray Beach home that takes direct morning sun for years will sometimes bow just enough to break the weatherstripping contact. That’s an energy leak you feel as a warm draft in the summer. We often replace the sash rather than the whole frame, which keeps the cost down and preserves the original trim.
- Hardware fatigue on casement operators. The crank assemblies on older CWS casement windows wear at the gear teeth, so the sash won’t seat tightly against the frame. When the window doesn’t close flush, the low-e glass isn’t doing its job. We replace the operator and realign the sash, and we check the seal all the way around before we call it done.
- Low-e coating degradation near the coast. Homes on the barrier island or within a mile of the Intracoastal deal with salt and sun that punish window coatings. We see CWS units where the low-e layer has begun to turn, leaving a slight haze that homeowners mistake for dirt. If the coating is compromised, we quote a replacement glass package with the right low-e rating for your elevation, and we talk you through the difference between a standard double pane and a triple pane with argon.
- Fogging caused by failed desiccant, not just a bad seal. This is one most homeowners have never heard of. Inside every insulated glass unit there’s a desiccant strip inside the spacer that absorbs residual moisture. On some older CWS units that strip saturates and can’t hold any more, so moisture accumulates even if the seal looks fine. Replacing the glass unit is the fix. Caulking the exterior won’t touch it.
Our CWS Energy-Efficient Windows Process
Here’s how a CWS job goes from your first call to the final walkthrough.
- 1
You call (561) 940-2917 and a live person answers. No voicemail tree. We write down what you’re seeing, pull up your address, and schedule a time that works for you.
- 2
We measure the opening twice. Every CWS frame and sash gets measured with the trim off where needed. We check the frame for square, because a window that’s out of true will fight every new component you put in it.
- 3
We quote OEM and quality aftermarket options side by side on paper. CWS parts availability has been inconsistent over the years, so we price what’s available and tell you honestly which option will hold up in your specific exposure. You see the numbers before you approve anything.
- 4
We do the work in one visit whenever possible. The sash, the glass unit, the hardware, the weatherstripping. We set it, shim it, and fasten it so the reveal is even on all four sides.
- 5
We test the seal and the operation. We run a smoke test on the weatherstripping, we check the low-e orientation with a detector, and we run the sash back and forth until it moves right.
- 6
We register both manufacturer warranty layers in writing. That’s The Keystone Standard. We hand you the paper before we leave your driveway, not an email three days later.
What CWS Energy-Efficient Windows Costs in Delray Beach
Delray Beach pricing on CWS work moves with the scope, but here are honest ranges based on the jobs we see most often in the neighborhoods from Lake Ida to Tropic Isle.
- Insulated glass unit replacement for a CWS double-hung: $185-$340 per sash
- Full sash replacement with new low-e glass: $280-$480 per sash
- Casement operator and realignment: $150-$275 per window
- Full frame replacement with an energy-efficient double-pane unit: $550-$900 per opening
- Triple-pane argon upgrade for coastal elevation: $180-$320 more per window than comparable double-pane
What moves the price is glass thickness, argon versus standard air fill, and whether the frame itself is still square. We also honor a permanent 5% discount for seniors and veterans, and we offer a free written repair estimate. Call (561) 940-2917 for a free estimate with the numbers in writing.
Why Delray Beach Homeowners Call TruePane Windows & Doors for CWS Work
Dale Kessler built this company on a rule that’s been on the whiteboard since day one: if the pane is not true, the job is not done. That applies to a CWS window as much as to any other line we touch. We’ve been serving Delray Beach and the surrounding communities since 2008 through a heritage that started with Dale’s father repairing storefronts along Atlantic Avenue. We hire local, train our own technicians, and every one of them is background-checked and uniformed before they step onto your property. When a CWS part isn’t available, we can quote you a quality alternative from Andersen, Pella, PGT, or ViewLux so you’re never stuck waiting on a backorder. The Done Right Promise covers the work, and we stand behind it in writing.
FAQs
We’re an independent service provider, not a CWS-authorized dealer, so we don’t process CWS warranty claims directly. What we do is register both manufacturer warranty layers on any new glass or hardware we install, in writing, before we leave the driveway. If you have an active CWS warranty, we’ll help you understand what it covers and whether a repair or replacement makes more sense under your specific terms. Call (561) 940-2917 and we’ll walk you through it line by line.
Most single-window CWS repairs are completed in one visit, usually two to three hours on site, and you can schedule a firm arrival time when you call (561) 940-2917. If we’re replacing an insulated glass unit, the glass is ordered to your exact measurements and the job is completed in one follow-up visit when the unit arrives.
If the frame is square, the sash is sound, and the issue is a failed seal, fogged glass, or worn hardware, a repair is usually the right call and runs a third to half the cost of a full replacement. If the vinyl frame has warped in the Delray Beach sun or the window is north of twenty years old, we’ll tell you that too, because putting new glass in a failing frame is throwing money away. We quote both paths on paper so you can see the numbers before you decide.
No. We price the job upfront, in writing, and the number we quote is the number you pay. The only time a number changes is if you approve a change in scope, like upgrading from a standard low-e to a triple-pane argon unit, and that approval happens before we order anything. No surprise line items on the bill. That’s a square deal.
Sometimes, yes. If the glass itself is still performing but the window leaks air around the sash, new weatherstripping, realigned hardware, and a proper seal can recover a surprising amount of efficiency for under $200 a window. If the low-e coating has degraded or the seals have failed, no amount of weatherstripping will fix it. Call (561) 940-2917 and we’ll tell you which situation you have, with a free estimate either way.
If you own CWS windows in Delray Beach and they’re fogged, drafty, or just not holding up the way they should, call (561) 940-2917. We’ll give you a straight answer, a written estimate, and the work done right the first time. If it is not in writing, it is not a guarantee, it is a conversation.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Delray Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.