CGI Windows & Doors in Golf, FL

CGI Windows & Doors in Golf, FL | TruePane Windows & Doors

We service and replace CGI impact windows and doors throughout the Village of Golf. Most of our work here involves original CGI Estate Collection and Sentinel Series units from the 1980s and 1990s that have spent decades in salt air. What makes our CGI work in Golf different is that we know how the village’s custom openings, strict architectural review, and Palm Beach County’s product-approval process interact. If your CGI windows are binding, fogging, or corroding at the frame corners, call (561) 940-2917 for a straight answer on whether repair or replacement is the right call.

Call (561) 940-2917

Why Golf Residents Choose Us for CGI Service

We’re an independent CGI service provider. That matters in Golf, because you get our honest assessment of the window or door itself rather than a sales pitch tied to a factory quota. Our technicians have worked on CGI’s impact-rated lines across Palm Beach County’s coastal enclaves for years, but we make no claim to be factory-authorized, because we’re not. What we are is thorough. Dale Kessler has been reading rough openings and frame failures in South Florida since 2008, and he trained us to measure twice, write everything down, and stand behind the work. Golf homeowners tend to keep their properties for decades. They want a company that will still answer the phone if a seal fails three years from now. We plan to be that company.

When we quote CGI work in Golf, we write both manufacturer warranty layers on paper before the truck leaves. That’s our Keystone Standard, and it’s backed by the Done Right Promise: if it’s not right, we make it right with no paperwork argument.

Common CGI Windows & Doors Problems We Solve in Golf

Golf’s climate works on window hardware the same way it works on everything else left outside for thirty years: slowly, then all at once. What we see most often in the village’s custom-built homes forms a familiar pattern.

• Frame-edge corrosion. Salt-laden humidity attacks powder-coated aluminum at the sill corners and weep holes of older CGI frames. On homes east of Golf Road, this shows up as white, chalky pitting where the coating has worn thin. Left alone, it compromises the frame’s structural bite on the anchor screws.
• Fogged insulated glass. Intense UV breaks down CGI’s rubber glazing seals, letting moisture into the airspace between panes. You’ll notice it first as a haze that never wipes clean. On impact-rated units, a fogged lite is a failed lite, period. The laminate is still bonded to the glass, but the insulation value and the view are gone.
• Stiff casement operation. Original CGI casement sashes on 1970s and 1980s-era Golf homes often bind at the hinge side. The weatherstripping has hardened into plastic, and the hinge mortises have worn oblong. Forcing the crank only tears up the operator gears.
• Sliding door rollers pitting. CGI stainless steel roller assemblies on sliders and pocket doors pit in the coastal air. A pitted roller grinds, jumps the track, or wears the bottom rail of a heavy impact panel. When a 250-pound CGI Estate door starts to feel like it’s dragging gravel, that’s the roller, not the track.
• Misaligned sashes on oversized customs. Many Golf homes were built with non-standard CGI units ordered to fit grand window openings. Decades of cyclic wind loading sag those large sashes a fraction of an inch. The result is an air leak at the meeting rail and a latch that no longer catches without a shove.

CGI Service in Golf: What Local Conditions Mean for Your Equipment

Here’s something that does not apply equally in Palm Beach Gardens or Lake Park: the Village of Golf has no municipal building department. None. Every CGI replacement permit runs through Palm Beach County’s system, and county reviewers check that each CGI model number and installation detail matches the Florida Product Approval record exactly, down to the anchoring pattern. We’ve watched contractors from neighboring cities stall out on Golf projects because they submitted a product sheet instead of the county’s specific product-approval lookup. The county does not grandfather original installations. If you’re replacing a window on a 1980s Golf Road estate, the new unit must carry current Florida Product Approval for the applicable design-pressure rating. We know which CGI models clear that bar and which older model numbers require a different spec. That knowledge is the difference between a permit signed off in one cycle and a job that sits in county review for weeks while a homeowner pays carrying costs on a construction delay.

A field example: We replaced a set of original CGI Estate Collection casement windows on a home off Golf Road where the salt air had turned the aluminum frame corners white with corrosion and the sashes no longer sealed. Our crew pulled the old units, ordered the same CGI model line with current Florida Product Approvals for the county’s wind-zone rating, and installed full-frame replacements with new stainless steel hinges and fresh weatherstripping. The county inspector signed off without a single correction.

CGI Models & Products We Service in Golf

We work on the CGI product lines most common in Golf’s custom housing stock: the Sentinel Series impact windows, the Estate Collection impact windows, the Targa Series impact windows, and the Commercial/Architectural Series impact doors. Most of what we see in the village is Estate Collection and older Sentinel work from original construction. Our parts approach is straightforward. We prefer genuine CGI replacement components such as hinges, rollers, weatherstripping, and multi-point lock hardware for safety and fit. When the factory part is discontinued, we’ll use a high-quality aftermarket equivalent for non-structural items like handle sets and screens. What we won’t do is chase a compromised glass unit or frame extrusion with a patch job. If the glass or the aluminum is done, the sash or the whole window gets replaced. For more detail on the lines we carry and service, see our CGI sales & service page.

CGI Service Pricing in Golf

FAQs - CGI Windows & Doors in Golf

Can you replace my original CGI windows in Golf without triggering a full wind mitigation upgrade?
Yes. Palm Beach County’s code does not require a whole-house wind mitigation retrofit when you replace a single failed unit. What it does require is that the replacement window itself meets current Florida Product Approval for the opening’s design-pressure rating. You can replace one window at a time, and we handle the permit paperwork for you. Call (561) 940-2917 for an exact quote on your first opening.

Why does my CGI sliding glass door slam harder than it used to in my Golf home?
Almost always, a pitted or seized roller. Coastal air pits the stainless roller bearings until the panel rides on the flat spot, forcing you to push harder to overcome the drag. Replacing the rollers with fresh OEM components restores the glide. If you hear grinding or see metal shavings on the track, call (561) 940-2917 before the bottom rail wears through.

Do you handle the Palm Beach County permit paperwork for CGI window replacement in Golf?
Yes. We pull the county permit, submit the CGI product-approval documentation exactly as the county reviewer expects it, and schedule the inspection. The Golf process has specific submittal requirements that trips up contractors who normally work in cities with their own building departments. We know what the county wants and we get it right the first cycle. Call (561) 940-2917 and we’ll walk you through the timeline.

Can you repair a fogged CGI impact window in my Golf house, or does the whole unit need replacing?
A fogged lite means the seal has failed and the insulated glass unit is gone. The impact laminate itself may still be intact, but you cannot reseal a failed IGU. In most Golf homes, the practical fix is a replacement sash or full-unit replacement depending on the CGI series and age. Our estimate will show you both options with pricing. Call (561) 940-2917 for a straight read on your specific window.

Are CGI windows from the 1990s in Golf still up to code for a remodel?
A 1990s-era CGI impact window is not automatically compliant with current Palm Beach County wind-zone requirements. Compliance depends on the original Florida Product Approval record and whether the anchoring system matches what the county code now requires for that wind zone. We can research the product approval on your existing units and tell you before you spend a dollar on remodel drawings. Estimates are free; call (561) 940-2917.

Service Areas Near Golf

We work throughout Golf and the surrounding Palm Beach County coastal villages, including Delray Beach, Gulf Stream, Ocean Ridge, Manalapan, and Boynton Beach. For residents in those communities, see our CGI service in Delray Beach and CGI service in Gulf Stream pages. Our full coverage area is detailed on the Golf service area page.

Book Your CGI Service in Golf Today

If your CGI windows are corroded, fogged, or binding, we’ll send a background-checked technician who has worked on Golf Road estates and knows what the county needs. Call (561) 940-2917 to schedule your free estimate. A live person answers, 24/7.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Golf since 2008.