Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Window Installation in Delray Beach: What to Know First
CGI window installation in Delray Beach runs $180 to $420 per opening for a standard retrofit, and $900 to $2,100 per opening for a full-frame tear-out and reinstall, depending on the product line and what the existing opening gives us to work with. Since we are an independent CGI service provider, not a manufacturer warranty claim desk, we can usually have a technician at your house within a day or two, with a written quote in hand. Most single-opening jobs get done in one visit. This page is for the homeowner who already owns CGI windows, trusts the product, and wants installation done with the letter of the warranty preserved.
If your CGI windows came in from a big-box sub or a builder crew and something has never looked right since, you are the person we’re writing this for. Call (561) 940-2917 and the phone is answered by a person.
How CGI Products Fail - and How We Fix Them
- Estate Collection frame racking and corner gaps. CGI’s Estate Series carries a heavier sash than their mid-tier lines, and we see the frame corners drift on second-story openings in older Delray Beach concrete-block homes when the original install skipped shim points at the corners. The symptom is daylight or draft at the lower corner of the frame in August. We pull the trim, reset the frame at all four corners against a level and a square, and re-shim before re-caulking. It is the difference between a window that seals and one that keeps arguing with the weather.
- Sentinel Series sash-channel binding. The Sentinel line uses a snug channel tolerance that binds when the original installer set the frame even slightly out of true. The homeowner calls it a hard-to-crank or hard-to-slide window. We do not lubricate our way past a frame that is out of square. We measure the diagonal, correct the frame set, and the sash glides the way CGI built it to glide.
- Fixed-frame seal adhesion failures near the coast. CGI fixed and picture windows in Delray Beach sit close enough to salt air that the sealant between the frame and the stucco returns to powder faster than inland homes. On a reinstall, we use a marine-grade sealant bead and a backer rod instead of a cosmetic caulk smear. It lasts years longer, and it does not leave the homeowner chasing a fogged perimeter every other season.
- Awning and casement hinge fatigue from wind loading. CGI awning and casement windows carry their sash weight on an arm hinge that takes a beating in hurricane-season wind cycles. We see the sash drop two or three degrees from level after a few bad summers, and that misalignment lets water in at the lower latch side during a driving rain. We reset the sash, replace the worn hinge arm with the OEM or a matched-grade aftermarket part, and re-torque every mounting screw to the manufacturer’s spec.
- Impact-glass delamination around the edges. In a small number of older CGI units, the laminated interlayer begins to cloud at the glass edge after fifteen or more years of Delray Beach humidity. The glass itself is still impact-rated, but the cosmetic fog will not reverse. When we encounter that, we tell the homeowner plainly whether their line’s warranty window is still open, and we quote a glass-pack replacement if it is not.
Our CGI Window Installation Process
- 1
You call, a person answers. We take the address, the window type if you know it, and what the window is doing that it should not be doing. We do not route you through a call center.
- 2
The technician arrives and measures twice. We check the rough opening, the existing frame, the reveal, and the square. Dale Kessler grew up in the Lake Ida neighborhood of Delray Beach, and he still reads a rough opening quietly before anyone reaches for a tool.
- 3
We lay out the parts decision in writing. If OEM parts are still available and under warranty, we use them. If not, we show you the matched aftermarket option and the price difference on paper. You decide with all the numbers in front of you.
- 4
The install gets done to the Keystone Standard. We set, shim, level, square, and seal properly the first time. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves the driveway.
- 5
We test the window with you standing there. We cycle it, lock it, and run a paper test around the seal so you can see the result. If the pane is not true, the job is not done.
- 6
The Done Right Promise starts. If anything is not right, we come back and make it right. No paperwork fights and no arguing.
What CGI Window Installation Costs in Delray Beach
Here is the honest range for Delray Beach homes, based on the opening and the job:
- Standard single-window retrofit: $180 to $420 per opening, including setting, sealing, and trim work.
- Full-frame tear-out and reinstall: $900 to $2,100 per opening, depending on trim replacement, stucco repair, and whether we are resetting an Estate Series or a lighter line.
- Hinge, locking, and sash-channel corrections: $120 to $340 per window.
- Glass-pack replacement for failed or delaminated units: $400 to $1,300 depending on size and impact rating.
The two things that move the price most are the frame’s condition once we open it, and whether the original install left hidden shim or seal damage we need to correct. That is why we quote after measuring, never over the phone. Call (561) 940-2917 and we will schedule your free estimate with a written line-item price, so there are no surprise line items on the bill.
Why Delray Beach Homeowners Call TruePane Windows & Doors for CGI Work
We have been serving Delray Beach and the surrounding communities since 2008 through a family craft tradition, and we are the kind of company that plans to be here answering the phone in thirty years. Our technicians are background-checked, uniformed, and they measure every opening twice. Every install gets the Done Right Promise and The Keystone Standard. Both warranty layers, registered in writing, before we leave the driveway. If it is not in writing, it is not a guarantee. It is a conversation. And when a CGI window is truly beyond saving, we are also an authorized installer for, and PGT, so we can quote a replacement side by side against the repair. You will see exactly what you are buying, and we stand behind it.
FAQs
No, not when the work is done by a licensed contractor who preserves the original frame warranty conditions and keeps the install within manufacturer specifications. We register both warranty layers in writing, with durations stated, before the truck leaves the driveway, and we document every step so your warranty chain stays intact.
In most Delray Beach homes, yes. We correct frame set, sash alignment, hinge fatigue, and seal failures before recommending a full replacement, and we only suggest replacement when the unit is genuinely beyond economical repair. Call (561) 940-2917 and we will tell you which side of that line your window is on.
We are usually at your door within a day or two of your call, with a written quote in hand. A live person answers the phone 24 hours a day, 7 days a week, so you will never be chasing a callback.
Yes. We set every impact-rated CGI unit to the current Florida Building Code requirements for high-velocity hurricane zones, and we pull permits and pass inspections on every installation that requires them. The work gets done right the first time, and it gets inspected the way it should.
Read the etching in the corner of the glass, and we will match it to the line - Estate, Sentinel, or one of the earlier series. Bring the photo to your estimate and we will give you the exact parts and labor picture before any work starts.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Delray Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.