CGI Shingle, Tile & Metal Roofing Nationwide | TruePane Windows & Doors

CGI Shingle, Tile & Metal Roofing in Delray Beach: What to Know First

CGI shingle, tile, and metal roofing in Delray Beach can be serviced, repaired, or replaced by TruePane Windows & Doors as an independent CGI service provider. Most CGI roof repairs run $450 to $1,800 depending on the scope, and we typically complete single-issue jobs in one visit. We’re not the cheapest bid in town, and we won’t pretend to be. What you get is a written line-item quote, a crew that shows up when we say, and work backed by our Done Right Promise.

Call (561) 940-2917

If you own a CGI roof and something’s off, a leak, a lifted tile, loose metal flashing, or a shingle line that’s starting to curl, call (561) 940-2917. A live person answers. We’ll talk through what you’re seeing and schedule a free estimate.

How CGI Products Fail, and How We Fix Them

CGI makes a solid product line, purpose-built for South Florida wind and salt air. But every roof system has its known weak points, and after years of working on Delray Beach homes, we’ve learned exactly where CGI roofs tend to give first.

• Shingle granule loss on the CGI Stormtite line. Older Stormtite shingles in Delray Beach often lose their mineral granules faster near roof valleys and eaves, where runoff concentrates. The cause is usually years of salt-laden morning dew sitting on the shingle surface, not a manufacturing defect. Once granule loss exposes the asphalt mat, UV breaks it down fast. We inspect the affected slope, replace the compromised shingles with compatible products, and verify the underlayment is still sound before we call it done.
• Tile cracking and slippage on CGI barrel tile profiles. Barrel tile roofs in neighborhoods like Lake Ida and Tropic Isle take a beating from summer storms and the occasional branch strike. The failure we see most is hairline cracking along the tile’s crown, followed by slight slippage as the fasteners corrode. We reset slipped tiles, replace cracked ones with matching profile tile, and re-secure the field with corrosion-resistant fasteners rated for coastal exposure.
• Metal pan fastener backout on CGI standing seam panels. On metal roofs near the Intracoastal, thermal expansion and contraction work fasteners loose over a decade or two. You’ll see a slight lift at the panel edges or hear a tick on hot afternoons. We re-torque or replace the fasteners, check the neoprene washers for UV breakdown, and re-seal the penetrations with a marine-grade sealant that holds up to salt air.
• Flashing separation at roof-to-wall transitions. This is the most common leak source on CGI roofs across all product lines. The flashing at dormers, chimneys, and side walls loses its seal over time, and water wicks into the gap. We remove the old sealant completely, inspect the flashing for corrosion, and re-bed it properly. A bead of caulk over old caulk is a temporary patch, and we won’t do that to you.
• Underlayment degradation beneath ridge caps. The ridge line takes direct sun all day in Delray Beach. On CGI shingle roofs over ten years old, the ridge cap underlayment can become brittle while the field shingles still look fine. This shows up as small stains on the ceiling near the roof peak. We lift the ridge caps, replace the degraded underlayment section, and re-install the caps with the correct exposure.

Our CGI Shingle, Tile & Metal Roofing Process

Every CGI roof job follows the same sequence, whether it’s a small repair or a full re-roof. We don’t skip steps, and we don’t surprise you at the end.

1. 1
   Call and schedule. A live person answers at (561) 940-2917. We schedule a free estimate at a time that works for you. No call center, no callback form.
2. 2
   On-site inspection. We walk the roof, check the roof deck from below when possible, and photograph everything we find. If there’s interior staining, we look at that too. We’re reading the roof the way Dale Kessler reads a rough opening: quietly, carefully, and without rushing to conclusions.
3. 3
   Written line-item quote. You get the scope, the materials, and the price on paper before any work starts. If there’s a parts decision, OEM versus quality aftermarket, we explain the difference and let you choose. If it is not in writing, it is not a guarantee, it is a conversation.
4. 4
   The work. Background-checked, uniformed technicians do the job. We protect your landscaping, we keep the site clean, and we work like we’re working on our own mother’s house.
5. 5
   Testing and verification. Every repair gets checked. Water test where a leak was involved, fastener check on metal, alignment check on tile. If the roof isn’t right, the job isn’t done.
6. 6
   Guarantee in writing. Before we leave, you get the Done Right Promise and the warranty documentation, both in writing, with durations stated.

What CGI Shingle, Tile & Metal Roofing Costs in Delray Beach

Straight answer: most repairs fall between $450 and $1,800. A full re-roof in Delray Beach runs $18,000 to $55,000 depending on the product line, the roof’s complexity, and the underlayment condition. Here’s how common scenarios break down.

• Shingle replacement, small area: $450 to $1,200
• Tile reset and replacement, small area: $600 to $1,800
• Metal panel fastener and sealant repair: $500 to $1,400
• Flashing repair or replacement at one transition: $550 to $1,500
• Ridge cap underlayment repair: $700 to $1,800
• Full roof replacement (tile or metal): $22,000 to $55,000
• Full roof replacement (shingle): $18,000 to $38,000

The biggest variables are roof pitch, access, the condition of the existing underlayment, and whether we find hidden damage once the old material comes off. We price fixed, and what we quote is what you pay. Call (561) 940-2917 for a free estimate, and we’ll walk the roof with you.

Why Delray Beach Homeowners Call TruePane Windows & Doors for CGI Work

We’ve been serving Delray Beach and the surrounding communities since 2008 through a heritage of craft and community commitment. Dale Kessler grew up in Lake Ida, spent his early years watching his father repair storefronts along Atlantic Avenue, and started TruePane in 2008 because out-of-true installs and voided warranties were problems worth fixing permanently.

We’re an authorized installer for more than a dozen manufacturer lines, including PGT, CWS, ES Windows, and ECO Window Systems, alongside our CGI service work. That matters because when a CGI roof job reveals a related window or door issue, we can handle it without bringing in another contractor. One crew, one standard, one promise: if it’s not done right, we make it right. No paperwork fights, no fine print that covers neither. Call (561) 940-2917 and a live person answers, 24 hours a day, 7 days a week.

FAQs