CGI Impact Garage Doors Nationwide | TruePane Windows & Doors

CGI Impact Garage Doors in Delray Beach: What to Know First

CGI impact garage doors in Delray Beach typically cost between $2,800 and $6,500 installed, depending on the door’s wind-load rating, size, and whether the track and hardware need replacement as well. We complete most CGI garage door replacements in one to two days, and we are an independent CGI service provider, not a factory branch, which means we make repair and replacement decisions based on what actually serves your house, not what clears a corporate parts counter. If you own a CGI door that is binding, rattling in wind, or showing rust around the bottom panel, this page tells you what is actually going on and what it should cost to fix it right. Call (561) 940-2917 and a live person answers, day or night.

Call (561) 940-2917

How CGI Products Fail - and How We Fix Them

CGI builds a stout door, and we have installed and serviced enough of them across Delray Beach to know exactly where they give out under our salt air and hurricane seasons. The failures are rarely the panel itself. They are predictable, fixable, and worth understanding before you write a check.

• Bottom panel rust-through on the 1000 and 2000 series. We see this most often on homes east of Federal Highway and anywhere within a mile of the Intracoastal. The bottom panel is where salt spray collects and where the door’s weep holes clog with sand and leaf litter from Delray’s oak canopy. CGI’s factory finish is durable, but once the galvanized skin is scratched, the coastal air does the rest. We replace the panel, recoat the seam, and set the weep holes to drain properly again.
• Roller stem wear causing the door to jam halfway up. CGI doors run heavy, which puts real load on the roller stems and hinges. When a homeowner says the door “binds” or “groans” on the right side, it is almost always a worn roller stem or an egged-out hinge barrel. We replace those with heavy-gauge aftermarket stems, not the light OEM rollers, when the door is out of factory warranty. It lasts longer in Delray’s humidity.
• Wind-load code mismatch on older 1100 series doors. A homeowner in Lake Ida called us last year after buying a house and learning the garage door was rated for 140 mph when the current code for his wind zone requires 160. The door was structurally fine. The paperwork was not. We verify the pressure rating label on every CGI door we touch and tell you, in writing, whether your door meets current Delray Beach code or needs to be upgraded before the next storm season.
• Track misalignment after settling. Delray Beach sits on sandy soil, and slabs shift. A quarter-inch of movement at the foundation turns into a door that scrapes the track or sits cockeyed in the opening. We see this on CGI doors in neighborhoods from Seagate to Rainberry Bay. The fix is not lubing the track. The fix is re-shimming and re-hanging the track so the door rides square again.
• Frayed torsion cables on high-cycle use. If you open and close your CGI door more than three times a day, the cables wear faster than the springs do. A frayed cable is a loaded gun. We replace both cables as a set, inspect the drum and spring, and advise against doing this work yourself. The torsion on a CGI impact door is enough to take off fingers.

A note on parts: When a CGI door is under factory warranty, we use OEM components exclusively. Warranty claims fail on aftermarket parts, and we do not gamble with your coverage. When the warranty has lapsed, we give you a written side-by-side: OEM price and the quality aftermarket alternative, with the tradeoffs stated plainly. You decide. We document everything.

Our CGI Impact Garage Doors Process

We do not sell a door over the phone, and we do not hand you a brochure and ask you to trust us. Here is how a CGI job goes at TruePane Windows & Doors.

1. 1
   You call. A live person answers, asks what the door is doing, and schedules a visit. No voicemail tree, no callback form.
2. 2
   We inspect. Our tech measures the opening twice, checks the pressure rating label, reads the track alignment, and looks at the foundation line. Dale Kessler grew up in Lake Ida and reads a rough opening the way some people read a room: quietly, carefully.
3. 3
   We quote on paper. Repair versus replace, OEM versus aftermarket, every line item broken out. If it is not in writing, it is not a guarantee, it is a conversation.
4. 4
   We do the work. Background-checked, uniformed technicians remove the old door, set the new one square, and torque every fastener to manufacturer spec. The truck does not leave until the door cycles twice without a hitch.
5. 5
   We register the warranty. Both manufacturer layers, registered in writing, durations stated, before the truck leaves your driveway. That is The Keystone Standard.
6. 6
   You get 90 days. If the door is not done right, we make it right. No paperwork, no arguing.

What CGI Impact Garage Doors Cost in Delray Beach

Here is what we charge for the CGI jobs we actually do in Delray Beach, not a national average pulled off the internet.

• Full CGI impact-rated door replacement, single-car: $2,800 to $4,200 installed, including track and hardware. Higher wind-load ratings push toward the top of that range.
• Full replacement, double-car: $4,200 to $6,500 installed. This is the most common job we do in neighborhoods like Tropic Isle and St. Andrews.
• Bottom panel replacement: $600 to $1,100 depending on the series and whether the panel is still in production. Older 1000 series panels sometimes need to be fabricated.
• Roller, hinge, and stem rebuild (both sides): $280 to $520. This fixes the jamming and groaning on most doors that are otherwise sound.
• Track re-shim and re-hang: $350 to $700 depending on how far the slab has moved and how many shim points are needed.

What moves the price: wind-load rating, door width, whether the opener needs reprogramming or replacement, and how much of the existing track can be kept. Call (561) 940-2917 and we will give you a free estimate with every number in writing before you commit to anything.

Why Delray Beach Homeowners Call TruePane Windows & Doors for CGI Work

We are a local company, founded in 2008 by second-generation glazier Dale Kessler, with years of craft heritage in this community. When a CGI door fails, we send a uniformed, background-checked technician who has done this exact repair on this exact door line, not a rotating crew. If a CGI replacement is not the right call, we are honest about it, and we can quote you PGT, CWS, ES Windows, and ECO Window Systems side by side so you see exactly what each dollar buys. Every job carries the Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before the truck leaves your driveway. We stand behind it.

FAQs