Simonton Custom Windows & Doors Nationwide | TruePane Windows & Doors

Simonton Custom Windows & Doors in Delray Beach: What to Know First

We install, replace, and rework Simonton custom windows and doors throughout Delray Beach, typically turning around a window job in one visit when parts are on the truck and a door job inside a week when a panel has to be ordered. We are an independent service provider, not a factory-authorized shop, which means our recommendation is based on what holds up in the salt-and-humidity reality of a Delray Beach home, not on moving a particular SKU.

Call (561) 940-2917

If you own a Simonton window or door that is fogged, binding, leaking, or just never fit the opening right, this page tells you what is actually wrong with it and what it will cost to make it right. Call (561) 940-2917 and you will get a person, not a recording.

How Simonton Products Fail - and How We Fix Them

Simonton makes a respectable mid-tier vinyl and aluminum product. Their Reflections, DaylightMax, and StormBreaker lines appear all over Palm Beach County, and we have worked on enough of them to know what goes wrong and what does not. Here are the failures we see repeatedly here in Delray Beach:

• Fogged insulated glass on Reflections 5500 and 6500 sliders. Simonton’s double-pane units have a history of seal failure along the bottom edge where the spacer meets the glass. In Delray Beach’s humidity, the argon leaks out and moisture creeps in, leaving a permanent haze you cannot wipe away. We replace the IGU with a new sealed unit and reset the sash so the drain channels actually drain.
• Roller failure on DaylightMax patio doors. The factory rollers on this line are small and sit on stainless tracks that corrode from the salt air. We regularly extract Simonton doors in Delray Beach where the roller has seized and the door is opening on the lock rails, leaving a gouge in the vinyl. Our fix is a quality aftermarket roller with a larger wheel diameter, set to the right door weight, not the cheapest OEM roller that will fail the same way in five years.
• Frame sealant shrinkage around custom shape windows. Simonton’s specialty shapes - circles, half-rounds, trapezoids - are assembled at the factory and rely on an internal sealant bead. After eight or nine years in South Florida heat, that bead shrinks and the corners weep. We rebuild corner joints with a marine-grade sealant that will not shrink and crack like the factory caulk.
• Clogged weep holes on StormBreaker impact windows. These windows have weep channels that are supposed to drain rainwater but are easy to block with construction debris or our fine Delray Beach sand. Once they are plugged, you get a waterfall inside your wall on a hard rain. We rout the weeps clear, flush the sill track, and check the slope so water goes outside the frame, not underneath it.
• Warped vinyl frames on west-facing Reflections windows. Vinyl expands and contracts, and on a western exposure in Delray Beach - think the afternoon sun off Lake Ida or the golf course - we see upper sash frames bow enough to let air through at the meeting rail. We straighten the sash with heat, add steel reinforcement where the extrusion allows it, and rebalance the springs so the window closes true.

Our Simonton Custom Windows & Doors Process

We do not service a Simonton window by guessing at it. Here is the exact play we run:

1. 1
   You call, a person picks up. Our Delray Beach office is answered live, day or night. We book the appointment and tell you who is coming and when.
2. 2
   We measure - twice. Our tech reads the rough opening, the existing frame, and the glass, and writes down the dimensions before he touches a screw. If one measurement is out a quarter-inch, we will catch it now and tell you, not after the window is ordered.
3. 3
   Parts decision on paper. We quote both OEM and quality aftermarket options, in writing, so you see exactly what you are buying for your Simonton. Where an OEM part is the safer call, we say so. Where aftermarket is better, we show you why.
4. 4
   The work gets done. We remove the old sash, glass unit, or track, clean out the sill, reflash the opening if it needs it, and set the new piece square and true.
5. 5
   We test before we leave. The window is run open and shut a dozen times, the door gets a full travel check, and the seal is checked with a moisture meter. If it does not pass, it does not leave the truck.
6. 6
   You get the promise in writing. Our Done Right Promise goes on the invoice: if it is not done right, we make it right, no paperwork and no arguing.

What Simonton Custom Windows & Doors Cost in Delray Beach

Here at TruePane, we do not play the low-ball and change-order game. These are honest numbers for the most common Simonton repairs and replacements we perform in Delray Beach.

• Fogged IGU replacement on a Reflections double-hung: $280-$480 per pane, all labor and haul included.
• Full patio door roller replacement with aftermarket hardware: $180-$340, depending on door weight and track condition.
• Custom shape window (half-round, trapezoid, ellipse) reglazed and refitted: $320-$650 each, with new setting blocks.
• Complete Simonton window replacement, including framing and trim where needed: $620-$1,200 per opening, depending on size and whether impact glass is required.
• Simonton door slab replacement - keeping the existing frame if it is square: $490-$900 per slab, hung and sealed.

What moves the price is glass thickness, impact-rating requirements under Florida code, the size of the opening, and whether the frame has water damage we have to cut out and rebuild. We will never leave you with a surprise line item. Call (561) 940-2917 and we will quote your job on paper, side by side, before we touch a thing. The estimate is free.

Why Delray Beach Homeowners Call TruePane Windows & Doors for Simonton Work

We have been doing this in Delray Beach since 2008, which means we have been back to fix work other shops left behind and seen how it fails when shortcuts are taken. That is why we put both warranty layers in writing - yours and the manufacturer’s - before our truck leaves your driveway. Dale Kessler started this shop in 2008 because he was tired of seeing out-of-true installs and voided warranties in the very neighborhood he grew up in, and it still runs on that principle.

Our techs are background-checked, uniformed, and trained by us on every brand we service, including Andersen, Pella, and PGT, so if your Simonton cannot be saved economically, we do not have to hand you a brochure and leave. We can put a comparable product side by side on paper, today. We will be there when we say, and we stand behind the work in writing.

FAQs