Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterSimonton Window Installation in Delray Beach: What to Know First
Simonton window installation in Delray Beach typically runs $850 to $2,400 per opening depending on the series, glass package, and whether the existing frame can be reused. Most single-opening installs take one day, and we schedule within five to seven business days. We are an independent service provider, not a factory-authorized installer, which means we quote the work honestly and register your warranty paperwork before the truck leaves your driveway.
This page is for the homeowner who already owns Simonton windows, or has been quoted Simonton replacements, and wants to know exactly what the installation involves before anyone picks up a pry bar. If you’d rather just talk it through, call (561) 940-2917 and a live person answers.
How Simonton Products Fail - and How We Fix Them
Simonton builds a solid mid-range window, but after a decade or two in Delray Beach heat and salt air, certain failure patterns show up more than others. Here is what we actually see on job sites:
- Reflections 5500 balance shoe fatigue. The Reflections line uses a vinyl balance shoe inside the jamb. After 8 to 12 years, the shoe cracks and the sash drops hard when opened. The window is not worn out, the shoe is. We replace the shoe and spring rather than the entire sash, which saves hundreds per opening.
- Impressions 9800 sill corner leaks. The Impressions series has a welded sill with corner welds that can separate just enough to let wind-driven rain through during summer storms. You won’t see a crack, you’ll see a water stain on the interior sill after a hard east wind. We pull the window, re-weld or seal the corner, reset the unit, and retest with a hose before we call it done.
- Dayside seal failure on South and West exposures. Any insulated glass unit in Delray Beach takes punishment, but Simonton’s standard double-pane units on south-facing walls often fog between 10 and 14 years. The glazing bead on many Simonton lines is removable, which means we can reglaze the sash with new glass instead of replacing the whole window. That is usually 40 to 50 percent cheaper than a full replacement.
- Cam lock and keeper misalignment on slider series. Simonton sliders use a cam-style lock that drifts out of alignment as the rollers wear. Homeowners assume the lock is broken and replace it. The real fix is adjusting or replacing the rollers so the sash sits true, then the original lock engages correctly. We check the rollers first, because that is where the problem lives roughly eight times out of ten.
- Frame racking from settling in older Delray Beach neighborhoods. Homes in Lake Ida, Osceola Park, and Seacrest built before 1980 settle enough to rack window openings. Simonton frames are rigid vinyl, and a racked opening binds the sash. We do not force the window into a bad opening. We shim and square the rough opening, install a properly sized unit, and the sash glides. That is the difference between a window that works for five years and one that works for twenty.
Our Simonton Window Installation Process
Every Simonton job follows the same sequence, whether we are replacing one window or resizing twelve of them. Dale Kessler grew up in Lake Ida, and he taught us to measure every opening twice before we touch a fastener. Here is how it goes:
- 1
The call. You reach a live person at (561) 940-2917. We talk through the symptom, the window location, and what you have already tried. Then we schedule a site visit.
- 2
The measure and diagnosis. A technician measures the rough opening, checks the existing frame for square and level, and identifies the exact failure mode. On Simonton work, we check the balance system, the sill corners, and the glass seal, not just the obvious symptom.
- 3
The written quote. We put the line items on paper, side by side where a comparison makes sense: OEM Simonton parts versus quality aftermarket, new construction flange versus retrofit frame. You see the price before you decide. If it is not in writing, it is not a guarantee, it is a conversation.
- 4
The install. We remove the old window without wrecking the opening, prep and flash the frame for South Florida storm exposure, set the new or rebuilt unit, shim it true, and seal it. Uniformed, background-checked technicians, every visit.
- 5
The test and cleanup. We operate the window through its full range, check for air and water infiltration, and make sure the sash sits true in the frame. Then we clean the job site and walk you through what we did.
- 6
The warranty registration. Both manufacturer warranty layers get registered in writing, with durations stated, before we leave. The Done Right Promise covers the workmanship. No paperwork fights, no arguing.
What Simonton Window Installation Costs in Delray Beach
Window installation pricing in Delray Beach depends more on the condition of the opening than the brand of the window. With Simonton, most homeowners fall into one of these ranges:
- Single window install (labor only, customer-supplied window): $350 to $750
- Full replacement of a standard Simonton double hung, installed: $850 to $1,400 per opening
- Impact-rated Simonton unit installed in a retrofit frame: $1,200 to $2,200 per opening
- Reglaze a fogged Simonton sash with new glass: $250 to $500 per sash
- Balance shoe or roller repair on one window: $180 to $325
What moves the price: whether the opening needs resizing, whether the home requires code-mandated impact glazing, whether we are pulling a permit, and whether the existing frame is square enough to reuse. We give you the number before the work starts, and it does not change when the bill arrives. Call (561) 940-2917 for a free estimate written in plain English.
Why Delray Beach Homeowners Call TruePane Windows & Doors for Simonton Work
TruePane Windows & Doors has been serving Delray Beach and the surrounding communities since 2008 through a craft tradition that started with Dale Kessler’s father repairing storefronts along Atlantic Avenue. We treat every Simonton window the same way we treat every window: measure the opening twice, set the pane true, register the warranty in writing, and stand behind the work. If the pane is not true, the job is not done. That is the rule that names the company.
We are an authorized installer for more than a dozen manufacturer lines, including, PGT. That matters because it means we are not married to one brand. If a Simonton repair does not make sense and a different product fits your opening, your budget, and your long-term plans better, we will tell you straight. We quote manufacturer lines side by side on paper and let you decide. And when you call, a live person picks up the phone, 24 hours a day, seven days a week.
FAQs
In most cases, yes. Simonton’s warranty covers manufacturing defects, but improper installation is explicitly excluded, and a botched install can shift the frame enough to void the glass seal warranty too. We register both warranty layers in writing on every job we install. Call (561) 940-2917 if you want to confirm coverage before any work happens, estimates are free.
Look at the glass seal, the operation of the sash, and the condition of the frame. Fogged glass, a sash that drops or binds, and rotted or racked framing each point a different direction. A fogged Simonton unit with a removable glazing bead can usually be reglazed for a fraction of replacement cost. A frame that has twisted out of square in a settling house usually means replacement with a properly shimmed new unit. We diagnose the specific failure before we quote anything.
Most single-opening installs are completed the same day we start, typically four to six hours from setup to cleanup. A full-house replacement of ten or more windows usually runs two to three days depending on access and weather. When we schedule, we will be there when we say.
For balance systems and locks, yes, the OEM part fits the Simonton jamb profile exactly and that matters for smooth operation. For glass, there is no such thing as Simonton glass. They source insulated units from the same regional glass fabricators we use, so a quality aftermarket unit with the same Low-E coating and argon fill performs identically. We will show you both prices on paper and you decide.
It will not. The quote we give you after the measure and diagnosis is the number on the final bill. If we open the wall and find something no one could have seen from the outside, we stop work and we talk about it before we spend another dollar. No surprise line items, ever. Call (561) 940-2917 and we will walk you through exactly what to expect.
Written by Dale Kessler, Owner, TruePane Windows & Doors, serving Delray Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.