Andersen Custom Windows & Doors Nationwide | TruePane Windows & Doors

Andersen Custom Windows & Doors in Delray Beach: What to Know First

If you own Andersen windows or doors in Delray Beach and they need custom work, the short answer is this: we repair and replace them as an independent Andersen service provider, and most jobs are done in a single visit. We quote the work honestly, line by line, before anything gets ordered. Custom Andersen work in Delray Beach typically runs from $250 for a hardware repair up to $4,500 or more for a fully custom replacement window or door with impact glass, depending on size, series, and glass package.

Call (561) 940-2917

This page is for Delray Beach homeowners who have Andersen products that are fogged, binding, leaking, or simply tired after years of salt air and sun. If that sounds like your house, call (561) 940-2917 and we’ll walk you through what needs to happen. Dale Kessler, our founder, spent his whole life in this trade, and he’ll be the first to tell you a window problem is rarely as simple as it looks from the living room.

Key Takeaways

• We service and install all Andersen lines, including the 400 Series, 200 Series, A-Series, and the older Narroline and Perma-Shield units still common in Delray Beach homes.
• Independent provider status means we are not bound to Andersen’s corporate repair network or scheduling. We fix it on our timeline, not theirs.
• Every job, including Andersen custom work, is covered by our Done Right Promise and The Keystone Standard.
• A live person answers our phone 24/7. No voicemail tree, no call center.

How Andersen Products Fail - and How We Fix Them

Andersen makes a decent window. But after twenty or thirty years in Delray Beach, even decent windows have their weak points. Here is what we actually see in the field.

• Fogged glass in 400 Series Tilt-Wash double-hungs. The 400 Series was Andersen’s bread-and-butter for decades, and the Tilt-Wash design is still in thousands of Delray Beach homes. When the glass fogs, it is almost always a failed seal between the panes, not the sash itself. We replace the insulated glass unit, not the whole window, saving you hundreds over a full replacement.
• Binding sashes in 200 Series Perma-Shield gliders. The 200 Series is a vinyl-clad window, and after ten-plus years of South Florida humidity, the frame can flex slightly, causing the sash to bind in the track. We re-true the frame, adjust the rollers or glides, and in severe cases rebuild the sill. This is a classic, and it is one most homeowners blame on age when the real cause is installation or settling.
• Failed weatherstripping on A-Series casements. The A-Series is Andersen’s premium wood line, and the casement versions rely heavily on compression weatherstripping for air and water sealing. That material dries out and shrinks in our heat, leaving you with drafts and occasional water intrusion on the windward side. We replace the weatherstripping with the correct profile for the year and series of your window, which matters more than most people think.
• Fogged or delaminated glass in older Narroline units. The Narroline is out of production, but Delray Beach is full of them. The glass units in those windows often fail in a way newer Andersen models do not: the desiccant inside the spacer absorbs moisture until it saturates, and then the fog starts. Once that happens, no cleaning will fix it. We source replacement glass packs from specialty suppliers who still fabricate for discontinued Andersen lines.
• Warped or sagging patio door panels in Andersen gliding doors. The Andersen gliding door line, from the early Perma-Shield models to the newer A-Series, can develop a sag over time, especially on wide openings. The roller assemblies wear unevenly, and the door rides lower on one side, dragging on the track. We adjust or replace the rollers, shim the door back to plumb, and replace the track if it is worn through. Done right, the door works like new without a full-frame replacement.

Our Andersen Custom Windows & Doors Process

We do not wing it on a job like this. Here is how a typical Andersen custom window or door job runs with TruePane.

1. 1
   Call and scheduling. You call (561) 940-2917. A live person answers, every time, day or night. We set a time and date, and we show up when we say we will.
2. 2
   On-site measurement and diagnosis. A uniformed, background-checked tech measures every opening twice. We inspect the existing frame, the glass, the hardware, and the installation to figure out what actually failed and why.
3. 3
   Written quote with side-by-side options. We write up the repair or replacement quote on paper, including OEM Andersen parts and quality aftermarket options where they make sense. You see the numbers for each, not just a single number you have to take on faith.
4. 4
   Parts ordering and scheduling. If parts need to be ordered, we place the order while we are at your house and give you a date for the work. No second appointment left hanging, no surprise line items later.
5. 5
   Installation or repair. Our techs do the work, clean up, and test everything before they call it finished. The founding rule around here is: if the pane is not true, the job is not done.
6. 6
   Warranty registration. Before the truck leaves your driveway, we register both warranty layers in writing, with durations stated. That is The Keystone Standard, and it applies to every job we do.

What Andersen Custom Windows & Doors Costs in Delray Beach

Honest numbers are the only numbers worth giving. Here are the ranges we see for Andersen work in Delray Beach right now.

What moves the price: glass package (clear, low-E, impact), opening size, frame condition, and whether we are repairing or replacing the whole unit. Custom shapes always cost more than stock rectangles, and oversized glass panels add handling and freight. You will get a fixed, line-item price before any work begins. Call (561) 940-2917 for a free estimate on your specific job.

Why Delray Beach Homeowners Call TruePane Windows & Doors for Andersen Work

We have been doing this in South Florida since 2008, and Dale Kessler started TruePane in 2008 for a simple reason: too many homeowners were getting windows installed out of true and warranties that evaporated when the contractor did. We do not play that game. Every job is covered by our Done Right Promise, and every warranty layer gets registered in writing before we leave. If it is not in writing, it is not a guarantee - it is a conversation.

Our techs spend their days working on Andersen products, but we also install and service Pella, PGT, and CGI when the job calls for it. That matters because it means we are not married to one brand when a repair is not the right call. We tell you the truth, show you the numbers, and let you decide. We plan to be in Delray Beach thirty years from now, answering the same phone number, standing behind the same work.

FAQs