Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Windows & Doors in Golf, FL | TruePane Windows & Doors
We’re TruePane Windows & Doors, and we provide independent CWS service across Golf, Florida. We are not affiliated with or authorized by CWS, but our technicians are factory-trained on their architectural window and door systems. What sets our CWS work apart in Golf is simple: we know the county permit process and the village’s architectural review standards, so your replacement clears both without delay. Call (561) 940-2917 for a free estimate.
Why Golf Residents Choose Us for CWS Service
Golf is a village of fewer than 300 residents, and word travels fast when a contractor underperforms. We’ve built our reputation here the slow way, one CWS casement and one sliding door at a time. Dale Kessler started TruePane in 2008 after spending two decades working through every window type the South Florida climate can punish. He grew up in Delray Beach’s Lake Ida neighborhood and learned glazing fundamentals at Palm Beach State College. That background means we approach CWS units the way a surgeon approaches a familiar procedure: we know the failure points before we arrive.
We also know Golf’s housing stock. These are large custom homes built mostly between the 1960s and 1990s, with oversized openings you won’t find in a track development. CWS units in these houses rarely accept off-the-shelf replacements. We measure every opening twice and quote the correct specialty-order unit the first time. Learn more about our CWS sales & service approach.
Common CWS Windows & Doors Problems We Solve in Golf
- Fogging between panes on CWS 7700 Series casements. The butyl seal on dual-pane insulated glass fails over time, and Golf’s persistent humidity accelerates it. We see this constantly in homes along Golf Road. We replace the sash or the glass unit with OEM matching bronze or white finish, not whatever happens to be in stock.
- Corrosion and pitting on CWS 400 Series single hung frames. Salt-laden coastal air attacks the factory finish on beachside units. The bottom rail corners usually go first. We strip, treat, and refinish where possible, or replace the frame section entirely when the pitting has compromised the aluminum.
- Sticking or misaligned panels on CWS 5000 Series sliders. Rollers wear out, tracks fill with sand and salt grime, and the panel starts binding or leaving a gap at the corner. We rebuild the roller assembly, clean and re-true the track, and reset the panel so it closes flush.
- Degraded weatherstripping on CWS fixed windows. Those architectural fixed windows with golf-course views run 15 or 20 feet in some Golf homes. When the weatherstripping breaks down, air leaks through and your AC bill climbs. We replace the gasketing with material rated for Palm Beach County humidity and UV.
- Sash sag on CWS 7700 casements with worn hinges. Stainless steel hinges eventually wear, especially on larger units. The sash drops, the lock misaligns, and the window won’t seal. We reset or replace the hinge and re-align the operator mechanism.
CWS Service in Golf: What Local Conditions Mean for Your Equipment
Here’s what makes Golf different from every neighboring city: there is no municipal building department. All permits run through Palm Beach County’s system, and the county’s Florida Product Approval lookup is where contractors who don’t know better get stuck. They file the wrong product approval number, or they submit a window that doesn’t meet the design-pressure rating for this wind zone, and the job stalls for weeks. Golf homeowners don’t tolerate stalls. We pull county permits before we order anything, verify the product approval against the exact model and size, and confirm it clears the village’s architectural review standards before the truck rolls. It’s the same reason we coordinate with the Golf Property Owners’ Association on nearly every replacement. That extra step prevents a finished job from getting flagged later, which in Golf can mean undoing the work entirely.
We serviced a CWS 7700 casement in a custom home off Golf Road where the homeowner reported visible fogging and a slight sash sag. Our tech found the dual-pane seal had failed from years of humidity, and the stainless steel hinge was worn. We ordered an OEM replacement sash with impact-rated glass matching the original bronze finish, then reset the hinge and re-caulked the perimeter. The window now operates smoothly and the fog is gone, with county product approval documentation provided for the HOA.
CWS Models & Products We Service in Golf
We service the full CWS line: 7700 Series casements, 400 Series single hung windows, 5000 Series sliding glass doors, and architectural fixed windows, through our Door Installation in Golf. We source OEM CWS parts whenever they remain available and match the original glazing and hardware to preserve both performance and the architectural look Golf homeowners expect. When OEM is discontinued or the price doesn’t make sense, we offer quality aftermarket equivalents and give you an honest repair-versus-replace estimate before any work begins. If it is not in writing, it is not a guarantee, it is a conversation. Everything is written down, signed, and priced before we start.
CWS Service Pricing in Golf
What you pay depends on what’s actually wrong. A failed seal on a 7700 casement runs differently than a corroded 400 series frame or a worn 5000 slider roller assembly. You’re looking at a range from around $300 for a straightforward hardware rebuild to several thousand for full frame replacement on a custom oversized opening. The factors: whether we can source OEM or need a specialty order, whether the unit is impact-rated, and whether the opening is standard or custom, which most Golf homes are. Our estimates are free and line-itemed on paper, with both warranty layers registered in writing under The Keystone Standard. No surprises on the bill. Call (561) 940-2917 for an exact quote on your CWS units.
Serving Golf, FL - Our Local Coverage Area
We’re based in the Golf area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Golf
In most cases we can replace the insulated glass unit alone if the frame and sash are structurally sound. If the hinge has worn and caused sash sag, or if the frame shows corrosion, we’ll recommend a replacement sash with matching finish. We’ll show you the options on paper before any work starts. Call (561) 940-2917 for a free assessment.
Yes, we handle the full permit submittal and product approval verification. Golf has no local building department, so everything runs through Palm Beach County, and we also coordinate with the Golf Property Owners’ Association when architectural review applies. We don’t start work until the paperwork clears.
Almost always. The typical cause on a 5000 series slider is worn rollers plus accumulated sand and salt grime in the track. We rebuild the roller assembly, clean and true the track, and reset the panel. Most of these repairs take one visit. Call (561) 940-2917 and we’ll give you a written estimate.
Sometimes. If the aluminum frame is sound and the opening depth allows it, we can install new impact-rated laminated glass into the original CWS frame. If corrosion or structural issues are present, full frame replacement is the honest answer. We’ll tell you which one applies to your window before you spend a dollar.
OEM CWS parts typically run two to six weeks depending on the model and finish. We maintain relationships with multiple parts distributors across Palm Beach County and can often locate stock faster than factory-direct ordering. For common failure items like hinges, locks, and weatherstripping, we keep inventory on hand. Call (561) 940-2917 and we’ll check availability for your exact part while you’re on the phone.
Service Areas Near Golf
We serve Golf and the surrounding coastal communities including Delray Beach, Gulf Stream, Ocean Ridge, and Boynton Beach. If you need CWS service in Delray Beach or CWS service in Gulf Stream, we cover those areas with the same factory-trained technicians and written warranty registration. See our full Golf service area for details.
Book Your CWS Service in Golf Today
If your CWS windows or doors are fogged, corroded, sticking, or leaking, call (561) 940-2917. We’ll schedule a free estimate, measure the openings accurately, and give you a written line-item quote. A live person answers the phone 24 hours a day. We’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Golf since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.