Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Golf
Window installation in Golf, FL runs from about $900 per opening for a standard vinyl single hung to $4,800 or more for a large impact-rated casement on a custom home, and most full-home replacements in the village land between $28,000 and $85,000 depending on product line and structural conditions. That’s the honest range we quote, because Golf is not a tract-home market and its houses rarely accept stock sizes. TruePane handles the entire process: county permits, architectural committee submittals, product approvals, installation, and both warranty registrations in writing. If you’re planning window work in Golf, call (561) 940-2917 and we’ll walk the house with you, measure every rough opening twice, and put a written quote in your hands that you can compare line by line.
We know this village because we work here. We understand that a window replacement on Leewood Lane or Barwick Road has to satisfy two masters: Palm Beach County’s wind-zone code and Golf’s own architectural review standards, which are stricter than the county in ways that matter to your approval timeline. Our crews schedule around that reality every month. You won’t get a call from us saying the windows are six weeks out and the openings are boarded.
Key Takeaways:
- Full-home window installation in Golf typically runs $28,000-$85,000; single openings run $900-$4,800.
- Both Palm Beach County permits and Golf’s architectural committee review are required on most replacements.
- TruePane files both submittal packets for you and sequences the work around committee approval dates.
- A live person answers our phone 24/7 at (561) 940-2917. No voicemail tree.
Why TruePane Windows & Doors Is Golf’s Preferred Window Installation Company
Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. That standard matters more in Golf than almost anywhere else we work. The homes here were built between the 1960s and 1990s with openings that were never standardized. A crew that shows up with stock sliders and a caulk gun is going to fail on this housing stock. We don’t.
We carry years of glazing heritage into every Golf job, from a single garden window to a whole-house impact replacement. Our technicians are background-checked, uniformed, and trained as apprentices into journeymen under Dale’s craft standard. When we quote Andersen, Pella, or Marvin, we quote the actual manufacturer line on paper, side by side, so you see exactly what you’re buying and what each product costs before you commit. We register both manufacturer warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard. Every Golf job is also covered by our Done Right Promise: if the install isn’t right, we make it right, with no paperwork fight.
Golf homeowners call us because we’ve already done the homework on what this village requires. We’ve sat through architectural committee reviews on Golf Road and Country Club Drive. We know that a submittal packet missing a Florida Product Approval number gets bounced the first time, every time. We build that into the schedule so you don’t pay for a second trip or a delayed manufacturer order.
Our Window Installation Services in Golf
We install full lines of Window Installation products in Golf, and we stock replacement parts locally for the brands most common in this market. These four categories cover most of the work we do in the village:
Casement Windows
Casement windows are the most common replacement we handle in Golf’s custom homes, particularly where original 1970s and 1980s aluminum frames have corroded from salt-laden humidity. A crank-operated casement gives you full ventilation and a tight seal when closed, which matters in a coastal plain where afternoon sea breezes carry salt. We install impact-rated casements from Andersen, Pella, and Marvin that meet Palm Beach County’s design-pressure requirements and still carry the architectural profiles Golf’s committee expects to see.
Awning Windows
Awning windows hinge at the top and open outward, which is why Golf homeowners favor them in bathrooms, kitchens, and low wall openings where privacy and rain protection matter. They seal tightly against driving rain, a real consideration in this part of Palm Beach County. If your existing awning units have fogged seals or pitted frames, we can replace them with impact-rated units that clear the county’s product approval lookup without changing the sightlines of the home.
Fixed & Picture Windows
Golf’s custom homes often feature oversized fixed glass on garden-facing walls or over grand entry surrounds. These openings are rarely standard, and that’s where most contractors get into trouble. We measure every opening twice and order to the rough opening, not to a guess. For fixed windows in Golf, we commonly quote impact-rated insulated units with low-E glass and argon fill, sized for the specific wind zone the county assigns to the property. The architectural committee typically reviews muntin profiles and frame color on these units, and we handle that submittal as part of the job.
Single & Double Hung
Single and double hung windows remain popular in Golf’s older custom residences, especially where second-story openings require interior cleaning ease. The challenge in this village is that original hung windows from the 1960s through 1980s seldom match modern stock dimensions. We order to the opening, register both manufacturer warranty layers in writing, and install with the flashing detail the county inspector will actually check. If you’re replacing hung units in a Golf home, we’ll also verify the counterbalance hardware before we order, so you don’t end up with a sash that won’t stay up in a master bedroom facing Barwick Road.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Golf
TruePane is an authorized installer for more than a dozen manufacturer lines, and in Golf we quote most often because their impact-rated product lines span the design-pressure ranges this county’s wind-zone map requires. We also work with Milgard, Jeld-Wen, PGT, CGI, and ES Windows, so you can compare a PGT impact casement against a Marvin clad wood casement on the same page, not across two different sales pitches. Because we service these brands locally, warranty work moves faster: a Golf homeowner with a failed IGU in an Andersen casement doesn’t wait two weeks for an out-of-market technician. Dale’s rule applies to every line we carry: if the pane is not true, the job is not done.
Common Window Installation Problems We See in Golf Homes
- Sea-spalled aluminum frames: Salt-laden humidity from the Atlantic, barely two miles east, pits and corrodes aluminum frames within 15 to 20 years on homes that never see a hurricane. The extrusion weakens at the corners first, then the sash binds. Replacement requires full tear-out, not a sash swap.
- Non-standard rough openings: We replaced a series of casement windows in a Golf custom home whose 1970s openings were 6 inches wider than any stock Andersen or Pella size. Our techs pulled the county product-approval lookup, ordered impact-rated casements with argon fill and low-E glass, and worked the submittal packet with the village architectural committee so the new sash and jamb profiles matched the original bronze finish before a single flashing tape strip came off the roll.
- County permit rejection on missing FL product approval numbers: A replacement window can have the correct U-factor and fail permit review because the manufacturer’s Florida Product Approval number wasn’t listed on the submittal. Golf has no municipal building department, so all permits run through Palm Beach County. Contractors used to pulling in neighboring Palm Beach Gardens sometimes underestimate this step and cause costly delays.
- Architectural committee standstills: Starting tear-out before the village architectural committee approves the submittal packet leaves a luxury home with boarded openings for weeks while the committee debates muntin profiles. We sequence demolition after approval so that never happens on a TruePane job in Golf.
Pricing for Window Installation in Golf, FL
A single vinyl single hung replacement in Golf runs $900 to $1,600 installed. A mid-range impact-rated casement from Andersen or Pella lands between $1,800 and $3,400 per opening, depending on size and design pressure rating. Large fixed picture windows on custom openings start around $2,500 and can reach $6,000 or more once you add impact glazing, low-E coatings, and architectural-match frame finishes. Full-home replacements in Golf’s custom 1960s-1990s residences typically land between $28,000 and $85,000, with the spread driven by product line, opening count, and the extent of rotted or corroded frame repair beneath the old units. Material is the biggest variable. Architectural committee submittal and county permitting add roughly two to four weeks to the calendar, not to the invoice. We charge for the work we quote, and our quotes are written line items with manufacturer product numbers, not a single bottom line you have to trust.
Call (561) 940-2917 for an exact quote. The estimate is free, and we’ll walk every opening with you before we write a number.
We Also Serve Cities Near Golf
TruePane serves Window Installation in Golf and the surrounding Palm Beach County coastline, including Delray Beach, Gulf Stream, Ocean Ridge, and Manalapan. If you live just over the village line or own a second home in one of these neighboring communities, the same county permit rules and coastal wind-zone requirements apply, and we handle them the same way: measured twice, quoted on paper, installed to the standard.
Serving Golf, FL - Our Local Coverage Area
We’re based in the Golf area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Golf
Golf does not issue its own building permits. All window and door permits for Golf properties run through Palm Beach County’s building department. What Golf does require, on top of the county permit, is architectural committee review for most exterior changes, including window replacement. That means you need two approvals: the county permit, which hinges on Florida Product Approval numbers and design-pressure compliance, and the village committee’s sign-off on materials, colors, profiles, and sightlines. TruePane files both submittal packets. We don’t hand you a form and wish you luck. Call (561) 940-2917 and we’ll map the approval sequence for your specific home.
Every replacement window installed in Golf must carry a Florida Product Approval number that matches the exact unit being installed, including its design pressure rating for the county’s wind-zone mapping. Palm Beach County’s permit reviewers check the manufacturer’s approval number against the product listing, and they reject the submittal if the number is missing, stale, or for a different size than the unit on the quote. TruePane pulls the product-approval lookup during the estimate phase, not after the windows are ordered, and we list the approval numbers on your written quote so the county has nothing to bounce.
Golf’s architectural review typically adds two to four weeks to the window replacement timeline, assuming the submittal packet is complete the first time. The committee meets on its own schedule, and an incomplete packet can restart the clock. We submit the full packet up front: product photos, frame color samples, muntin profiles, glass types, and the Florida Product Approval numbers. For a typical whole-home replacement, plan on six to ten weeks from signed contract to completed install, with roughly a third of that time in review and permitting. For an exact timeline on your house, call (561) 940-2917 and we’ll lay it out by week.
In most Golf homes, yes, you can retain original wood sash and upgrade to impact glass, provided the existing frames are structurally sound and the glazing system meets Palm Beach County’s design-pressure requirements. We’ve done this on several custom residences where the committee wanted to preserve original millwork profiles. The work requires reglazing the sash with an impact-rated laminated glass unit and often reinforcing the frame joinery, which costs more than a full tear-out in some cases. We’ll quote both paths side by side so you can decide with numbers, not vague reassurances.
Because Golf’s custom openings almost never match stock sizes. A quote for a standard 36-by-60 slider in Delray Beach might ship in two weeks, while the same manufacturer needs six to eight weeks to build a casement or picture window to a 1970s Golf rough opening that’s six inches wider than any catalog size. Add county permit review and the village architectural committee’s calendar, and you’re looking at a longer total timeline than a neighbor in Gulf Stream without an HOA-style review. TruePane builds that reality into the quote so you aren’t told “two weeks” on the phone and handed a six-week truth after you’ve signed.
Call (561) 940-2917 to schedule a free estimate for window installation in Golf. We’ll measure every opening, pull the county product approvals, file the committee submittal, and install to the Keystone Standard. A live person answers, day or night.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Golf with window installation and replacement built to the standard he set in 2008: if the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.