Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Ocean Ridge
Impact window and door replacement in Ocean Ridge runs $85-$145 per square foot installed for most oceanfront-spec jobs, with whole-home packages on concrete block stucco homes typically landing between $38,000 and $72,000 depending on opening count and custom sizing. The difference between a bid on this side of the bridge and one from Delray Beach or Boynton Beach comes down to hardware spec: every opening on this barrier island needs marine-grade stainless or hot-dip galvanized components, period. TruePane has been installing impact-rated windows and doors along Ocean Ridge’s oceanfront and Intracoastal lots for years, and we quote the job correctly the first time. Call (561) 940-2917 for a free estimate that accounts for salt air, Exposure Category D wind loads, and Ocean Ridge’s inspection process.
Why TruePane Windows & Doors Is Ocean Ridge’s Preferred Impact Windows & Doors Company
Ocean Ridge homeowners have a specific set of expectations. The houses here are older, the salt exposure is relentless, and the town’s building department has seen enough botched window jobs to know exactly what to flag. Dale Kessler founded TruePane on a rule that still governs every install: if the pane is not true, the job is not done. That means we measure every rough opening twice, we specify stainless hardware where Ocean Ridge conditions demand it, and we don’t leave a job until the inspector signs off.
Our crews work Ocean Ridge regularly enough to know that a 1968 CBS home off Tropical Drive has different rough-opening realities than a 1990s rebuild near Old Ocean Boulevard. We don’t treat the town like a drive-by stop. Because Ocean Ridge is small and exclusively residential, word travels fast when a contractor argues with an inspector or leaves a homeowner with a fogged seal in July. We plan to be in town in thirty years, so we act like it.
Our Impact Windows & Doors Services in Ocean Ridge
Most Ocean Ridge homes need a combination of these four services. Start with a free walkthrough and we’ll give you a written line-item quote showing exactly which openings need what. No change orders, no surprise line items on the final bill.
Hurricane Impact Windows
Ocean Ridge’s older single-family homes, many built between the 1950s and 1980s, often still carry original single-pane aluminum windows or jalousie units that won’t pass a wind mitigation inspection. We replace them with impact-rated low-E casement, double-hung, or fixed units using fusion-welded frames and argon-filled insulated glass. On oceanfront and Intracoastal-facing elevations, we specify stainless steel hinges and hot-dip galvanized fasteners as the baseline, not an upgrade, because salt spray from both directions will pit standard zinc hardware in under five years.
Impact Sliding Glass Doors
The original aluminum sliding glass doors on many Ocean Ridge homes are the first things to fail. Frames corrode, rollers seize, and the tracks fill with salt-laden sand. We install impact-rated sliding doors with marine-grade stainless rollers, reinforced tracks, and laminated glass that meets Palm Beach County’s Exposure Category D requirements. If the existing rough opening is out of square, as many 1960s and 1970s CBS homes here are, we reface it rather than force a stock door into a bad opening.
Impact Entry & French Doors
A front entry door in Ocean Ridge takes Atlantic salt from the east and Intracoastal salt from the west, depending on the lot. Standard steel hinge pins and zinc-plated hardware won’t hold up. Our impact entry and French door installations use stainless hinges, marine-grade thresholds, and full-perimeter flashing tape at every jamb. We also quote manufacturer lines side by side, including Andersen, Pella, and Marvin, so you see exactly what the coastal-spec version costs compared to the standard inland spec.
Impact Garage Doors
Garage doors are the largest single opening on most Ocean Ridge homes, and hurricane codes treat them accordingly. A non-rated garage door that buckles in a storm pressurizes the house and blows the roof deck. We install impact-rated garage doors with reinforced tracks, stainless hardware, and heavy-gauge struts, and we coordinate the install with our window and door schedule so one inspection covers the whole scope.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ocean Ridge
TruePane is an authorized installer for more than a dozen manufacturer lines, including. That matters in Ocean Ridge because many of the town’s older homes have non-standard rough openings that big-box stock sizes simply don’t fit. When a custom-ordered Pella or Andersen unit is required, we handle the lead time, the mounting, and the warranty registration. Both manufacturer warranty layers get registered in writing before the truck leaves your driveway, and durations are stated on your paperwork. If anything is not done right, our Done Right Promise covers it. No paperwork fights, no arguing.
Common Impact Windows & Doors Problems We See in Ocean Ridge Homes
- Pitted aluminum frames and seized operators from dual-salt exposure. Because Ocean Ridge sits on a narrow barrier island with the Atlantic on one side and the Intracoastal on the other, every window and door gets hit by salt-laden air from both directions. Frames that would last 10-15 years just a few miles inland in Boynton Beach can pit and seize in under five years here.
- Reused corroded rough openings in 1960s and 1970s CBS homes. Contractors who try to save a buck by dropping a new impact unit into the original corroded aluminum channel end up with a window that sits out of square. The seal fails, water intrudes at the jamb, and the inspector flags it. We reface those openings correctly the first time.
- Stock-size impact windows that don’t fit non-standard old openings. Ocean Ridge’s mid-century housing stock has a large share of rough openings that are not standard sizes. Big-box stock units leave gaps that need shim packs and caulk that won’t hold. Custom-ordered units cost more upfront but seal correctly and last.
- Glass replacement on old aluminum frames. You cannot take a 1970s aluminum sliding glass door frame, drop impact-rated laminated glass into it, and call it code-compliant. The frame itself is not rated for impact or wind load. The whole assembly needs replacement with a rated unit and marine-grade hardware.
Pricing for Impact Windows & Doors in Ocean Ridge, FL
A typical impact window replacement in Ocean Ridge runs $85-$145 per square foot installed. A standard 36-by-60-inch impact casement or double-hung unit on a code-compliant opening runs $1,400-$2,200 per window including installation and stainless hardware. Impact sliding glass doors range $4,500-$12,000 depending on width, panel count, and whether the rough opening needs refacing. Impact entry doors run $3,800-$9,500 with marine-grade thresholds and stainless hinges. The oceanfront-spec version of any of these jobs carries a 20-35% premium over the inland-spec version, because stainless hardware, hot-dip galvanized fasteners, and marine-grade weatherstripping all cost more than standard zinc and aluminum. That premium is not optional here. The cheap spec corrodes in under five years and you pay for the job twice. Call (561) 940-2917 for a written line-item estimate. Estimates are free, and we stand behind every number we write down.
Note: homeowners 55 and older and veterans receive a permanent 5% discount on all work. We also offer a free written repair estimate and a maintenance check for existing windows and doors.
We Also Serve Cities Near Ocean Ridge
Our Impact Windows & Doors crews serve the entire coastal stretch of southern Palm Beach County. From Ocean Ridge we regularly run jobs in Delray Beach, Gulf Stream, Golf, and Manalapan. If you live anywhere on this barrier island chain, the salt-air spec is the same. Impact Windows & Doors in Ocean Ridge means marine-grade hardware and patience with non-standard openings, and that standard travels with us.
Serving Ocean Ridge, FL - Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Ocean Ridge
Because Ocean Ridge occupies the full width of a narrow Atlantic barrier island, homes here receive salt-laden air from both the Atlantic and the Intracoastal simultaneously. Standard zinc-plated window hardware and aluminum frame finishes that survive a decade in Boynton Beach pitting and seizing within five years here. Every opening, ocean-facing or Intracoastal-facing, sits inside the maximum coastal salt-air exposure zone. We specify stainless hinges, hot-dip galvanized fasteners, and marine-grade weatherstripping on every job because there is no inland-facing side of Ocean Ridge. For an exact quote on your specific openings, call (561) 940-2917 and we’ll walk the property with you.
No. The original aluminum frames on most Ocean Ridge homes are not impact-rated, not wind-load rated, and typically too corroded to accept laminated glass properly. The assembly has to pass Palm Beach County’s Exposure Category D wind-load requirements as a complete unit. A glass-only swap leaves you with an unrated frame that fails inspection and provides false confidence in a storm. We replace the entire assembly with a rated impact door and marine-grade hardware. Call (561) 940-2917 for a free estimate on sliding glass door replacement.
Plan on 20-35% more. A standard inland-spec impact window with aluminum hardware and zinc fasteners might run $110-$120 per square foot installed in a west Delray Beach neighborhood. The same opening in Ocean Ridge with stainless hinges, hot-dip galvanized fasteners, marine-grade weatherstripping, and refaced rough openings runs $85-$145 per square foot depending on the scope. The material premium is real, but the inland-spec version will require hardware replacement within five to seven years on this barrier island, and possibly frame replacement within ten. Paying the coastal spec once is cheaper than paying the inland spec twice. We write both versions side by side on your quote so the decision is clear.
Ocean Ridge has its own building department with inspectors who know the town’s aging housing stock inside out. They routinely flag impact-window installs on 1960s and 1970s CBS homes where contractors have tried to reuse corroded or out-of-square original rough openings without proper refacing. Non-standard opening sizes in these older homes frequently require custom-ordered impact units, which extends lead times beyond what a stock-size installation in Delray Beach would take. Our team pulls permits for every job and schedules inspections as part of the plan, so the timeline is built in from day one, not discovered mid-project. Call (561) 940-2917 and we’ll give you an honest lead-time range for your specific openings.
You’ll pay for it in condensation, heat gain, and early seal failure. Low-E coatings reject a measurable share of South Florida’s solar heat, and argon gas between the panes improves insulation on a barrier island where HVAC systems run most of the year. Skip either, and the glass unit works harder than it should from day one. Salt air accelerates seal degradation anyway, so a cheaper uncoated unit fails sooner under the exact conditions Ocean Ridge delivers every single day. We specify low-E and argon as standard on this island because the climate demands it. For a full breakdown of what we quote on your home, call (561) 940-2917 and ask for a written line-item estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Ocean Ridge with background-checked, uniformed technicians and a live person who answers the phone 24 hours a day, 7 days a week.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.