Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Ocean Ridge
Door installation in Ocean Ridge runs anywhere from $2,800 for a standard entry door replacement to $45,000 or more for a custom pivot door on a high-end renovation. That’s the honest spread in this town, where every home sits on a barrier island between the Atlantic and the Intracoastal and nearly every older house needs impact-rated work that big-box stock simply cannot fill. TruePane has been installing doors across Palm Beach County for over four decades, and we know Ocean Ridge’s building department, its inspectors, and its older concrete block homes well enough to tell you the truth before the first cut is made. Call (561) 940-2917 for a free estimate, and we’ll measure twice, quote on paper, and register both warranty layers in writing before any order goes out.
Why TruePane Windows & Doors Is Ocean Ridge’s Preferred Door Installation Company
Dale Kessler founded TruePane in 2008 out of a second-generation glazier’s craft tradition, and the standard he set on day one still governs every job: if the pane is not true, the job is not done. Ocean Ridge homeowners, many of whom have lived in the same house for twenty or thirty years, call us because we answer the phone with a live person around the clock, not a voicemail tree. When you schedule an estimate, a background-checked, uniformed technician arrives when we said, measures every opening twice, and puts Andersen, Pella, and Marvin options side by side on paper so you can see exactly what you are buying. We pull permits, pass inspections, and register both manufacturer warranty layers before the truck leaves your driveway. That is the Keystone Standard, and it is in writing on every job.
The response time to Ocean Ridge from our South Florida coordination office is typically same or next day for estimates, and most standard door replacements are completed in a single visit. Our technicians know the mid-century CBS homes on streets like Old Ocean Boulevard and Tropical Drive, and they know what the town’s inspectors flag. That local knowledge saves you from ordering stock units that will not pass or hardware that will pit within two years.
Our Door Installation Services in Ocean Ridge
Ocean Ridge is not a cookie-cutter market. The town’s housing stock runs from original 1960s concrete block ranchers to newly built architectural homes on the ocean side, and the door work follows that same range. Here are the four services we handle most often in town.
Pivot Doors
Pivot doors have become the signature entry on Ocean Ridge’s high-end rebuilds, and for good reason: they handle wider openings than hinged doors and create a clean architectural statement on an oceanfront elevation. But a pivot door on this barrier island is a different animal from one inland. Every hinge, handle, and threshold must be specified in 316 marine-grade stainless or PVD-coated finish, because standard stainless will show pitting from the simultaneous Atlantic and Intracoastal salt exposure within a couple of years. A custom pivot door in Ocean Ridge typically runs $12,000 to $45,000 installed, depending on size, manufacturer, and glass specification. We quote the full build, including refacing the rough opening for marine-grade steel where corrosion has taken the original jamb out of square.
Entry & Swing Doors
Entry door replacement in Ocean Ridge ranges from $2,800 for a basic fiberglass impact door to $14,000 for a custom mahogany or thermally broken steel door on the oceanfront. Most of the town’s older homes were built with single-panel aluminum doors that are neither hurricane-impact compliant nor resistant to the salt-air degradation this town gets from both the ocean and the Intracoastal. We replace them with impact-rated units registered to the home’s address and install weatherstripping rated for continuous coastal exposure. If your existing jamb can be reused, the job is usually done in one visit. If it cannot, we reface it properly rather than shimming a door into a corroded opening.
Double & French Doors
French doors on Ocean Ridge homes face a double assault: salt from the east and west, plus direct wind loading under Palm Beach County’s Exposure Category D requirements. That means standard aluminum French doors sold at the big boxes are not compliant here, and homeowners who install them anyway frequently fail inspection or watch the hardware seize within a few seasons. We install impact-rated double and French doors from Andersen, Pella, and Marvin with stainless hardware and marine-grade weatherstripping. A typical double French door replacement in Ocean Ridge runs $4,500 to $18,000, depending on size and glass package. Custom arched French doors on the town’s older homes are common and require field measurements that most stock units cannot accommodate.
Bifold & Folding Doors
Folding door systems have become popular on Ocean Ridge homes where owners want to open an entire living room wall to a terrace or pool. These are heavier systems, with multiple panels riding on floor tracks that must be perfectly level, and they carry the same hardware requirements as our pivot doors. Stainless or PVD-coated rollers, handles, and track fasteners are baseline here, never an upgrade. Installed bifold systems in Ocean Ridge start around $9,000 for a three-panel unit and climb quickly on wider openings. We measure, order, and install on a written fixed price, with lead times stated before you sign, not after.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ocean Ridge
TruePane is an authorized installer for more than a dozen manufacturer lines, and we quote side by side on paper for most Ocean Ridge jobs. That matters here because not every manufacturer builds a unit that meets Palm Beach County’s coastal wind-load requirements in the sizes Ocean Ridge’s older homes actually need. We keep local parts inventory for common Andersen and Pella hardware and can often replace a failed roller, hinge, or lock assembly on a single visit rather than waiting on a factory order. For custom pivot doors and arched units, we order direct from the factory with lead times quoted in writing before any money changes hands.
Common Door Installation Problems We See in Ocean Ridge Homes
- Salt-air corrosion on standard hardware. Because Ocean Ridge sits on a narrow barrier island with the Atlantic on one side and the Intracoastal on the other, homes get salt-laden air from both directions. Standard zinc or unspecified stainless hinges, handles, and thresholds pit and seize in three to five years here, where the same hardware might last twelve years in Delray Beach or Boynton Beach. We specify 316 stainless or PVD-coated finishes as the floor, not the ceiling.
- Out-of-square rough openings in 1960s-1970s CBS homes. Decades of coastal moisture work on concrete block and wood jambs, and we regularly find openings that have drifted a half-inch or more out of square. Reusing that opening without refacing leads to air and water infiltration around a brand-new impact door. We reface with marine-grade steel and shim to true, then document the correction for the inspector.
- Big-box stock doors that don’t fit and don’t comply. Ocean Ridge’s older homes have non-standard opening sizes, and a stock unit from a big-box retailer frequently will not fill the width or height the original door occupied. Homeowners discover this after demolition, and suddenly the schedule adds eight to twelve weeks for a custom-ordered impact unit. We measure first and tell you whether a stock unit fits before you buy anything.
- Fogged sealed units in coastal glass doors. If fog forms between the panes of a new French door, it is not just humidity. It means the seal has failed, and on this barrier island, failed seals happen faster because the temperature swings and salt residue stress the glass unit. We register both manufacturer warranty layers so a failed seal is replaced under warranty, not out of your pocket.
Pricing for Door Installation in Ocean Ridge, FL
Here are the numbers we quote on paper in Ocean Ridge, without the vague “it depends” that comes from contractors who haven’t done the math. A standard entry or swing door replacement with impact glass runs $2,800 to $8,500. French and double door systems run $4,500 to $18,000. Bifold and folding doors start around $9,000 and run to $30,000 on wide custom openings. Pivot doors are the high end: $12,000 to $45,000 for factory-ordered custom units with 316 stainless hardware and impact glazing. What drives cost here more than anywhere else is hardware specification and refacing: marine-grade stainless adds real material cost, and correcting a 1970s rough opening that has gone out of square adds labor but prevents a failed inspection and a water-damaged jamb two years later. Every estimate is free, every price is fixed in writing before we order, and we do not add change orders after the fact. Call (561) 940-2917 to schedule your free estimate.
We Also Serve Cities Near Ocean Ridge
TruePane installs doors throughout south Palm Beach County. While this page is written for Ocean Ridge homeowners, our crews regularly work in Delray Beach, Gulf Stream, Golf, and Manalapan, and we bring the same Keystone Standard to every job. If you are outside Ocean Ridge proper, our Door Installation team can still serve you, and you can learn more about our local work at Door Installation in Ocean Ridge. The phone number is the same: (561) 940-2917.
Serving Ocean Ridge, FL - Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Ocean Ridge
Because Ocean Ridge is the only municipality in Palm Beach County where every single residential lot sits on a barrier island between the Atlantic Ocean and the Intracoastal Waterway. There is no property in town that does not receive salt-laden air from both directions simultaneously. Standard zinc or unspecified stainless hardware that would function for a decade in Boynton Beach will pit and seize on an Ocean Ridge pivot door within three years, often less. We specify 316 stainless or PVD-coated finishes on every hinge, handle, and threshold as a baseline, and we register that specification in writing on the estimate so there is no confusion later. Call (561) 940-2917 for an exact quote, and we’ll show you the corrosion difference on paper.
Almost never, and Ocean Ridge’s own building inspectors will flag it if a contractor tries. The town’s inspectors are deeply familiar with the local housing stock and routinely catch impact-door installs where crews have reused corroded or out-of-square original rough openings without refacing. On Old Ocean Boulevard, our crew refaced an opening so far out of square from decades of salt-air attack that the client’s first choice of stock Andersen units would not fit; the fix required marine-grade steel and a custom-ordered Marvin unit. Reusing a bad opening leads to air and water infiltration around the new door, and it will not pass final inspection. The correction is cheaper before the door is ordered than after it is hung.
Exposure Category D is the Florida Building Code’s designation for wind-load requirements in the most severe coastal exposure zones, and every residential lot in Ocean Ridge falls under it because the town is a narrow barrier island with open water on both sides. Doors and windows installed here must be tested and rated for higher wind pressures than units installed a few miles inland. That requirement eliminates many stock, off-the-shelf units and forces custom-ordered impact doors on a large share of the town’s aging inventory. Custom orders add eight to twelve weeks to the schedule. We quote lead times in writing before you sign anything, so you know the real calendar before demolition starts. Call (561) 940-2917 to get a lead time on your specific door.
No. Fog between the panes of a sealed double-pane or triple-pane unit means the seal has failed and the insulating gas between the panes has escaped. Coastal humidity does not cause interior fog; a broken seal does. On Ocean Ridge’s barrier island, seal failure happens faster because of the extreme temperature swings and salt residue that stress the glass unit over time. The good news is that a properly registered manufacturer warranty covers seal failure, and TruePane registers both warranty layers in writing before the truck leaves the driveway. If a seal fails on a door we installed, we handle the warranty claim. That is the Keystone Standard, and it is in writing.
Because “stainless” is not a single grade. Standard 304 stainless, which is common on hardware sold for inland use, will show surface rust within a couple of years in Ocean Ridge’s simultaneous ocean-to-Intracoastal salt spray. The fix is 316 marine-grade stainless or a PVD-coated finish, which contains molybdenum for superior corrosion resistance in chloride environments. Many custom Ocean Ridge homes we service were originally built with 304 hardware on pivots and folding doors because the builder did not know the difference. We replace it with 316 or PVD and document the alloy on the invoice so you know exactly what you paid for. If you’re seeing rust on a door less than five years old, call (561) 940-2917 and we’ll tell you what you’re actually looking at.
Get Your Ocean Ridge Door Installation Estimate
If you live in Ocean Ridge and you’re planning a door replacement, a renovation, or a custom pivot door, start with a free estimate from TruePane. We’ll measure every opening twice, quote manufacturer lines side by side on paper, register both warranty layers in writing, and give you a fixed price that does not change once the order goes in. There is no pressure, no surprise line items, and no second appointment left hanging. A live person answers the phone 24 hours a day, 7 days a week. Call (561) 940-2917 to schedule your free estimate today.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Ocean Ridge, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.