Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Margate
Door installation in Margate runs $450-$3,800 depending on whether you’re doing a simple swing-door swap in a CBS ranch off Margate Boulevard or a full tear-out and impact-rated replacement in a Century Village condo. Most entry door replacements we do in Margate run $1,200-$2,600 with installation, and we complete the typical single-door job in one day. Call (561) 940-2917 for a free estimate, and we’ll give you a written line-item quote before any work starts.
We’ve spent years in South Florida’s glazing trade because we learned early that a door that binds in July, leaks during a tropical storm, or fails HOA review the week after install costs more than the job itself. Margate presents a specific set of conditions: CBS construction from the 1960s through the 1980s, condo association oversight that predates the internet, and wind code requirements that most homeowners don’t discover until their insurance carrier sends a non-renewal letter. The Door Installation team at TruePane Windows & Doors knows this terrain because we work in it every week, not because we read about it in a franchise playbook.
Why TruePane Windows & Doors Is Margate’s Preferred Door Installation Company
Margate calls us for the same reason any homeowner who’s been burned once calls us: we answer the phone with a live person every time, and we put our name in writing on both warranty layers before the truck leaves your driveway. Dale Kessler founded TruePane in 2008 with a rule that’s still on the whiteboard, if the pane is not true, the job is not done. That applies to a $600 storm door on a ranch house in the Watergate Estates section as much as it does to a $4,000 arched custom entry in a lakeside home off Rock Island Road.
Our crews know Margate’s housing stock. We’ve pulled permits from the building department, we know which HOA boards require architectural review packets with manufacturer cut sheets and color chips, and we schedule work around the noise rules that govern shared-wall condos. When you call, you get a straight answer about timelines, not a callback. That matters when you’re a snowbird coordinating a project from New York and want to know if the job can be done before you fly down for the holidays.
Most door installs in Margate start with a free on-site measurement, a written quote that states every dollar, and a permit pulled before the first screw goes in. We stand behind the work with our Done Right Promise. If something isn’t right, we fix it. No fine print, no arguing.
Our Door Installation Services in Margate
Entry & Swing Doors
Entry doors in Margate take a beating from the humidity and the summer rain. The original hollow-core builders’ doors on 1970s CBS houses warp in the wet season, and the aluminum thresholds corrode where sprinklers overspray onto the front stoop. We install fiberglass and steel swing doors with proper weatherstripping, impact-rated glazing where code requires it, and new thresholds anchored to the slab so water doesn’t chase you inside. A typical entry door replacement in Margate runs $1,200-$2,800 installed.
Double & French Doors
French doors in Margate’s older homes often sit in openings that were never flashed properly, so the subfloor rot begins behind the hinge side and works inward. We don’t slide a new prehung unit into a compromised opening. We tear out, repair the framing, flash with butyl tape, and set the door plumb so it swings true in every season. Double French door installs in Margate typically range from $2,200-$4,200, depending on whether the existing opening is square and whether impact glazing is required for the exposure.
Storm Doors
A storm door on a Margate home does double duty: it protects the main entry door from direct sun and rain, and it gives you ventilation during the months when you’d rather not run the AC all afternoon. We stock and install full-view and ventilating storm doors, including heavy-duty models that hold up to Broward County’s wind-driven rain. Storm door installs in Margate run $450-$1,100, materials and labor included.
Pivot Doors
Pivot doors are a statement piece, and in Margate they also have to be code-compliant, which means the hardware and the latching system must earn a Miami-Dade NOA rating. We’ve installed oversized pivot entries in custom lakefront homes off Royal Palm Boulevard where the door exceeds 8 feet and the hinges carry several hundred pounds. Pivot door installation in Margate starts around $3,200 and ranges up from there based on size, cladding, and hardware. This is not a fastener-and-shim job; it’s an engineered installation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Margate
TruePane is an authorized installer for more than a dozen manufacturer lines, including. We don’t push a single brand because we don’t stock a single brand. We quote manufacturer lines side by side on paper, so you see exactly what you’re buying, what each warranty covers, and how long each layer runs before you sign anything. If you already have a door you like that’s binding, leaking, or failing HOA review, we service those too. We keep common hardware, weatherstripping, and seals stocked locally for Margate customers, which means shorter turnaround on repairs and replacements.
Common Door Installation Problems We See in Margate Homes
- HOA rejection after purchase: A homeowner buys a new front door or sliding glass unit, only to find the Century Village board never pre-approved the style or finish. Now the unit is non-returnable and the homeowner is out $1,500. We prepare HOA-ready proposal packages with color chips and spec sheets before you order, not after.
- Water intrusion from insert replacement over rotted CBS jamb: A prior installer slid a new door into an old frame that had rot hidden behind the stucco. The flashing was never repaired, so the leak returned within a season. We tear out down to sound framing and re-flash properly before setting the new door.
- Code-enforcement stop-work on a condo wall: We’ve seen fine notices stuck to doors because a contractor started a noisy tear-out before the association’s 9 a.m. work hour. That’s why we schedule all shared-wall work inside the HOA’s posted hours and notify the board in advance.
- Wind code non-compliance on aging aluminum doors: Original 1960s aluminum sliding doors in Margate condos don’t meet current wind-borne debris requirements. Insurance carriers in Broward County have been non-renewing policies on units with non-impact openings. We install impact-rated doors that carry the Florida Product Approval numbers your carrier wants to see.
Pricing for Door Installation in Margate, FL
Door installation pricing in Margate breaks down like this:
| Service | Typical Margate Range (Installed) |
|---|---|
| Storm door | $450-$1,100 |
| Entry door replacement | $1,200-$2,800 |
| French or double door | $2,200-$4,200 |
| Arched or custom entry | $2,800-$6,500 |
| Pivot door | $3,200+ |
In Century Village, there’s an added layer: HOA architectural review can push your timeline by a week or two, and if the board is pursuing a bulk replacement contract, your per-unit price may shift depending on the negotiated volume. That’s real estate, not a fee. We walk every Margate quote through the actual conditions at your building: access, parking, shared walls, and the board’s published specifications. Call (561) 940-2917 for a free estimate. You’ll get a number in writing.
For homeowners 55 and older, we offer a permanent 5% discount on any door installation. Seniors and veterans always get that. We’ll also apply the $50 repair credit on any work over $250 if you’re combining a door replacement with a hardware fix.
Working on a Tight Margate Lot or Condo: What Actually Affects Your Price
This is the part most generic Door Installation pages never cover. Margate was built dense, and density changes how a job gets priced and staged. A single-family CBS ranch on a 6,000-square-foot lot off State Road 7 leaves our crew a driveway to stage on. A second-floor condo unit in a Century Village building leaves us one assigned parking space and a three-foot-wide walkway. We factor that in before we quote.
Shared walls mean we cannot start a tear-out at 7:30 a.m. even if we wanted to. Most Margate condo associations post work hours between 9 a.m. and 5 p.m., Monday through Saturday, and we schedule inside those hours as a matter of policy. We also notify the board and the adjacent unit before the job starts, not as a courtesy, but because a neighbor filing a noise complaint on your behalf is slower and more expensive than a ten-minute conversation ahead of time.
Century Village deserves a paragraph on its own. Every door replacement there must clear HOA architectural review first, and many boards are now pursuing community-wide bulk contracts so every unit gets the same style, color, and hardware. If that’s happening in your building, the smartest move is to ask us to prepare a proposal that matches the board’s published spec. We’ve done phased, multi-unit installs in Century Village Margate, and we know the difference between a board that wants homeowner-by-homeowner review and one that’s ready to sign a building-wide contract. That’s why the Door Installation in Margate landscape is different from any other Broward city we work: insurance pressure from non-impact openings is driving replacement decisions here faster than aesthetics ever could.
We keep a constrained site clean. Drop cloths on the walkway, materials staged in the one space we’re assigned, and every scrap of old jamb, old stucco, and old hardware hauled away the same day. Your neighbors should notice we were there only because your door looks right and the hallway is cleaner than we found it.
One job comes to mind: our crew replaced a corroded aluminum sliding door in a Century Village Margate unit where the original jamb had rotted behind the stucco. That meant a full tear-out and re-flashing with butyl tape before we set a Miami-Dade impact-rated sliding glass door. We coordinated the HOA’s pre-approved color and hardware spec, staged materials in a single assigned parking space, and completed the swap between the association’s 9 a.m. and 5 p.m. work hours without a single neighbor complaint. That’s the standard on every Margate door we touch.
We Also Serve Cities Near Margate
TruePane also handles door installation for homeowners in Coconut Creek, Pompano Beach, Deerfield Beach, and Boca Raton. If you live just outside Margate, the same years of glazing craft, the same live-person phone line, and the same written warranty apply. Call (561) 940-2917 and tell us what you’re working on.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Margate
Yes. Century Village’s condo boards require architectural review before any door replacement, and many boards have pre-approved spec sheets you’ll need to match down to the color and hardware finish. If you skip the review and install first, the board can require you to remove and replace the door at your own expense. We prepare HOA-ready proposal packages with manufacturer cut sheets, color chips, and hardware samples before you buy, so the review moves faster. Call (561) 940-2917 and we’ll pull the current spec for your building.
Usually not, and here’s why: Margate’s original 1960s and 1970s CBS homes were built with aluminum frames that are now corroded, and the rough opening behind them often has hidden rot or failed flashing. Insert replacement puts a new door into a compromised frame, which is a guaranteed leak down the road. We tear out to sound framing, re-flash, and set the new impact door plumb. For an exact quote, call (561) 940-2917; estimates are free.
We stage in the single driveway or the one assigned parking space the association gives us, and we keep everything off the grass and out of the neighbor’s way. For condo work, we bring a drop cloth walkway, work inside the building’s posted hours, and haul every scrap of debris out the same day. If your lot has tight access, tell us on the first call, because it affects how we schedule the delivery and the crew.
Most single-family neighborhoods in Margate have noise ordinances that restrict construction work to daytime hours, typically after 7 or 8 a.m. and before sunset. Condo associations are stricter; Century Village and similar buildings typically post work hours between 9 a.m. and 5 p.m. We schedule inside those windows and notify the HOA board and adjacent units in advance. Call (561) 940-2917 if you have a specific building rule we should know about before we quote.
Because the insurance carrier is usually threatening non-renewal on the unit’s policy over non-impact openings, and windows and sliding glass doors are the two largest unprotected spans in the wall. In Century Village Margate specifically, thousands of units still have original single-pane aluminum windows and jalousie panels alongside 1960s aluminum sliders. Replacing them together means one permit pull, one HO A review, one day of staging, and one written warranty that covers both. It’s the most efficient way to get the impact ratings your carrier wants to see on file.
If you’re in Margate and you want a straight answer about your door, call (561) 940-2917. A live person picks up every time. We’ll schedule a free estimate, measure your openings twice, and put every dollar in writing before you commit.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Margate with years of glazing craft behind every door we set.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.