Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Energy-Efficient Windows in Delray Beach: What to Know First
TruePane Windows & Doors repairs and replaces Therma-Tru energy-efficient windows in Delray Beach, typically within one to two weeks of your call depending on parts availability. Most Therma-Tru jobs run between $340 and $1,900, and every estimate is free with a written line-item quote before any work begins. If you own a Therma-Tru unit that’s fogging, leaking air, or failing an energy audit, call (561) 940-2917 and a live person will answer.
This page is for Delray Beach homeowners who bought a Therma-Tru product, lived with it for years, and are now noticing the signs that the energy performance is slipping: condensation between the panes, drafts at the sash, heat radiating through the glass in August. We’ll walk you through how these products fail, what it costs to fix them, and why the warranty on your paperwork is worth less than you might think unless someone registered it properly.
Key Takeaways
- Independent Therma-Tru service provider in Delray Beach - not manufacturer-affiliated, not restricted by corporate parts pipelines.
- Seal failures and sash warpage are the two most common Therma-Tru energy-loss problems we see in coastal Palm Beach County.
- Most repairs are completed in a single visit; full unit replacements take one to two weeks.
- Every job comes with The Keystone Standard: both warranty layers registered in writing, durations stated, before our truck leaves your driveway.
- Free estimates. Call (561) 940-2917.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru is better known for its entry doors than its patio door and window lines, and that matters in Delray Beach. The salt air and humidity here find weaknesses that don’t show up in a showroom. We’ve worked on enough Therma-Tru units in Delray Beach to know exactly where they give out and why.
- Seal failure in the Slim-Line sliding patio door series. The Slim-Line’s narrow profile leaves less room for the insulated glass unit’s edge seal, and after eight to twelve years of Delray Beach sun exposure, the seal separates. You’ll see moisture between the panes in the early morning, then it clears by noon. The fix is a new insulated glass unit with a thicker sealant bead than the OEM spec calls for. We have glass fabricated with a wider polyisobutylene seal specifically for coastal applications.
- Sash warpage on Therma-Tru casement windows in western Delray Beach homes. The newer construction subdivisions around Hagen Ranch Road and along Atlantic west of I-95 see a different problem than the beach blocks. The Therma-Tru casement sash is a vinyl-welded frame, and repeated heat cycling from full afternoon sun causes the sash corners to shift. You’ll notice it as a gap at the top corner where the weatherstripping stops making contact. The fix is usually a replacement sash, not a full window replacement, and we match the weld profile exactly.
- Hardware fatigue in the Thermal-Gard double-hung line. The balance system on Thermal-Gard double-hungs uses a block-and-tackle assembly that loses tension over time. When the balance fails, the sash drops and the lock-to-keep-tilt mechanism lets air in around the meeting rail. We replace the balance system with a heavier-duty unit rated for 1,500 cycles over the OEM’s 1,000.
- Frame sealant deterioration at the rough opening on Therma-Tru fixed picture units. This one isn’t the window’s fault, it’s the installation. In Delray Beach’s older neighborhoods like Lake Ida and Seacrest, we see Therma-Tru fixed units where the original installer used a cheap butyl tape at the flange. After ten years, the tape has dried out and salt moisture has worked its way between the frame and the sheathing. The energy loss shows up on thermal imaging as a cold (or hot) halo around the entire frame. The fix is removing the frame, cleaning the rough opening, and resetting with a polyurethane sealant that stays flexible. We measure every opening twice before we order the replacement window.
- Low-E coating degradation on early Therma-Tru units facing east above A1A. The first-generation Low-E coatings Therma-Tru used in the late 1990s and early 2000s had a soft coating applied to the interior surface of the outer pane. Salt air intrusion, even minor, etches that coating over years. The glass starts to look hazy and the reflectivity drops. You lose the Low-E benefit without ever seeing an obvious seal failure. The fix is a glass replacement with a modern hard-coat Low-E, which doesn’t have this vulnerability. This is an information point you won’t find on the Therma-Tru website: they don’t discuss the coating chemistry of their legacy units.
Our Therma-Tru Energy-Efficient Windows Process
- 1
Call and talk to a live person. No phone tree, no callback form. You’ll describe the symptom, and we’ll tell you honestly whether it sounds like a repair or a replacement.
- 2
Diagnostic visit. A background-checked, uniformed technician comes to your Delray Beach home with a thermal camera and a moisture meter. We test the seal, check the sash alignment, and measure the glass-to-frame gap on all four corners of every opening.
- 3
Written quote, side by side. We put our recommendation in writing, and if a replacement makes more sense than a repair, we quote manufacturer lines side by side on paper. You see exactly what you’re buying and what it costs. No surprise line items later.
- 4
Parts decision. If we’re repairing, we source what the job needs. OEM parts when they’re available and worth it, quality aftermarket when the OEM option is the weak link (like the balance systems and the coastal sealants I mentioned earlier). We explain the difference in plain language and put it on the quote.
- 5
The work. We remove, repair, or replace. Every opening is measured twice before we order anything. Most repairs are done in one visit.
- 6
Testing and the guarantee. After installation, we run a blower-panel smoke test on the repaired unit and a visual air-infiltration check to confirm the weatherstripping makes contact. Then we register both warranty layers - ours and the manufacturer’s - in writing before we leave. Durations stated, no fine print that covers neither. This is The Keystone Standard, and it’s our name on the line when we hand you that paper.
What Therma-Tru Energy-Efficient Windows Costs in Delray Beach
| Job Type | Typical Range |
|---|---|
| Single-pane glass replacement with standard clear glass (fixed unit) | $340-$575 |
| Insulated Low-E glass unit replacement (seal failure repair) | $475-$850 |
| Sash replacement (warped casement or failed double-hung) | $390-$720 |
| Full window replacement, mid-range THERMA-TRU | $900-$1,900 per opening |
| Full window replacement, premium/impact-rated | $1,600-$3,200 per opening |
| UV-blocking or solar tint retrofit on existing Therma-Tru glass | $285-$650 |
| Window energy audit (thermal imaging + seal testing) | $89 (maintenance visit) |
What moves these numbers is glass package, ID, frame condition, whether you need laminated or impact-rated glass, and whether the unit is accessible from the ground or requires ladder work. Delray Beach homes east of Federal Highway often require impact-rated replacements, which adds cost. We’ll give you the exact number in writing before any work starts. Call (561) 940-2917 to schedule your free estimate.
Why Delray Beach Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We’ve been serving Delray Beach since 2008, and Dale Kessler founded TruePane in 2008 out of a rule that’s still on the whiteboard: if the pane is not true, the job is not done. That’s not a slogan. That’s a standard, and it covers every Therma-Tru job we take on. We’re an independent Therma-Tru service provider, which means we’re not handcuffed to Therma-Tru’s parts pipeline. We also work on PGT, CGI, CWS, and ES Windows, so if a full replacement with a different manufacturer is the right call for your Delray Beach home, we’ll quote those side by side. Every job is covered by our Done Right Promise: if it’s not done right, we make it right - no paperwork, no arguing. A live person answers our phone every hour of every day, and the technicians we send are background-checked, uniformed, and trained to work in your home the way they’d work in their own mother’s house.
FAQs
No. As an independent provider, we don’t void Therma-Tru’s manufacturer warranty when we repair or replace glass, as long as the original window was installed correctly and the warranty was registered properly. The problem many Delray Beach homeowners run into is that the warranty was never registered in the first place, or was registered by a contractor who’s since disappeared. We register your warranty layers in writing before our truck leaves the driveway, so there’s a record with dates and durations. Call (561) 940-2917 if you want us to check your paperwork during a free estimate.
A seal failure repair on a Therma-Tru unit typically costs between $475 and $850 for the replacement insulated glass unit. The exact price depends on whether the glass is Low-E, tinted, or impact-rated, and whether the unit is a standard rectangle or a custom shape. We’ll quote you a written line-item price before we order anything. Call (561) 940-2917 for a free estimate.
If we have the glass or parts in stock, yes - most Therma-Tru repairs in Delray Beach are completed in a single visit. If we need to order a custom-sized insulated unit, it’s typically a one-to-two-week turnaround. Either way, we’ll tell you the timeline before we start, and we’ll be there when we say.
Repair is usually the right call when the frame is still square and the failure is in the glass, the sash, or the hardware. Replacement makes sense when the frame itself has deteriorated, the sealant at the rough opening has failed multiple times, or you need impact-rated glass that your current frame won’t support. We’ll show you both options on paper with honest numbers, and we won’t push a replacement when a repair gets you another decade. Call (561) 940-2917 and we’ll talk through it.
Yes. We offer a free written repair estimate, and a permanent 5% discount for seniors and veterans. The maintenance visit, which includes a basic energy check on your windows and doors, is $89. If it is not in writing, it is not a guarantee - it is a conversation, so every discount and every warranty layer goes on your written quote. Call (561) 940-2917 to schedule.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Delray Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.